Whereas crystal is made primarily of silica and lead oxide, glass is largely composed of silica and soda lime. The lime is the reason glass can have a greenish tint when light is shining through it, whereas crystal is clear. Glass can provide the perfect accent to a room, and is an excellent secret weapon if you are wondering how to add a “pop” without overdoing it.
One popular subset of modern drawer cabinet pulls are cup pulls, sometimes also known as half-moon pulls because of their half-circle form. Rather than wrap your fingers around a bar, as is the case with most pulls, users slip their fingers in the underside of a cup handle, pulling towards themselves. A similar but even more modern version of this is the finger pull, where a U-shaped pull gets installed to the inside edge of a drawer, leaving an L-shaped pull that your fingers slide under. These two types of modern cabinet pulls are installed using a specific mounting method, and they can only be installed in one direction, facing down.
You know I have read so many blogs, articles, and posts about this. I have even emailed some hardware companies like Rockler. I have a hinge that I can’t figure them out, I wanted to upgrade them to something more readily available as 5/8 partial inset hinges are hard to find. Rockler suggested replacing the cabinet doors. I spent over seven months working on redoing my kitchen cabinets.
Cup pulls are a nice complement to Shaker-style cabinets, particularly in a country-style kitchen. Recessed hardware can make for a particularly elegant and modern look, but also tends to be a bit on the pricey side. Slim, modern finger pull type hardware, which mounts to the top of a drawer or the edge of a cabinet, is a nice choice for flat-front cabinets in a modern kitchen.
Sandra, thank you so much for this awesome post! I’m remodeling my 40 yr old kitchen, and wanted to get rid of the visible old fashioned hinges that show! I had absolutely no clue as to what type of cabinets I have until I read your post! I completely understand now, and will be purchasing the “concealed surface mount overlay hinges for face frame cabinets” I know the 3 holes on the outside will be visible when I change out the hinges, so I’ll just fill them in with wood filler and sand before repainting. You’re so smart, informative and detail oriented just like me! Thank you again so much for this wonderful lesson on cabinets and hinges! I’m subscribing to your website or blog or whatever you have!
Now comes the fun part, place the point of the forstner bit in the center hole you marked earlier and start drilling, drill the holes ½” deep, that’s the thickness of the bit. The instructions on the back of the kit say “do not drill completely through the door,” Ummm, OK… You’ll want to do this twice on every door, 36” or 42” doors may need 3 hinges each. Let’s backtrack a little here, when you remove the doors mark them and the cabinet box so you’ll know where they go back. Now, do that over and over and over again until all your doors are finished.

When choosing your new cabinet color, the options are limitless! White is a popular choice for cabinet colors because it goes with just about everything and will lighten up your kitchen. If the idea of having a kitchen that stands out is your thing, however, then pastels like sage green and light robin’s egg blue will give your kitchen a rustic feel with a subtle pop of color. Additionally, modern colors like bright red and deep gray are bold choices that will certainly have your kitchen making a statement in your home.
Hinges creak, wear out, discolor or even break over the years. They can also bend. This makes cabinet doors fit poorly. New hinges can update any set of cabinet doors no matter how old they are, and real estate agents often recommend replacing old hardware to help sell your home. Whether you're moving, doing a remodeling job or your kitchen just needs a bit of TLC, you can change your hinges out in one afternoon. Hinges are designed to fit square on the side of the door, making it simple to get the hinge alignment correct -- even if your doors are older than you are.
Although kitchen cabinet knobs are small objects, keep in mind that one on each cupboard door creates an overall design impact. Further impact can be created by choosing cabinet knobs that contrast in color and texture with the cabinets. If less impact is desired, cabinet knobs may be made of the same material and in the same color as the kitchen cabinets. The most important thing to remember when choosing cabinet knobs to coordinate with cabinets is to keep the kitchen’s overall tone in mind, whether it’s country, elegant, whimsical or traditional.
If the idea of metal tarnishing is not your cup of tea, a dose of chromium may be just what the doctor ordered. Stainless steel is steel infused with around 10.5 percent chromium, which keeps it from tarnishing and keeps it low-maintenance. It is also a self-healing metal, meaning if it is scratched, the chromium content will quickly restore a protective oxidizing layer over the blemish.
Painting cabinets yourself is cost-effective -- a few gallons of paint, sandpaper, cleaner -- but the process is time-intensive. You can paint most cabinet surfaces, but proper prep is key to success. For laminate and melamine finishes, be sure to rough up the surface with 150-grit sandpaper, and apply a good bonding primer before topping it off with the color of your choice.

Thanks for stopping by Lovely Etc! While every effort has been made to ensure the accuracy and effectiveness of the information displayed on this website, Lovely Etc. makes no guarantees as to the procedures and information contained here. The publisher will not be liable for direct, indirect, incidental, or consequential damages in connection with the information displayed on lovelyetc.com. This website is not intended to substitute for advice from a professional. I work hard to be honest and upfront in all of my posts here at Lovely Etc., including sponsored content. Lovely Etc is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. You can read my full disclosure policy here.

Another type of door hardware for opening cabinets are pulls or handles, which are attached to cabinet door fronts with two or more screws. You may have had experiences where you were trying to swap out old cabinet pulls for new ones, say, for example modern glass cabinet hardware, only to realize that the pulls had two screws that were a different distance apart from the new ones that you purchased. Don’t worry—you’re not alone! This happens often because the distance between two screws varies depending on pull type, manufacturer, and other factors.


You know I have read so many blogs, articles, and posts about this. I have even emailed some hardware companies like Rockler. I have a hinge that I can’t figure them out, I wanted to upgrade them to something more readily available as 5/8 partial inset hinges are hard to find. Rockler suggested replacing the cabinet doors. I spent over seven months working on redoing my kitchen cabinets.
Hi, Randi! I love all your comments. They are MAKING my day! (Especially how can I be old enough to have a daughter with her own place lol This daughter also has two kids which makes me grandma. Oy. Yes, I’m THAT old!) Anyway, I’m so glad you commented and shared about your kitchen. I’m so glad you’re going for what you want! Sometimes we do indeed get paralyzed but we have to remember who our homes are for…..and that’s US! I think we want to enjoy our kitchen especially, since most of us spend time in there with our families, or at least cooking for our families!
One popular subset of modern drawer cabinet pulls are cup pulls, sometimes also known as half-moon pulls because of their half-circle form. Rather than wrap your fingers around a bar, as is the case with most pulls, users slip their fingers in the underside of a cup handle, pulling towards themselves. A similar but even more modern version of this is the finger pull, where a U-shaped pull gets installed to the inside edge of a drawer, leaving an L-shaped pull that your fingers slide under. These two types of modern cabinet pulls are installed using a specific mounting method, and they can only be installed in one direction, facing down.
Your kitchen is looking beautiful. White paint is a miracle worker…so are you. I have an old 1970’s GE oven that looks just like yours. It’s a great oven and still works perfectly. I had the door, which was originally light brown, re-enameled years ago when I painted my kitchen white. It’s held up beautifully. I just wish I had two ovens like yours. Sure would come in handy for holiday cooking.

Budget is, of course, a key factor in any part of your kitchen remodeling decisions. While you’ll want to pay as little as possible right now, remember that quality matters in the long run. Your local kitchen cabinet showrooms will offer you the largest variety, with people who can help you choose high-quality hardware within your budget. Remember that the price is based on the finish, as well as the design and size. Knobs are less expensive than pulls.
“We find it refreshing for people to purchase what they like and what feels good to them, not caring what the ‘Joneses’ have,” says Renee. The Brandino Brass team regularly works with professionals who have their own signature styles. “One architect in town may use the same small knob all over the house all in the same finish for continuity. Another one will use different styles and finishes in each individual room,” says Jessie Isom, Brandino Brass team member. “There is no right or wrong if you like it.”
Now comes the fun part, place the point of the forstner bit in the center hole you marked earlier and start drilling, drill the holes ½” deep, that’s the thickness of the bit. The instructions on the back of the kit say “do not drill completely through the door,” Ummm, OK… You’ll want to do this twice on every door, 36” or 42” doors may need 3 hinges each. Let’s backtrack a little here, when you remove the doors mark them and the cabinet box so you’ll know where they go back. Now, do that over and over and over again until all your doors are finished.

What is the existing decor of your kitchen or bathroom? For instance, if your kitchen has a white, Scandinavian minimalist aesthetic, you should try matching your hardware with it — in that case, perhaps something slender, jet-black and low-profile. Mismatching styles can look “off” and can create a confused sense of the room’s personality. However, it can also be done well. We’ll go into more depth on this below.

After narrowing down your kitchen cabinets options and finally selecting the style that looks the best for your home, you still have to decide on the right decorative hardware for your cabinets. Choosing kitchen cabinet hardware sounds like an easy process, but with the thousands upon thousands of options available, making your final decision can be a bit overwhelming.
Ultimately, you should choose your hardware according to your personal preferences, kitchen style and goals for functionality. If you’re concerned about resale value, recognize that the most popular hardware finishes are satin, nickel and bronze. There are no hard-set rules to follow when it comes to adding the final details to your kitchen, and many people choose a combination of knobs and pulls. If you’re unsure of which to choose for your kitchen cabinets or drawers, it’s wise to examine the pros and cons of both.
Consult with a contractor or a knowledgeable salesperson about which hinges will work with your doors. If your doors are flush with the cabinets, butt hinges can be used. They are lower in price than others but do not self-close. European hinges are installed on full overlay, frameless or inset doors. They are widely used because of their ease of installation and ability to be adjusted once in place. These hinges self-close. Partial wraparound hardware will support larger doors, but it does not self-close. Several other types hinges are available. The construction of your door, ease of installation and price will need to be considered. .

And why shouldn’t we love them? Not only are they sturdy and virtually maintenance-free, but each stone tells a story that is uniquely independent of humankind. That stone making up your cabinet knob was formed in the hot belly of our planet, hardened to a crust on its exterior and then one day miraculously plucked up by a passing human and turned into a part of your daily life.

Cabinet hardware is composed a variety of materials -- most of which are metal alloys. Brass hardware typically has a lacquer or plating applied to its surface that makes it very durable in a kitchen. It is antimicrobial and helps to reduce the spread of germs. Bronze hardware is also antimicrobial, offers a substantial look and feel, and works well for cabinets made of thicker woods. Stainless steel is another option because it is so durable. Pewter and nickel are popular choices, too. Or, you can choose knobs made from glass or crystal for a vintage look. 


Hopefully you drilled for the hinges in the same location on every door, if so, then this should be simple. You really just need to measure for the top hinge. I installed my top hinge 4” down from the top of the door, so I measured 3 ½” down from the inside top of the face frame (3 ½” + ½” overlay = 4”). This step is a team effort, one person to hold the door and another person to attach the hinge to the face frame.

Sandra, I’m so glad that I came across your blog! You’ve given so much great information that I can use every day in my job doing kitchen cabinet sales. And then there’s the whole DIY part for me personally! I’m really hoping that you can answer my question, though. I have a customer who is refacing her cabinets. She has frameless cabinets and used to have exposed hinges. She wanted concealed hinges so we had the hinge holes drilled 1″ (center) from the edge. She has her new doors but when she hangs them, there’s a 1/4″ gap between the door and center stile, even after adjusting them. We were using full overlay hinges. Can you advise which type of overlay hinge to use and how to rectify the gap? Thanks so much!

The other option for changing kitchen cabinet knobs is to purchase new ones. The two main types of cabinet fixtures for kitchens are circular pulls and metal bars. The round pulls tend to be old-fashioned, while the metal bar handles are often more contemporary. Cabinet pulls can be made more modern by painting them metallic silver. Metal bar cabinet door handles are usually silver-colored and narrow; this style is often seen with darker wood toned cabinets.
At one point I considered trying to update the cabinets with more modern hidden hinges, but after some research I realized that isn’t possible for all cabinet styles and can also be pretty costly.  So instead, I started making a plan to update the older-style hinges we already had.  They started out an aged brass finish.  And not a beautiful antique brass, but more like brass that had been soaking up kitchen grease for 40 years.  Not exactly what I wanted to use on my ‘new’ white cabinets.

When it comes to finishes, let the rest of the components in the home be your guide. If you are selecting an oil-rubbed bronze artisan faucet, select the matching hardware. Interested in mixing finishes? In today’s home, anything goes. Mixing brass with black iron might be over the top, but pairing brushed nickel with polished chrome can offer a dynamic and attractive contrast.


Consider the style that you have used to decorate your home. Traditional styling indicates a need to use cabinet hardware that has a brushed finish. Pewter, nickel, and polished brass blend well with traditional styling, although other styles will look nice as well. Perhaps you would prefer to contrast the traditional cabinets with some hardware that leans more toward the unique and modern.

Due to its quasi-metallic makeup, crystal does much more than just sparkle — it also exhibits other coveted traits. When rubbed to the point of vibrating, crystal will produce a musical tone. It is also stronger than glass and can be blown quite thin. Cliffside Industries distributes German crystal, which is stupendous in its clarity and diamond-like cuts, as well as products from the world-famous Austrian crystal maker Swarovski AG.

The chrome and stainless steel can vary some too, but usually not as much, and as often as nickel.  To be safe, get samples from different brands and compare the colors, or get all the hardware that you need for  a single room from one manufacturer.  It’s ok if the nickel in one room doesn’t exactly match the nickel in another room.  It only looks mismatched if the different nickel finishes  are right next to each other in the same room.
Dreamy DIY: Have you ever seen something that makes you want to break out the craft kit and get to down to business? Well these leather drawer pulls with brass rivets are so luxuriously handsome it makes us want to rip out and redo every single pull in the house. I can only imagine how delightful these will begin to look when worn with use — a little imperfection to balance and roughen up such a posh space.
×