Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.
Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.
• Improper geographical placement — this is one of the huge mistakes one may make while shed building. It may be too close to your house hence obstructing your beautiful view from your living room or your kitchen as you are cooking. The last thing one would want is not like your house because of a simple thing as a view, so be careful with where you place your shed. One may also build the shed too far away from their house which again is an inconvenience. Who would want to walk from your house to your shed to get some tool you need and you have to trek some long distance? You may also need your shed someplace you can see due to the security reasons. You would want some stupid thief taking your stuff without you see them, would you? Or walking down a snowy lane during a chilly night just so you could get something from your shed. Before building your shed consider all the factors whether positive or negative and then come up with the place in your compound with the most advantages compared to disadvantages.
Ryan Henderson seems pretty straightforward and confident about his product. There are no outrageous claims that have been made, like building a shed in 15 minutes, and all the expectations on the website are pretty realistic. You won’t feel the need to question the product, as the website is very detailed, making it seem like they only want their consumers to be well-educated on the sheds they decide to make.
If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996.
There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.
First, a cute little shed that we found on ladygoats. It’s made of wood, like most sheds, and it has no windows. It’s great for storage but it’s also a nice idea for a workspace. You can turn it into a gardening shed, a place to keep all the tools and to get some things done while working in the garden. We love its simplicity and the fact that it has a playful character and a pretty chic look for a shed. It’s all in the details. In this case, it’s the roof and the hardware that make all the difference.

Ditto. It's a scam because, like many other Internet scams of this nature, they have used bogus "review" sites they created themselves (I checked with ICANN) to falsely pump up their value. They charge your credit card immediately, without allowing you to review your purchase, and most importantly, they have ripped off a lot of the "product" from either free sites, such as universities, or even commercial sites that surely don't realize that their product is being used this way. They also have false promises, such as that all the plans will have instructions,etc. Not so, It's just a crazy compliation of junk they scoured off the Internet, repackaged in what seems like about a half hour. Totally bogus.
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.

Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.[5]


Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.
There are over 12,000 different shed plans and woodworking endeavours for you to choose from, so the projects are pretty much endless. You are given everything you could possibly need to build your own beautiful outdoor shed. For those who already have years of woodwork and carpentry experience, My Shed Plans may not offer you enough information that you don’t already know. The only benefits you’ll get from the package are the innovative shed blueprints and designs, which can be help enough.
The female version of man caves is she sheds: havens to escape that can be designed and decorated in whatever style the owner desires. Inspired by a tiny hummingbird viewed nearby, this shed is aptly named Hummingbird Cottage. Lovely photos on Instagram reveal that the shed is used for art projects, as a retreat, displaying vintage pottery, and for entertaining friends. Extras like a hanging faux-crystal chandelier, potted flowering plants, wreaths, and stained glass give it a personal touch.
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.
Make a template on the shed floor for assembling the trusses. Begin by laying out the parts for one truss. Align the bottom chord with the edge of the plywood floor. Then cut four 24-in.-long 2 x 4s. Lay two alongside each rafter and screw them to the plywood floor. Now use these short boards as stopblocks for laying out and assembling each truss. Fasten plywood gussets to each side of every truss with carpenter's glue and 1-in. roofing nails and set the trusses aside.
For a freestanding shed, you can build the shed on top of a concrete slab (see Pouring a Concrete Slab) instead of the pressure-treated skids and floor joists; this will actually result in a sturdier—more permanent— structure. Otherwise, for a freestanding shed, the foundation should be constructed on concrete piers or poured footings (see Pouring Concrete Footings & Piers).  Be aware that building on footings will raise the height of the shed up from the ground.
Stand the back wall. Then align the corner of the side and back walls and nail them together. With a helper on the outside of the shed to push if necessary, line up the inside edge of the bottom plate with the chalk line and nail it to the platform. Continue around the building, standing the opposite end wall and finally the front wall. Nail the corners together, making sure that the top plates of adjoining walls are flush with each other.
A backyard shed frees up your home and garage by storing cumbersome essentials like your riding mower, hedge trimmers, and other lawn care equipment. But these sturdy little buildings can serve a host of other practical functions—and hobbies too. Think chicken coop, greenhouse, screening room—the list is limitless! For a shed to live up to its potential, however, it’s crucial to avoid common building mistakes. The dos and don’ts listed here, courtesy of the LP® Outdoor Building Solutions® pros, will help ensure that your shed meets your needs for years to come, whether you’re simply using it for storage or tricking it out as your outdoor fun zone.

Step 4 – Time to finally pour the concrete floor. This requires another trip to Home Depot. The kids are getting tired of this project and at this point, I don’t think they really care about how to build a shed, but would rather take a nap. Layla did kick butt at her morning JuJitsu tournament and won third place for her age group. If you are feeling tired like Layla and overwhelmed you can always get some help with you DIY shed project. Click here for assistance: HELP

My Shed Plans just might be every do-it-yourself junkie’s dream product. Ryan Henderson, the creator of My Shed Plans, has been building one-of-a-kind outdoor sheds for more than 20 years. If you believe his story, he has unselfishly decided to share his love of woodworking and carpentry through his guides which will enable the everyman who does not have handyman experience to build their very own outdoor shed. Can it be true?
For those who don’t quite believe in My Shed Plans, they offer a 60 day trial. If within those 60 days, you feel like the product hasn’t lived up to its hype, you may return it and receive a full refund. A decent outdoor shed can be built in a week or two depending on your schedule, and the amount of time you have to build it. Therefore, 60 days is enough for you to test out the product and see what you come up with. If you have a shed worthy of showing off to your buddies, or gal pals, then keep it. If you have a heap of materials in a pile that resembles something Homer Simpson might have created, then return it. No big deal.
Before you start building your shed, there are a few things you might want to clear out first. For instance, does your town require you to obtain a building permit? Where do you want to build the shed? Is building a shed allowed on your property? Listing down the equipment, furniture, fixtures and goods to be stored in the shed, as this will determine what type of shed you need. What should be the size of the shed? There are practically lots of areas that you need work on before starting with the building phase. The following breakdown will help you get through this phase:

Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.
For a freestanding shed, you can build the shed on top of a concrete slab (see Pouring a Concrete Slab) instead of the pressure-treated skids and floor joists; this will actually result in a sturdier—more permanent— structure. Otherwise, for a freestanding shed, the foundation should be constructed on concrete piers or poured footings (see Pouring Concrete Footings & Piers).  Be aware that building on footings will raise the height of the shed up from the ground.

· Garden office shed — it is a type of shed which you can build when you need to find time for yourself and also to carry out your own activities. You can carry out your office activities from here since there are no distractions. They are suitable for people with large families and would like to get away from all the noise and distractions that may hinder someone from working smoothly.

If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.

×