I don't waste my time on free plans, store-bought sheds, or ready-made, mail order kit solutions... been there, done that. Free means lack of user feedback and you get absolutely no customer support. With store-bought and ready-made mail order sheds: they're flimsy, profit-driven solutions that I've always had to tear apart and modify too much to get the storage space to work or to match the character and style of the home.
We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
We have a large selection of small horse barn plans, tack rooms and run in shed plans. Each of our designs comes with a materials list and construction plans to help you save time and money when you build. We have many different sizes of horse barns including one, two, three and four stalls. Most of the barns and run in sheds are designed to be built with pine board and batten siding on the outside and a 4' tall Oak kick board on the interior.
We provide outdoor shed plans that are affordable and easy to build from. Our storage shed plans are organized so that you can buy shed plans and build your own shed no matter what your skill level. There are helpful how to build instructions and tips that go along with each stage of the storage building process from the foundation, floor, walls to the roof. Building your own shed saves you money and is a very rewarding experience that adds value to your property. Click the shed images above to view our library of over 200 storage shed plans.
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.
There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.
Our free shed plans offer a solid introduction to shed construction and building technique, and they include a full materials list to help get you started. The instructions provided are basic, but if you have existing experience with construction, then they may well suffice to help you build your shed without having to spend money. Our premium shed plans are on another level, however. They include detailed, step-by-step instructions and they walk you through the entire shed building process. We also include professional-grade tips on select pages to help you as best we can – it’s like having an expert right next to you every step of the way. All the techniques you will learn from reading our premium shed plans are transferrable too, and they can help even the most seasoned builders perfect their skills. Therefore, we recommend premium shed plans to anybody who is serious about building their own shed, with our free shed plans best-suited as a taster for those interested. Hopefully, you’ve now understood that here at 3DSHEDPLANS™ we do not promote or employ any marketing gimmicks. Download our FREE shed plans and see it for yourself. Don't forget to SUBSCRIBE to our newsletter to get special deals, offers and discounts!
Firewood sheds are simple sheds designed to help your firewood dry out and also keep it from getting a lot of water on the wood when it rains or snows. The simple open front design allows the wood to be easily accessible and increases air flow around the stacked wood. The floors are designed using 2x4 boards spaced 1" apart to provide plenty of strength and allow allow air to circulate up through the floor and around the wood to season it properly. The roofs are corrugated metal but they can also be roofed with asphalt shingles.
Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
· Firewood storage sheds — mainly used to store firewood from elements of weather such as rainfall that may destroy them. The most common type of firewood shed is the lean on shed. It is also the most suitable as it allows free circulation of air, therefore, preventing dampness of the firewood. It is also near the house so the firewood is stored near your house and may access anytime you need them.
If you're excited to start browsing Ryan's shed designs, you're right where I was shortly after finding Ryan Shed Plans. If you can dedicate some time to putting your own shed together and don't mind purchasing the materials from a local store or ordering them online as needed, you will appreciate the thorough instructions provided with each of Ryan's plans. There are so many options that you should have no problem finding a design that fits your needs, and you will have tons of inspiration to fuel future projects as well.

Are you one of those people who love woodworking and seek joy out of it? If yes, well you might already know that every woodworking project requires a certain amount of time and effort to be invested in it. In some cases, it’s almost the same as the construction projects, and many people say that building a wooden shed is synonymous to building a brick wall. Even when it’s easy and simple, you should have adequate knowledge to successfully implement the design plan.

The trick for learning how to build a storage shed is to stretch the line across a scrap of wood at each end so there’s a space between the line and the part you’re straightening. On a wall, for example, tack small scraps of 1/2-in. plywood at each end of the top plate and stretch a line very tightly over the plywood. Then use a third scrap as a gauge to check the distance between the line and the lumber. Use braces or whatever is needed to adjust the top plate until the gauge just fits. Now your top plate will be perfectly straight.
We found all the materials to build this shed at our local home center. Most of the construction is straightforward and requires only standard carpentry tools and a circular saw. For how to build the shed windows and door, you’ll also need a table saw, power miter saw and router. We used a Kreg pocket hole jig and pocket hole screws to assemble the door and windows. Another really great thing about small storage sheds such as this on, it don’t take as long to build! With a helper or two, you could have the platform and shell built in two or three days. Then expect to spend four or five more days completing the siding, trim, doors, windows and roofing.
However, these problems made me realise one thing that it is important to have a collection of woodworking plans be it sheds, benches, chairs or anything to avoid such hassles. This is where the Ryan’s Shed Plans come into the picture. Are you one of those people who wants to build a shed but has no resources or ideas where you can find reliable designs? Well, you have to come to the right place. The Ryan Shed Plans contain a whole of 12,000 Woodworking Designs and Plans, and this article will tell you what it contains and whether they are worth to buy or not!​
Ø Large sheds — they are larger in size compared to the other type of sheds we have mentioned above. They have enough space that one can accommodate outdoor tools and still carry out activities. They can be used as offices. However, if used as an office, one will have to be careful while carrying out their activities to avoid substances that may hurt or prick them as they are moving around.
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.

Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.
We have a large selection of small horse barn plans, tack rooms and run in shed plans. Each of our designs comes with a materials list and construction plans to help you save time and money when you build. We have many different sizes of horse barns including one, two, three and four stalls. Most of the barns and run in sheds are designed to be built with pine board and batten siding on the outside and a 4' tall Oak kick board on the interior.

Build the framework for the back wall. Make the top and bottom beams (a.k.a. the plates) the same length as the length of the floor which they sit. To keep your measurements simple, make the spacing between the vertical studs identical to the spacing between your floor joists. Note that the back wall should be lower than the front wall so that the roof slopes and directs rain away from the door.[6]

The last project we want to share with you today is a greenhouse/ garden shed which we found on lizmarieblog. It’s really cute and inside you can find shelves, storage compartments and a bunch of other practical things. In addition to all that, this lovely shed even has a chandelier. It’s a decorative element and it really elevates the decor to a whole new level.
When you nail on the siding, make sure it overhangs the framing on each side by 3-1/2 in. and that you’ve trimmed off the top corner to follow the slope of the angled top plate (Photo 2). Attach the siding with 2-in. galvanized or stainless steel ring-shank siding nails placed 8 in. apart along studs and 6 in. apart along the edges of the sheets. You’ll have to nail blocking between the studs to support the top edge of the siding and the Z-flashing.
After the concrete is all ready, the sole plates are then joined together with the anchor plates which protrude out of the foundation. Use the carpenter’s pencil and measuring tape to mark about one and a half inches from the board end continually every sixteen inches till the further end. These marks guide where the studs will be placed. Mark where the anchor and the mudsill meet up with a different marker from the one used initially. The studs are then taken and galvanized nails are driven through the marked areas into the center of the board until they reach the stud bottom. The studs should be secured to the baseboard.
The plan features not only a cutting list and project diagram. There are also clear instructions starting from building the base and ending with installing the windows and doing the trims. Once you’ve built a small shed like this, you’ll have enough experience to build a bigger one that fits all the garden equipment as well. A tiny shed like this though is a necessary item for every home!

• Time underestimation — people normally underestimate the time taken to build any given structure. It is a normal occurrence when building delays, the delays may be caused by issues as inadequate tools and climatic changes that would not allow outdoor activities as the building. Building any kind of structure may take longer than expected. It is therefore important to do things at a fast rate to reduce the number of delays that one has to encounter and also reduce frustration brought about by delays. Completion of construction is also advantageous as one gets to start using the structure sooner than expected which to some extents save on your finances.
· Garden office shed — it is a type of shed which you can build when you need to find time for yourself and also to carry out your own activities. You can carry out your office activities from here since there are no distractions. They are suitable for people with large families and would like to get away from all the noise and distractions that may hinder someone from working smoothly.
When you open them on the computer, you have to fill them up and make them organized as the PDFs and Ebooks are either in not very compatible format like you have to rotate them the right way every single time. The product is not exactly disappointing on a whole, but with so many blueprints it is tough to find which one is good and which one is not as you have to go through all of them to decide that.​
Can I tell you a secret? I don’t think I would ever do this again because I have another secret. Shhh, don’t tell, but DIY projects that are a joint effort between my hubby and myself really aren’t fun. They are stressful, and hard and take a toll on us. Which may seem strange in a way because we are both handy and we both enjoy these type of projects and we even have a pretty good idea as to what we are doing. Actually, I think we really have it together – separately! Once you throw the two of us together is gets a little intense. Enough about that, let’s get on to the project.
We provide outdoor shed plans that are affordable and easy to build from. Our storage shed plans are organized so that you can buy shed plans and build your own shed no matter what your skill level. There are helpful how to build instructions and tips that go along with each stage of the storage building process from the foundation, floor, walls to the roof. Building your own shed saves you money and is a very rewarding experience that adds value to your property. Click the shed images above to view our library of over 200 storage shed plans.
When you use the information given in this program to build wooden sheds rather than focus on expensive materials, you will be able to save a huge amount of money. Everything in this program has been explained in an easy to understand method. When you purchase this program, it is important to find a reputed retailer. You need to find someone who sells only authentic products at reasonable prices.
Because most DIY manuals and plans are written by ghostwriters who don’t know anything about carpentry, it is common to find incomplete guides. This package is different. Ryan has spent time and effort ensuring that his expertise is laid out in a way that anyone can follow. After all, he is an educator. You also save because the plans make sure you don’t waste material.

There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.

You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
Made from durable blow molded resin, this Alpine shed from Suncast comes complete with 14 windows with delightful contrast trim. The double doors are built with articulating metal hardware so they’re robust and durable. The floor is reinforced for the ultimate sturdy foundation. Extra roof support is provided by the metal trusses and ridge beaming. This shed is perfect when you’re looking for something that is built tough, and stands out beyond the more flimsy and cheap designs that you find on the market. It is large enough to stow everything that you need and keep all items clean, safe, and secure. The outer appearance of this shed makes it perfect for those who want an attractive external design that doesn’t stick out like a sore thumb in your yard. All in all, customer reviews across the board are quite positive for this shed, and it makes a great addition to anyone’s home.

We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
If you are looking for the best collection of outdoor shed plans, then look no further. ‘My Shed Plans’ by Ryan Henderson’ is perhaps among the best collection of shed plans you can find anywhere today. It is a collection of around 12,000 woodworking plans which are designed to cater to the needs of both professional and amateur woodworkers. With over 20 years of experience in shed building, Ryan is an authority in the field. His plans are explained well with step by step instructions. If you follow his shed plans and instructions properly, you will be able to build one with ease. It doesn’t matter if your woodworking skills are basic or if you have failed in making a shed before, by following his shed plans you can undertake any such project with confidence.

By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.

Then, you will need to install a series of floor joists across the entire length of the support beams; these will need to be the same length as the distance between the two rim joints so that they’ll fit between them. In the example design, the floor joists are all separated by 14.5-inch gaps except for the outermost two, which are 13 3⁄4 inches (34.9 cm) from their immediate neighbors; this is to allow a standard piece of plywood to line up with the outermost edge of the outermost joist but only cover half of an interior joist, allowing its neighbor to cover the other half so that both can be supported properly.[3]


Stand the back wall. Then align the corner of the side and back walls and nail them together. With a helper on the outside of the shed to push if necessary, line up the inside edge of the bottom plate with the chalk line and nail it to the platform. Continue around the building, standing the opposite end wall and finally the front wall. Nail the corners together, making sure that the top plates of adjoining walls are flush with each other.
I have 3D shed models for all most all of these shed plans.  Use these models to walk inside or around your shed while you are building to see all the details in virtual reality to make your shed building project easier.  You can even use your smartphone, laptop, virtual reality goggles with the augmented reality feature to see what your shed will look like in your back yard.

For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.
There are over 12,000 different shed plans and woodworking endeavours for you to choose from, so the projects are pretty much endless. You are given everything you could possibly need to build your own beautiful outdoor shed. For those who already have years of woodwork and carpentry experience, My Shed Plans may not offer you enough information that you don’t already know. The only benefits you’ll get from the package are the innovative shed blueprints and designs, which can be help enough.
×