Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.
My Shed Plans is the perfect package for those who do not have an ounce of knowledge regarding shed building. You will benefit from the step-by-step directions, colored illustrations, section details and the woodworking course. All techniques and tricks will be taught to you, so you’ll definitely learn a lot about building your own sheds. If you do have some natural creative ability and some skill, the sheds should turn out fine.
There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.

Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
I have 3D shed models for all most all of these shed plans.  Use these models to walk inside or around your shed while you are building to see all the details in virtual reality to make your shed building project easier.  You can even use your smartphone, laptop, virtual reality goggles with the augmented reality feature to see what your shed will look like in your back yard.
It’s not always possible, but if you’re using 4 x 8-ft. sheet siding and have enough helpers around to lift the wall when you’re done, you can save time by siding the walls before you raise them. Make sure to straighten the wall plates and square the wall by measuring diagonally before you nail on the siding. This is easier to do on a wood shed floor because you can tack the plates to the floor to hold the wall straight and square while you install the siding.

There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
It’s unconventional, but building the roof upside down on the platform has advantages. First, you avoid a lot of ladder work. And second, you can nail the soffit material to the overhangs easily without having to work overhead and in cramped spaces. You do have to take a little extra care to make sure the framing is square and the perimeter 2x4s are perfectly straight before nailing on the soffit, though. Start by cutting out the rafters using the pattern in Figure D as a guide.
Before you start building your shed, there are a few things you might want to clear out first. For instance, does your town require you to obtain a building permit? Where do you want to build the shed? Is building a shed allowed on your property? Listing down the equipment, furniture, fixtures and goods to be stored in the shed, as this will determine what type of shed you need. What should be the size of the shed? There are practically lots of areas that you need work on before starting with the building phase. The following breakdown will help you get through this phase:
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals. 

A 1964-built Eichler home was bought in original condition with vintage appliances, fixtures, and finishes. The new owners wanted to retain its iconic midcentury modern design but requested that Gast Architects make some updates to create a calm, light-filled, and inviting home. Gast strived to preserve the signature finishes of the house while creating a larger, more modern kitchen, opening up the floor plan, and updating the master suite. The shed in the backyard repeats the lines of the main house, resembling a mini Eichler.
Any person interested in the field of woodworking will tell you how much time and effort it goes into building a wood project. And even after putting in so much effort, the chances of mistakes and failures are pretty high. So much so, that after a time you will feel like giving up altogether. Most people spend a lot of time and money on their first shed project and often end up frustrated because what they finally create is nothing like they wanted to. Why? The measurements were all screwed up! If that sounds like your story, it is finally going to change.  With Ryan’s collection of shed plans in your arsenal, you will never ever have to look for shed plans anywhere else.
You will find that the shed blueprints are mostly just that. These are not step-by-step instructional material like you might think. Instead, they are merely design drawings. They include a variety of views, (plan, elevation, perspective), and a description. Sometimes you’ll get a materials list. And while there are admittedly a few that give full instructions, most of them are just shed designs and plans. But because they’re from different sources, some of them are the wrong way round.
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.
Pasadena, California, is known for its Craftsman style homes, a great number of which have been carefully preserved and restored. Owned by a University of Southern California (USC)-educated architect, Nott & Associates specializes in the Craftsman style. For a backyard shed, Nott custom designed and constructed the wooden doors, which include period-perfect details and hardware.

Run! Do not walk away from this product! Total scam! The Ryan Shed Plans product promises 12,000 different do it yourself shed building plans. Instead what you get is a whole bunch of disconnected sketches, drawings, And partial blueprints that he has photo copied from hundreds of unrelated sources. I personally have several years of carpentry, homebuilding, and woodworking experience So I assumed that even if these so-called “shed building plans” we’re light on specific details I’d still be able to use them. WRONG! You will find that 99% of the“Plans“ are completely useless for the purpose of building a backyard shed. After an hour of grinding through the files included in that on my download, I did happen upon a singly reasonably complete building plan for a modest shed which included detail dimensions, material list, and the sorts of things needed to actually build a shed. Doing a little more research, I later found where this particular we’ll Drawn to plan had been ripped off from another legitimate Shed building website. Shame on you RyanShedPlans for marketing such a terrible, useless product. Judging from your online sales pitch you are clearly a gifted marketer. If you spent as much time developing a database of legitimate, usable shed plans as you did putting together your totally fraudulent marketing material, you would have an incredible product worth much much more then you’re charging. But I guess you I already know that.

The ad shows the bright shiny new 8x12 Gabled Shed. However, after purchase, that plan does not show up anywhere. I have emailed and requested that plan several times but no response. So, thanks to those who have already posted the 1-800-390-6035 number for ClickBank customer support. It's a chore to work with their VRU but with patience, you can get a refund.


Then, you will need to install a series of floor joists across the entire length of the support beams; these will need to be the same length as the distance between the two rim joints so that they’ll fit between them. In the example design, the floor joists are all separated by 14.5-inch gaps except for the outermost two, which are 13 3⁄4 inches (34.9 cm) from their immediate neighbors; this is to allow a standard piece of plywood to line up with the outermost edge of the outermost joist but only cover half of an interior joist, allowing its neighbor to cover the other half so that both can be supported properly.[3]
Build rafters across the roof and separate them with blocking. These should overhang the walls of your shed for increased weather protection. Again, your measurements will be greatly simplified if you space the rafters the same way that you spaced your floor joists. When you’re done, attach pieces of blocking between each pair of rafters along the top plates.[10]
Hello Instructables!  This is my entry into the Shopbot Contest.  This Instructable will show you the steps to building your own shed.   We decided that our shed would be for storage because we wanted to get some stuff out of the garage so we can use it as a shop.  One of the challenges of building a shed in our backyard was that the ground was sloped in the area that we wanted to put it, so we had to find a way to get around that.  Another was that we are building beside some well established trees, and we didn't want to harm their root structure.  This is why we went with cinderblock and mortar rather than poured concrete.
· Gambrel styled shed — it is a very common type of shed. Its roof is highly steep and is four sided. This type of shed at some point resembles a hexagon. This type of shed is preferred as the shape of its roof makes the interior of the shed to be spacious hence creating more space where a lot of garden and outdoor tools can be stored. In this type of shed, one may have a workshop in the shed. They can even accommodate a car due to their large spaces.
Build rafters across the roof and separate them with blocking. These should overhang the walls of your shed for increased weather protection. Again, your measurements will be greatly simplified if you space the rafters the same way that you spaced your floor joists. When you’re done, attach pieces of blocking between each pair of rafters along the top plates.[10]
Modern Sheds are defined by their clean and simple looks. They are perfect to be used as a home office, work studio or even a cool place to store things. With lots of windows, a simple low slope metal roof and horizontal siding, these plans are a great way to build a professional work space right in your back yard. Building a home office or work studio in your backyard will eliminate the commute to work and at the same time give you a quiet professional place to work and bring clients.
If you don’t plan to have electricity running through your shed, this is the shed building tip you will want to listen to most. Windows easily brighten up a shed so you don’t have to hunt around for a flashlight or a lantern if you’re old school, every time you need to grab something from your shed. But…don’t go nuts and install a ton of windows or you will be giving up valuable space to hang tools or shelves.

Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
Wooden sheds have a characteristic look that can mix in well with the environment In spite of the quality of wood, after some time, untreated and ignored wood can decay, split, twist or wind up noticeably powerless to form and mould, so wood sheds ought to be dealt with for insurance with stain and varnish. Wood sheds require regular support. This incorporates keeping plant matter, flotsam and jetsam from heaping up adjacent to the dividers and on the rooftop, and infrequent decay sealing with the additive.
Build your own shed and you'll instantly have increased space for your tools, a place to work on DIY projects and a way to keep your garage free of clutter. There are many shed plans online that show you how to build your own shed from scratch using wood. It may be easier, however, to use a kit to create a resin, metal or plastic shed instead. A storage shed kit contains all the materials you need including trim. This Home Depot project uses the Keter Stronghold Resin Shed Kit to show you how to build a shed from a kit. We also offer a large variety of other types of shed designs to choose from. Like most, this DIY shed requires tools like a power drill and step ladder to put it together, but assembly instructions will vary by kit. Make sure to follow the manufacturer's instructions carefully.
Once you decide that adding a shed will increase the enjoyment of your outdoor space, it’s time to ask pertinent questions to assess your needs. Consider exactly how you want to use your shed, what design will best suit those tasks, and how much your budget will allow. Learn what features are most popular, and why. Also research what’s really involved with building a shed yourself, as opposed to hiring a pro to do the job, and be sure you understand such important factors as warranty and delivery.
A lean to shed is the perfect way to build up against a fence or wall and still have plenty of room in your yard. It also keeps water away from the structure you are building up against. The lean to shed design is the simplest design of shed to build because of its single plane sloping roof which makes the roof easy to build. We have many different configurations and sizes either with double or single doors. The larger lean to designs include optional plans to build the doors on any side of the shed. Our smaller lean to style sheds have a 4 in 12 pitch roof and our larger designs have a 2 in 12 pitch roof to keep the overall shed height lower and help reduce shed construction costs.
Don’t let another dictate your choices. With our FREE and PREMIUM plans, all you need to is select the dimension you want, download the plan and start right away. We have more than 40 FREE shed plans available to download. Various dimensions, shapes and sizes available. If FREE PLANS are not good enough for you and you want more details, please consider our PREMIUM PLANS. These plans not only give you the entire shed’s dimensions but also dimensions of the foundation, walls, doors, windows and the like, but much more! Everything is laid out in plain words. Determine the size of shed you want to go for, download our guides and start building your very first shed right away.
My Shed Plans just might be every do-it-yourself junkie’s dream product. Ryan Henderson, the creator of My Shed Plans, has been building one-of-a-kind outdoor sheds for more than 20 years. If you believe his story, he has unselfishly decided to share his love of woodworking and carpentry through his guides which will enable the everyman who does not have handyman experience to build their very own outdoor shed. Can it be true?
Once you’ve received the package and all it entails, you can begin creating your own outdoor shed whenever you feel ready. The only time you need to exert the effort is when you’ve begun construction. When you do decide to start, make sure that you have a decent amount of time as well as motivation to carry through the whole project. You don’t want to be left with an unfinished shed out in the yard, a constant reminder that you tried and failed.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
Because most DIY manuals and plans are written by ghostwriters who don’t know anything about carpentry, it is common to find incomplete guides. This package is different. Ryan has spent time and effort ensuring that his expertise is laid out in a way that anyone can follow. After all, he is an educator. You also save because the plans make sure you don’t waste material. 
×