I'm shocked on how little power they want in the kitchen. One outlet on the island? Wait until the kids want to plug a phone or lap top in or they are stinging an extension cord across it to use a blender on the other end. The Refridge/stove/freezer wall sounds a bit scary also. Stove next to a fridge is almost always a no no. You need countertop on both sides of the stove, period.
Knob or pull? Bronze or silver? Small or big? Kitchen cabinet hardware is more than just a pretty decoration; knobs and pulls keep your cabinet cleaner and protect the finish. Plus, while they’re little, they can actually make a big impact on your kitchen’s appearance. But with thousands of options out there, how can you select the right hardware to make the best impact? Take these things into consideration before you make your final kitchen cabinet hardware selection.
“People come in and say they have a ‘standard’ door,” says Renee Genereux of the Brandino Brass team. “But there is no such thing as standard. You need to know your door thickness, how does it swing, what’s the width, what kind of holes do you have.” Avoid multiple visits to the hardware store because you don’t have all of the information and measurements you need. “We give them all of the questions to answer and then they come back with all of it.” Call Brandino Brass ahead of time to ask what you need to know for your visit or check out the sheet below as handy guideline for getting to know your doors and cabinets better.

Go to the home improvement center and get a 35mm Concealo Hinge mounting kit, it comes with a forstner bit (invented by Benjamin Forstner, in case you didn’t know) and a jig for marking the drill location. You’ll also want to make sure you get 35mm European-style hinges too, but before you buy them you’ll need to determine if you have ½” overlay or full overlay doors. ½” overlay doors overlap the face frames by a ½”, full overlay doors fully overlap the face frame leaving about an 1/8” showing on the outside edge. My doors were all ½” overlay, so I bought eighty 3-way adjustable hinges from eBay. I’m not sure what I was thinking because I ended up with a LOT of hinges left over. Warm up your drill and let’s move on to the next step.


So here’s how this works. On the new cabinets I ordered, the center of the hinges were 4 1/2″ from the bottoms and the tops of the doors, so that’s the measurement I used for drilling on my old doors. The original hinges on the old cabinets were placed at about 3″ from the ends, so I didn’t have to worry about the old holes interfering with my new ones.
In my opinion, going to a specialty showroom and paying the extra expense is worth it, because you’ll find choices outside the mainstream and you can get expert help there. These come from the selection at The Plumbery, a kitchen and bath fixture store in Northern California. Here you can see glass knobs, swirly knobs, modern knobs — all just a tad pricier than conventional choices at a hardware store. But look at the workmanship and style, even the heft. Though the average kitchen has 20 to 40 knobs, you might want to splurge for something unique.
It’s definitely possible to change out the hinges without redoing the cabinets – you would just have to make sure that the holes on the frames where the old hinges were, are able to be filled and touched up so that they’re not obvious. I’m not sure of the cost, but hinges aren’t cheap, and I definitely recommend using a carpenter to do the work. Hinges can be maddening!
While it is important to stay true to your personal style, you don’t want a lantern that is half the height of your door or an oversized mailbox beside a tiny cottage. So, take into account what you are working with as you choose the style that is most you! “I suggest they get painter’s tape and put it on the house in the dimensions of the fixture to get a sense of the size. You want it to be the correct proportion,” says Brandino Brass team member Megan Brasher, adding, “To get the feel for how it will affect your home’s curb appeal, not only do you need to look at it right next to the front door, but you also need to take a step back and get a view from the street.”
DoItYourself.com®, founded in 1995, is the leading independent home improvement and repair website. We welcome your comments and suggestions. All information is provided "AS IS." Website operating problems contact [email protected] Questions of a Do It Yourself nature should be submitted to our "DoItYourself.com Community Forums". Copyright© 1995-2018 MH Sub I, LLC dba Internet Brands. All rights reserved. You may freely link to this site, and use it for non-commercial use subject to our terms of use. View our Privacy Policy here.
SimplyBeautifulKitchens.com is a participant in the Amazon Services LLC Associates Program and other affiliate programs, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com and other merchants websites. You should always perform due diligence before buying goods or services online. The Owner does not accept payment or merchandise from manufacturers in exchange for writing reviews.
If you’re going to paint or re-stain your cabinets now would be a good time to do that. I’m a painted wood kind of gal, so these cabinets got painted, plus it’s a lot quicker and easier to paint them than to sand and re-stain. After the doors and frames have been painted it’s time to install the hinges and the glass. Since my upper, upper cabinets will rarely get used I secured the glass with silicone, if your glass cabinets will get daily use then you might want to use silicone and glazing points. I also put removable frosted film on my glass because after we added puck lights to the upper, uppers I realized how ugly the inside of the cabinets looked.

The quick answer is yes, you can change the hinges. The hard part is what type. Cabinet doors have lots of different configurations.....full overlay, partial overlay, inset, etc., etc. The hinges have to fit the door style. There are hidden hinges that screw to the cabinet framework without major holes, and there are European type hinges that require a large hole to set the hinge into. Go to big box and look at the hinges, what is available can be mind boggling, until you understand the type of door you have.
If you’re going for wood paneling, the process is pretty simple. Fasten the pieces together and cut to the size of your appliance. Then, remove the handles from your appliance and glue the panels onto the front using a hot glue gun. You can either paint the wood and the sides of your appliance to match your cabinets, or you can leave it as is for a natural unfinished feel. Complete the look by adding new appliance pulls to match the rest of your kitchen hardware. Appliance covers can be added to just about any kitchen appliance that has a door like a refrigerator and dishwasher.
Knobs have been around forever, and still function as a clean and classic hardware, with loads of practicality. Especially for cabinets that get used the most, knobs are still a perfect fit. Pay close attention to the color and size of knobs for white cabinets, and also be mindful of the finish. Are you looking for a shiny finish to match your white, modern kitchen? Or perhaps you prefer a matte finish, to accentuate your country style kitchen.

Try to establish some sense of visual symmetry. If you are going to mix styles, the secret to having it look great is to counterbalance the mixing and matching with a semblance of symmetry. For instance, make sure all your drawers have the same number and configuration of knobs. Perhaps all drawers of the same size should share the same knob, and smaller drawers can display a different type.
The first thing you need to consider when looking for new cabinet hardware is the overall look you would like for your kitchen. There are literally thousands of drawer pulls and cabinet knobs to choose from, so you need a starting point. Many cabinet styles are easily adaptable to any style of knobs — modern, traditional or even funky. Spend some time gathering pictures of kitchens you like from home magazines to help you choose a style that suits your tastes.
Though not as common as stainless steel or brass, pewter is a very traditional western metal to use in a kitchen. It has a long history dating back around a thousand years — the “Worshipful Company of Pewterers” was even formed in 14th-century England to regulate pewter quality. By the time it began making its way onto furniture in the 1700s, it was a centuries-old art.
Here are the three different kinds of kitchen cabinet doors that demonstrate the different overlays and hinge options.  The first is similar to what I’m working on now – a framed cabinet with an overlay on the cabinet frame.  The second is a framed cabinet where the doors are inset, flush with the cabinet frame.  And the third is a frameless cabinet where hidden hinges are utilized.
Try to establish some sense of visual symmetry. If you are going to mix styles, the secret to having it look great is to counterbalance the mixing and matching with a semblance of symmetry. For instance, make sure all your drawers have the same number and configuration of knobs. Perhaps all drawers of the same size should share the same knob, and smaller drawers can display a different type.
Under-cabinet lighting serves not only a fashionable purpose by creating visual depth in your kitchen, but it serves a functional purpose as well. The added lighting will make everything from chopping veggies to reading recipes to measuring ingredients easier to see as your countertops will be under direct light from above. And as far as style goes, the right lighting can make all the difference!
Thank you so much for helping me understand more about the process to choose new kitchen cabinet hardware. We have been really into rustic looking kitchens lately, and I think that some antique decorative nails could really change the way it looks. Just as you mentioned, you can always change the look of your kitchen again if you do not like the way it looks after a couple of years. Thanks for posting!
Hinges creak, wear out, discolor or even break over the years. They can also bend. This makes cabinet doors fit poorly. New hinges can update any set of cabinet doors no matter how old they are, and real estate agents often recommend replacing old hardware to help sell your home. Whether you're moving, doing a remodeling job or your kitchen just needs a bit of TLC, you can change your hinges out in one afternoon. Hinges are designed to fit square on the side of the door, making it simple to get the hinge alignment correct -- even if your doors are older than you are.
Updating the hardware on your kitchen windows can take them from standard to standout in seconds! Typically, window sash locks and lift pulls blend in with your window color, but switching these traditional styles up with an elegant bronze or a satin nickel finish will add interest and pizzazz to your windows. You can also choose a finish that matches the rest of your kitchen hardware for a pulled together style.
Knikki Grantham is a Trend Manager with over 20 years in the Furniture and in the Furniture and Design Industry. She grew up in the furniture industry with early memories of sawdust and hand tied springs. After working in various phases of furniture production and development she moved into Design Sales for a Luxury high-end retailer, attaining an Associate ASID as well as other accreditations from various furniture manufacturers.
Contemporary kitchens have sleek lines, very little ornamentation and minimalistic colors. So, for a contemporary style kitchen, it is wise to choose hardware that is simple and streamlined. Linear bar handles with straight lines or curved barrel handles are the perfect choice. Since stainless steel appliances are a hallmark of a contemporary kitchen, you can also select handles for your cabinetry in a similar style and finish as your appliance handles. 
Kitchen cabinet knobs can really change the look of your cabinets. The best knobs and handles not only suit the cabinet style, but also add to the theme or mood of your kitchen. For example, the warm appeal of hammered copper cupboard handles blends well with rustic kitchens, while the cool sparkle of crystal knobs looks elegant against dark wood cabinets.
Hello Mr. TretheweyMy name is terry cotto, when we built our beautiful home 16 years ago, in Sierra Madre Ca I had my claw tub installed,( my child hood remembrance) It appears, that the claw legs of the tub were not installed properly, and one leg fell off , tub was slightly tipping to the right. I had a handyman come over and reinstall the claw legs, tighten so this would not happen again. The other day, while I was bathing I noticed the seal of the drain on the outside rubber was not laying properly, plus it was leaking, ( I think this was due to the leg falling off and unbalancing the ring. Well, now I really don't know what to do about that. I believe the thing to do is remove the cover off the top drain , ok, but than what do I have to move the claw tub, impossible. How do I replace the rubber of the outside of the top drain pipe, it appears to be brittle. (Not good)Please answer my questions, and I will hire the handy man again to help me. Thank you. I have learned so much from T.O.H weekly shows, I am a loyal fan at 75. I tell my 80 year old husband, you need to watch these shows with me, and we can do it ourselves, the right way. God Bless you all for the great job your doing, I need to know how to do it right, so it doesn't happen again. a picture would be good, I can see exactly how its done?
For oversized cabinetry you’ll obviously want to use larger hardware.  Oversized cabinets and drawers are defined as over 3 feet wide. Cookware drawers or built-in appliance cabinetry are usually oversized.  For these large drawers and cabinet doors, consider long pulls which typically come in widths of 6”, 8”, 10” or 12 inches.  Some contemporary pulls are even larger than 12 inches.  That measurement is taken from the center of one screw hole to the center of the second screw hole).  Oversized knobs  are 1-1/2” or larger.
These industrial-feeling pulls are a blend of colonial and Arts and Crafts, and come in a wide variety of finishes. While these black ones are a good choice with the black appliances and lighting, don’t feel your knobs must match all the finishes in your kitchen; it’s OK to mix things up. Just don’t mix the knobs and hinges on the same door; those definitely should be coordinated so one doesn’t detract from the other.
I had already chosen polished nickel hardware (which I will share more about soon), so my hinges needed to coordinate.  I decided to use Rub n Buff to give them a much-needed update.  If you don’t know, Rub n Buff is a fantastic metallic paste used to give almost anything a metal finish.  I chose it because it is so easy to use and gives a lasting finish.
Often, the hardest part in updating your kitchen hardware is deciding what will look best in your kitchen. The installation can be a simple DIY that will likely take less than two hours. However, if your kitchen cabinet hardware requires more than just a few screws but rather new fittings on your cabinets or drawers, contact a pro to ensure all of your new hardware fits perfectly.
Use the same guidelines for or your interior doors. If you like the idea of statement door knobs and hinges, go for lots of contrast— dark door knobs and hinges on light doors, for example.  As an aside, interior door levers, which you simply have to push down, are easier for aging hands to operate as compared to door knobs, which you have to twist.
One of the first reccomendations I give on choosing hardware, is on wide drawers. Go with a single larger handle especially in the kitchen. The kitchen is a busy area and users find themselves with something in their hand when they go to open a drawer with the free hand. If there are 2 pulls on a drawer, just using one will end up tweaking the drawer in the long run. When I begin to look for a hardware collection always look at the range of sizes in that collection. I like the rule of the larger the drawer the larger the handle... or the more weight the drawer will hold the wider the stance should be that the handle provides.

Installing new hinges can be easy, but only when choosing the correct cabinet hinge upgrade. The door style, door thickness, and hinge type, all play a role. Once this information is obtained, you should be able to find a soft-close hinge that is a direct retrofit to the existing hinge, or choose one of the many independent dampers and keep your current hinges.
Pulling design from old pharmacies and soda fountains, latch hardware is that without a doubt a nostalgic throwback. Maybe not the most functional if you’re in a hurry, but handy if you’re looking for a little extra security from pets or children. Latches are another hardware type that can easily be mixed and matched, so maybe just keep them to the lesser used cabinets.
I am taking on more and more cabinet refresh projects (for hire), and still never tire of the transformations.  My latest project is an oak, galley style kitchen, and I’m digging deeper into ideas to make these older kitchens look more modern.  Paint is obviously a big hitter in terms of updating a kitchen, but let’s talk about something else that is equally powerful – cabinet hinges.

Let’s talk first about metals. As a general rule, I like to keep the different metals in a kitchen to no more than two. If you have stainless steel appliances, that counts as one metal. So that leaves one other metal you can bring into a kitchen. If you’ve got brass light fixtures, that’s your one other metal. Your new hardware should be nickel or brass.

×