Ditto. It's a scam because, like many other Internet scams of this nature, they have used bogus "review" sites they created themselves (I checked with ICANN) to falsely pump up their value. They charge your credit card immediately, without allowing you to review your purchase, and most importantly, they have ripped off a lot of the "product" from either free sites, such as universities, or even commercial sites that surely don't realize that their product is being used this way. They also have false promises, such as that all the plans will have instructions,etc. Not so, It's just a crazy compliation of junk they scoured off the Internet, repackaged in what seems like about a half hour. Totally bogus.
A garden shed can be strictly functional, but it can also be a decorative focal point around which you design your garden or yard. These plans will help you build a basic shed, but don’t stop there! To customize your shed, you could create a combination toolshed and greenhouse, put a martin house on top, or use part of the shed for a chicken coop or rabbit hutch. If you’re feeling even more adventurous, you could create a living roof of moss or succulent plants.
Pasadena, California, is known for its Craftsman style homes, a great number of which have been carefully preserved and restored. Owned by a University of Southern California (USC)-educated architect, Nott & Associates specializes in the Craftsman style. For a backyard shed, Nott custom designed and constructed the wooden doors, which include period-perfect details and hardware.

Figure A (above) and Figure E show how to build a shed and the exterior trim details. Start by mounting the brackets. Line up the outside edges of the lower brackets with the face of the siding, push them tight to the soffit and screw them to the wall. Center the top bracket on the peak and push it tight to the soffit. Starting with the pieces that go under the brackets, wrap the corners with the corner board. Overlap the front corner board onto the side corner board (Figure E).

Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.

Ambitious recyclers build sheds from existing materials, like doors, reclaimed lumber, windows, and the ever-popular crates. If you are on a tight budget but really want a shed, research the DIY projects featured on social media, in books, and home and garden websites like The Spruce. Whatever you decide, try to follow through with the project. You don't need the added stress of a half-finished shed every time you walk out your back door.


Figure G shows details for the marking jig. Photo 12 shows how to use this setup to draw the curves for the window pieces. Next cut the side pieces (Figure F). Set the side pieces in place over the top of the header and mark the angled cuts (Photo 13). Finish the curved trim piece by first cutting the angles on each end, and then sawing the curves with a jigsaw and sanding them smooth. Use the marking jig to lay out the curved brace, too (Figure G).

Because most DIY manuals and plans are written by ghostwriters who don’t know anything about carpentry, it is common to find incomplete guides. This package is different. Ryan has spent time and effort ensuring that his expertise is laid out in a way that anyone can follow. After all, he is an educator. You also save because the plans make sure you don’t waste material.

Search the hashtag #vintagetrailers on Instagram and you'll discover some 80,000 images of big, small, and mid-sized aluminum travel trailers from roughly the 1950s to 1970s. You might find gleaming silver Airstreams at a lodging rental in Joshua Tree or parked temporarily at a campground near Yellowstone. One trend that hasn't lost steam is the backyard she-shed trailer escape, a dolled-up adult playhouse where women--or men--can escape for alone time or hang out with friends and a bottle or two of wine.  There's even a Vintage Trailer Magazine for enthusiasts. This vintage Aljo trailer rests in the backyard of a house in Pasadena, California.

How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
An inclusive guide as it is, it also acts like a woodworking course it contains detailed illustrations and instructions that help you in creating the shed right from the ground. Even if you are a beginner or a professional, these shed designs can be tackled by you and also will help you in being a long term woodworker. With more than 10,000 plans, the Ryan Shed Plans is the biggest collection you can find on the internet where you can choose from a collection of styles, materials, sizes and therefore it is a definite option for everybody.​
· Personal belongings storage shed — as you are growing older each and every day, you may tend to accumulate so many items that congest your house. You may not want to throw or give away any of the items accumulated as they probably hold a sentimental value to you. The best way in which you can solve a headache is by building yourself a shed which you can be storing your personal items as you continue accumulating them.
Now we can actually start building!  Before you start putting down cinderblocks, lay limestone screening down in all of the channels and run and burry your electrical.  Make sure that your electrical wires are clearly marked (we used caution tape) so that nobody digs them up accidentally in the future.  Once your all set, you can start putting down some cinderblocks.  You may need to break some cinderblocks in half, and this is easily done with a chisel, a hammer, and a bit of time.  Tip:  Set Rebar posts in each corner and tie strings across to help you keep the walls straight.  You need to check every single block for level, especially on this layer as the base of the foundation will affect the rest of the foundation and in turn affect the main structure.
We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
I'm looking about spanning 15' for a gazebo. trying to figure out what dimension beams I need. The Gazebo will be 15'x10'. How big will the beams have to be. at 1/2 the distance on 15' I will have a perpendicular beam running to carry 2x4's running parallel to 15' beam edge. I live in California in there with be no roofing material.. I will be using redwood for lumber Thanks
Shed are also great if you have a hobby. For example, if you’re passionate about pottery, gardening or even painting, you could use the garden shed as your private workspace. You can give it windows if you think you’ll need natural light inside. In fact, this can be an opportunity to upcycle some old windows and doors. Check out this project that we found on countryliving to see how this chic shed was built.
Proceeding with your shed requires smart planning. For starters, you may need a permit from your local zoning authority and/or homeowners’ association to build a new structure on your property; check with the proper authorities before you even invest in the materials. Plus, there may be rules that dictate how you may use your shed, or whether you’re allowed to wire it for electricity. Once you get the go-ahead to build, you’ll want reliable guidelines. For anyone inclined to DIY rather than buy a prebuilt shed, look over a selection of free LP Outdoor Building Solutions plans based on your choice of size and roof style. Each set of plans comes with extensive material and hardware lists, detailed construction information, and tried-and-true building tips.
This step by step diy project is about 10×20 gable shed plans. This shed has a beautiful designs, so it is not only for storage but also for enhancing the look of your garden. The access is easy due to the double doors on one end, and a simple door on one side. The double doors will let plenty of light inside the shed. Take a look over the rest of my woodworking plans, if you want to get more building inspiration. Remember that you need to select the site for the shed with attention and that you have to comply with a few legal regulations.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.
With the wall in position, secure it by screwing down through the bottom 2 x 4 plate and into the floor framing. Frame and erect the rear wall, followed by the front wall. Then, install the interior partition. If you're including a playroom, as we did, cover the partition side that faces that room with plywood, and screw it in place. Then install the final wall.
The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.
For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.

Because My Shed Plans does not promise anything beyond belief, the product’s foundation is pretty strong. People have enjoyed choosing between the collections of shed layouts and building it themselves. It’s a great activity for the whole family, since it’s all well planned out. It can be a bonding experience, the way a team building exercise at work is.
×