· Garden office shed — it is a type of shed which you can build when you need to find time for yourself and also to carry out your own activities. You can carry out your office activities from here since there are no distractions. They are suitable for people with large families and would like to get away from all the noise and distractions that may hinder someone from working smoothly.

A tool shed is pretty easy to build. We found this inspiring example on thecavenderdiary which, as you can see, has a pretty straight-forward, traditional look. It has its back on the wall and inside there’s not much worth mentioning, except maybe for those practical storage hooks, shelves and rods on the inside of the doors. Check out the plans for this toolshed and find a way to customize them according to your own storage needs.
With the wall in position, secure it by screwing down through the bottom 2 x 4 plate and into the floor framing. Frame and erect the rear wall, followed by the front wall. Then, install the interior partition. If you're including a playroom, as we did, cover the partition side that faces that room with plywood, and screw it in place. Then install the final wall.
For the shed's floor deck, use ¾-in. exterior-grade plywood; anything thinner will flex between joists. (Note that a double layer of ½-in. exterior ply is okay, too.) If you plan to store heavy items, such as a lawn tractor or woodworking machines, consider using ¾-in. tongue-and-groove plywood. This costs slightly more, and is a bit more troublesome to install, but its edges lock tightly together, creating a rock-solid, rigid floor. In areas with excessively high moisture and large numbers of wood-boring bugs--such as Florida, Alabama and the other Gulf Coast states--consider using pressure-treated plywood for the floor deck. It's particularly resistant to moisture and insects.
To make it easier for you, the “do-it-yourself” storage shed kits are for sale partially prefabricated to make the assembly of the shed barn kit simple and straightforward. The DIY storage shed kit walls are assembled and the rafters are prebuilt and ready to put into place. While we offer large shed kits as well as small barn kits, on the smaller 6′ and 8′ shed kits, the floor may be partially constructed to make the job even easier.
We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.

DIY Shed Plans

×