When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.

For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.
Most of the Amish Built Sheds Unlimited storage sheds can be custom ordered as a DIY STORAGE SHED KIT PACKAGE for assembly on-site. If for any reason installing a completed storage building into the backyard is not an option or if you are simply a handyman at heart and would like to try your own skills, then a Economy Shed Kit, Vinyl Sided Storage Shed Kit, Classic Amish Sheds Kit or a Premier Garden Storage Shed Kit might work perfectly for you.

A saltbox shed is defined by its double sloping roof style. The front roof has a steep slope of 12/12, and the rear roof has a lower slope of 5/12. Most plans have options for the doors on either the front or side. Click on the images to view more details. The saltbox style evolved from the practice of extending the second floor roof line down to the first floor level to create additional covered living space. The design adds a south eastern flair to back yard shed designs.
To make it easier for you, the “do-it-yourself” storage shed kits are for sale partially prefabricated to make the assembly of the shed barn kit simple and straightforward. The DIY storage shed kit walls are assembled and the rafters are prebuilt and ready to put into place. While we offer large shed kits as well as small barn kits, on the smaller 6′ and 8′ shed kits, the floor may be partially constructed to make the job even easier.

First, a cute little shed that we found on ladygoats. It’s made of wood, like most sheds, and it has no windows. It’s great for storage but it’s also a nice idea for a workspace. You can turn it into a gardening shed, a place to keep all the tools and to get some things done while working in the garden. We love its simplicity and the fact that it has a playful character and a pretty chic look for a shed. It’s all in the details. In this case, it’s the roof and the hardware that make all the difference.
We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
Our 14 by 24 one car garage was delivered and set up early November. The truck pulled up shortly before 7 am and left by 5 pm after the garage was completed and cleaned inside and out. Two carpenters worked tiredlessly without even a lunchbreak to make sure that everything was complete by the evening. Despite the workpressure the always had a kind word and did not mind to answer our stupid questions. We haven't seen such a work ethics for quite some time. On top of it, the garage looks terrific and matches the style of the house. When asked I will recommend Sheds Unlimited without any reservation - a job very well done!
Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.
These plans are for saltbox roof style sheds.  They are built with trusses that you build.  These sheds are perfect for general storage, garden sheds, tool sheds, potting sheds, playhouses and more.  This shed in my opinion, if you are wanting to build a shed for gardening, this is the one.  It has lots of charm and character with it's desirable design.
It’s unconventional, but building the roof upside down on the platform has advantages. First, you avoid a lot of ladder work. And second, you can nail the soffit material to the overhangs easily without having to work overhead and in cramped spaces. You do have to take a little extra care to make sure the framing is square and the perimeter 2x4s are perfectly straight before nailing on the soffit, though. Start by cutting out the rafters using the pattern in Figure D as a guide.

The best spot for a shed is level, well-drained ground close to where you work in your garden or yard. The location doesn’t need to be perfectly flat; the foundation design shown in the plans allows for adjustments to make the floor level. Small sheds require only a top-of-soil foundation, even in locations with freezing winter temperatures. Precast concrete deck blocks work perfectly for this.


If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
· Gambrel styled shed — it is a very common type of shed. Its roof is highly steep and is four sided. This type of shed at some point resembles a hexagon. This type of shed is preferred as the shape of its roof makes the interior of the shed to be spacious hence creating more space where a lot of garden and outdoor tools can be stored. In this type of shed, one may have a workshop in the shed. They can even accommodate a car due to their large spaces.
Wait, I am not over yet. Ryan backs up his collection of shed plans with a very bold money back guarantee. It applies to everyone. You do not have to be an expert woodworker to be able to benefit from this collection. In fact, any person with our without the basic woodworking skills can benefit from it. And in case, you are not satisfied with the material you get in the ‘My Shed Plan’, you can put a claim for a refund and you will get all your money back. No questions asked. You have the time to look at the collection for 60 days and if even after that you are not happy, it won’t cost you a dime.
You can even go online and look up prices!  For example, if you visit lowes.com, they have a search box where you can enter in the item and find out each price!  This will save you some time.  The only drawback I see to this is that I find it really beneficial to go to these big box lumber stores and see exactly what I want.  For example, the LP Smartside siding panels I recommend to use:  some stores carry a cheap variation of these that have a brown color to them on the inside of the panel, and this is not what you want!  The have the consistency of a 'fibre' panel that will crack easy.  The true LP siding panels are pre-primed on the outside surface and have a natural osb color on the inside surface.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
×