As latches like these are elements that people come into contact with every day — literally gripping them for support or activating them with a gentle nudge — architects should keep both aesthetics and functionality in mind when specifying these seemingly simple components. To help you as you search for kitchen hardware on Source, here are a few savvy choices that fit well with modern clean spaces; ones that, even when situated in repetitive rows, won’t take attention away from sleek cabinetry design:
Handles are sold by the center to center measurement(1). Center to center can be spelled out or the universally known “C/C” could be used. Knobs are sold by the diameter(4) of the knob.The measurement could be in inches or millimeters (MM) CabinetParts has both measurements listed for your convenience. (Tip: to convert millimeters to inches use this formula: MM ÷ 25.4)Here is a diagram showing how these are measured:The overall length(2) and the projection(3) are offered when they are available from the manufacturer.Choosing a finish is going to be entirely up to you. Maybe your cabinets need a satin nickel look for a more modern look or maybe you are in the mood for flat black finished hardware for a more southwestern feel, or maybe weathered copper is your fancy. There are many, many choices for finish to make your kitchen look like a million bucks.The type of handle or knob will depend on what you like or maybe the motif of the rest of the room or house. There are modern, eclectic, or traditional looks and more.Most collections will have a pull and a knob that “match” so you can have the same finish throughout the room. You do not always have to choose pieces from the same collection, just remember to always choose the finish from the same manufacturer. Even though different manufacturers may have finishes that have the same name, they will often vary in the color and shade.These choices will be among the most important of the entire project. A knob and pull will put the finishing touch on the project and be one of the first things people will notice.Sometimes the hardware is noticed before the color or type of cabinet or door.Here is a listing of all of the manufacturers CabinetParts.com offers: Top Konbs, Amerock, Schaub and Co, Atlas Homewares, Notting Hill, Berenson, Jeffrey Alexander, Century Hardware, Hickory Hardware, Laurey Hardware, Liberty Hardware, Elements, Stone Mill Hardware, Hafele, R. Christensen, MNG Hardware, Acorn Mfg.Some of the companies listed above also offer Bath Hardware and Decorative Home Accents that may help complete a project.
Hi Angie, I think that over time the rub n buff would rub off of the hardware from repeated touching. My hinges still look good two years later, but I can still see places where the finish is starting to rub off and the hinges are almost never touched. I do think that you could update your hardware with a good spray paint though. Just be sure to clean them thoroughly and use a spray primer followed by spray paint. I have update furniture hardware this way that is still going strong almost 10 years later. Good luck!
Wow, love the progress you’ve made ! Thank you so much for these posts , your ideas are wonderful and I love your style. The drawer pulls are lovely, just what I had in mind, but the glass knobs ? What a lovely idea, I have glass knobs on my interior doors, but hadn’t thought of using them on kitchen cabinets . LOVE it . Can’t wait to see the finished kitchen, what an amazing difference .
Cup pulls add a unique style to drawers by going beyond the basic drawer handle. Whether you’re looking for a way to add antique or rustic style to your kitchen or you want to add modern flair, cup pulls enhance any décor. Since cabinet pulls are used frequently each day, look for quality metal styles that are durable and built to last. Cup pulls also come in interesting shapes and designs like leaves and clamshells to give your kitchen a fun aesthetic.
Knobs only: The benefit of cabinet knobs is that they are typically less expensive than bar and T-pulls, and they only require one hole to be drilled into your cabinetry. A single cabinet knob can be installed on cabinet doors, but you may want to consider placing two knobs on larger drawers. Cabinet drawers are heavier than doors, therefore you may need that extra knob for ease of use. The minimalistic style of using knobs only for your cabinetry can give a very appealing look to your new kitchen.
Finally, one of the more technical parts of cabinet hardware are the ball-bearing slides or tracks and latches that are used to open and close drawers and cabinets. Sliding tracks are what allow drawers to open and close smoothly, and using drawer slides that have soft-close ball bearings allow them to close slowly so that they don’t make much noise or rattle everything inside. Drawer slides are available in side-mount, center-mount, and undermount versions, depending on the amount of space you have between the drawer and the cabinet opening.
I have the exact hinge you mentioned under the caption “Then there are Overlay Hinges where you can see part of the hinge as well.” My problem is that on the 3 sets of doors we have that have no center stile, the doors are pushed too far toward center, therefore not enough space to close properly. Any suggestions other than taking down the doors and planing them? Hate that option on already completely finished doors. Great informative post.
It’s definitely possible to change out the hinges without redoing the cabinets – you would just have to make sure that the holes on the frames where the old hinges were, are able to be filled and touched up so that they’re not obvious. I’m not sure of the cost, but hinges aren’t cheap, and I definitely recommend using a carpenter to do the work. Hinges can be maddening!
Fantastic, right? Now, think about how much busier the cabinets would look if they still had the exposed hinges. Granted, with polished chrome hardware, it would minimize the hinge effect, but suppose you like oil rubbed bronze hardware? Exposed hinges of that variety would really stand out against the clean white cabinets. Having hidden hinges gives you the freedom to change hardware on a whim.
Apparently I would use MP(?) kind of boards (I forget what the man at HD called it) and it costs about $25 for an 8x4 sheet. I would just measure my cupboard doors, then go in and tell them the measurements, and they would do all the cutting. Then I would just prime the boards, then paint them, then pre-drill the holes for the new hinges, then put them up.
Thanks so much. Isn’t it crazy how expensive hardware can be. Concealed hinges generally have the advantage of more adjustability. That is more important with inset doors and overlay doors that meet in the center of the cabinet with no center style. If you have a simple 1/2″ overlay and a center style, they are so forgiving and don’t require precise fiddle factor installation! LOL There’s no need for the more expensive hinges.
Here are the three different kinds of kitchen cabinet doors that demonstrate the different overlays and hinge options. The first is similar to what I’m working on now – a framed cabinet with an overlay on the cabinet frame. The second is a framed cabinet where the doors are inset, flush with the cabinet frame. And the third is a frameless cabinet where hidden hinges are utilized.
When choosing a backsplash color scheme, keep in mind the type of look you want for your kitchen. By choosing a backsplash color that blends in with your wall color, you’ll be creating a streamlined, coordinated look. If you want to make a statement and have your backsplash pop, try choosing one or even a few colors that accent your wall color, making it stand out from the background.
Contemporary kitchens have sleek lines, very little ornamentation and minimalistic colors. So, for a contemporary style kitchen, it is wise to choose hardware that is simple and streamlined. Linear bar handles with straight lines or curved barrel handles are the perfect choice. Since stainless steel appliances are a hallmark of a contemporary kitchen, you can also select handles for your cabinetry in a similar style and finish as your appliance handles.
We were delighted with the professional quality of Meridian’s services. Your team was always responsive and courteous and went out of their way to ensure that our needs were met. Meridian worked closely with our architect to anticipate issues and deal with them in a timely manner. Our home was built in record time and we are very happy with the quality of workmanship.
First, you’ll want to do a thorough count of all your doors and drawers to make sure you know exactly how many new pulls and knobs you’ll need. To streamline the project, match your new hardware’s spread to the distance between the existing screw holes (you may need a tape measure). Or you can just take one of the old pulls with you to the store to shop.
Aesthetically when do you choose to a long handle or a cabinet door vs. a button size knob. This does require some finesse and doing some drawings to get it just right, but here are few tips to take into consideration. You may want to lean more towards small knobs and handles if you are going for a more contemporary style in your kitchen space. Often mixing and matching round knobs with drawer pulls work well in these style of kitchens. A longer handle may be used in a more modern kitchen for a more polished look in a space, while having too many small knobs would feel cluttered for this type of kitchen. In a transitional space, you may want to select one style of hardware and then make that one particular style of hardware larger or smaller depending on where it’s going in the kitchen. For example you would have larger handles for your refrigerator and pantry doors, but a smaller version of the same knob for the upper cabinets in your kitchen area above the refrigerator.