These plans are for saltbox roof style sheds.  They are built with trusses that you build.  These sheds are perfect for general storage, garden sheds, tool sheds, potting sheds, playhouses and more.  This shed in my opinion, if you are wanting to build a shed for gardening, this is the one.  It has lots of charm and character with it's desirable design.

· Wood sheds — these types of sheds are made of wood. They are the most common type of shed compared to metal and plastics. They are the most conducive as they can be used as children playhouses, outdoor office and still storage of garden tools. They are also easy to modify and renovate as increasing their size. They are preferred to other types as they blend well with the environment and give the environment a good natural look. However, they must be maintained regularly from insects as termites which feed on wood.
From start to finish, it may seem a little intimidating, but just take it one step at a time. The nice thing about building a shed is that it starts off easy (layout the foundation, building the floor, etc.), and by the time you get to some of the more daunting tasks (like the roof), you would have gained a lot of confidence/experience working your way to that point.

Water is wood's worst enemy. Given the right circumstance and enough time, excessive moisture can rot framing, warp floors and doors, corrode hinges and breed mold and mildew. Fortunately, there's an easy remedy. First, be sure that the lowest wood member--the mudsill--is at least 6 in. above the ground. That's sufficient space to allow fresh air to circulate under the shed.

I felt that this is a very poorly setup web site. I purchased the Ryan’s shed plans online, did not receive an emailed receipt or link to the web site that worked. Phoned Clikbank and they promised to send another receipt. They did not. I had saved the original online confirmation with the links to the site. When I clicked on these it said the files couldn’t be found.
You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
I tell most of my subscribers to use his program as a resource just like you would a book.   His plans are not all you would ever need in regards to shed plans, but it is a nice start.   For the cost of the program, it is on par with any book you would buy at the store to find shed ideas or plans.  However, you get thousands of plans and 4 bonus offers instead of a few good plans.
Copyright © 2019. All Rights Reserved. 3DSHEDPLANS™ is officially registered and protected trademark in the United States. Owned & operated by Netholics Media, LLC. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission or any other requests, please get in touch with us using the contact form provided. Use of this website constitutes acceptance of the 3DSHEDPLANS.COM’s User Terms and Privacy policy.
Woodworking is an art, and like most art forms, it only require dedication, skill and time. Good thing you have our shed plans. You wouldn’t be spending months figuring out how to cut wood pieces, etc. You will get enough guidance to start right away and build a gorgeous shed for your garden. The benefit? You would learn how to build sheds within days. No experiments and no wasting time!

In a Vero Beach, Florida, midcentury modern neighborhood, Sanders Pace Architecture retained the lines and essence of the original house while redesigning it for their client's 21st-century lifestyle. Although it's at the front of the house and initially might resemble a garage, the detached "shed" can be used as a private studio or for guests. Because it's located on the coast, hurricane-proof doors were needed, but cedar was installed over them for an attractive but sturdy structure.
A 1964-built Eichler home was bought in original condition with vintage appliances, fixtures, and finishes. The new owners wanted to retain its iconic midcentury modern design but requested that Gast Architects make some updates to create a calm, light-filled, and inviting home. Gast strived to preserve the signature finishes of the house while creating a larger, more modern kitchen, opening up the floor plan, and updating the master suite. The shed in the backyard repeats the lines of the main house, resembling a mini Eichler.
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
First off, building your own shed through our free or PREMIUM shed plans means you are saving the cost of a professional. If you are wondering you have zero experience in wood working then you shouldn’t be worried; our plans come with precise instructions, material list, diagrams, instructions, etc. There would be absolutely nothing that would leave you wondering.
Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
Build your own shed and you'll instantly have increased space for your tools, a place to work on DIY projects and a way to keep your garage free of clutter. There are many shed plans online that show you how to build your own shed from scratch using wood. It may be easier, however, to use a kit to create a resin, metal or plastic shed instead. A storage shed kit contains all the materials you need including trim. This Home Depot project uses the Keter Stronghold Resin Shed Kit to show you how to build a shed from a kit. We also offer a large variety of other types of shed designs to choose from. Like most, this DIY shed requires tools like a power drill and step ladder to put it together, but assembly instructions will vary by kit. Make sure to follow the manufacturer's instructions carefully.

5 Popular and Best Paving Materials for Your Driveway Based on your goals and needs, you can take your pick from some of the commonly used driveway landscaping materials listed here: Asphalt Concrete Gravel Pavers Shell A driveway can be a really attractive feature of your home that people encounter first, so be wise to opt for the best paving material for your driveway!
No shed, regardless of how well it's built, will last long if it's set on a weak base. Most sheds can be supported by an on-grade foundation, which consists of solid concrete blocks or pressure-treated wood timbers set directly on the ground. The concrete blocks or timbers (aka skids) must be leveled and spaced closely enough to properly support the shed's floor frame. Note that it's important to use solid concrete blocks, not hollow wall blocks, which can easily crack.
• Purchase of two small sheds — it is dangerous to underspend just as it is to overspend. This is because you may underspend and the shed purchased may end up being of little use below your expectations. This will prompt you to build another shed and that will lead you to overspend. A shed may look simple on the outside but it is how you customize your shed that will determine the volume of goods your shed can hold. When building your shed it is important you identify each and every section of your shed, allocate the tools to each section and then modify the shed to hold each and every tool at its place. In that manner, you end up maximizing each and every space in your shed and also utilizing your shed to its maximum capability. It is also recommendable to have adequately spaced sheds where one can perform outdoor activities like car repairing in the shed when the weather is not favorable. Before starting your shed building, think of all its purposes and all the outdoor and semi-outdoor activities one could perform during unfavorable weather condition or any other related circumstances.

Can I tell you a secret? I don’t think I would ever do this again because I have another secret. Shhh, don’t tell, but DIY projects that are a joint effort between my hubby and myself really aren’t fun. They are stressful, and hard and take a toll on us. Which may seem strange in a way because we are both handy and we both enjoy these type of projects and we even have a pretty good idea as to what we are doing. Actually, I think we really have it together – separately! Once you throw the two of us together is gets a little intense. Enough about that, let’s get on to the project.
With these basic easy steps, your structure is complete. You may modify the interior of the shed according to how you will be using it. You may modify it by addition of shelves that you can mount on the walls of the structure. The added shelves also increase the storage capacity of your shed. You may also consider adding a lighting system to your shed, it is highly important. In the next phase of the guide, I will take you through the mistakes that are made in shed building so that you are not stranded in the mentioned silly mistakes.
Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
I have recently purchased a house with an older roof that needs to be restored soon. So, I am trying to decide on I should go with a metal roof other than shingles. If I install metal roofing over solid decking such as OSB or plywood, integrate with a properly insulated garret, there is very little noise difference compared to standard asphalt shingles. I have briefly read benefits and drawbacks of Metal roofing but as I listed before I should go to metal roofing and hiring a roofing contractor no matter its expensive or noisy anyhow, Your article has cleared a lot of misinterpretation I’ve had before.

Interesting lens. When I was growing up on a farm, I had to help when my father built a double-car garage, pighouse, machine shed, doubled the size of the barn etc. They all required foundations and he had us kids place rocks between the shovesl of concrete to save on the cost of cement. Please check out my "Flower Power" lens 'cause I need more Squid likes.


Since outdoor space is limited in a big city, everyone knows you must make smart use of vertical real estate. For a greenhouse/shed in San Francisco's Bernal Heights, Step 3 Studio designed in an open-framework structure that provides shelter for a garden shed that stores potting materials and plants on the ground floor. A steel staircase was built on site, which leads to a second level surfaced in steel grid mesh. The higher elevation is the perfect spot for container plants that require more sun. It's also a nice place to hang out and enjoy views of the city, day or night.
I have 3D shed models for all most all of these shed plans.  Use these models to walk inside or around your shed while you are building to see all the details in virtual reality to make your shed building project easier.  You can even use your smartphone, laptop, virtual reality goggles with the augmented reality feature to see what your shed will look like in your back yard.
Proceeding with your shed requires smart planning. For starters, you may need a permit from your local zoning authority and/or homeowners’ association to build a new structure on your property; check with the proper authorities before you even invest in the materials. Plus, there may be rules that dictate how you may use your shed, or whether you’re allowed to wire it for electricity. Once you get the go-ahead to build, you’ll want reliable guidelines. For anyone inclined to DIY rather than buy a prebuilt shed, look over a selection of free LP Outdoor Building Solutions plans based on your choice of size and roof style. Each set of plans comes with extensive material and hardware lists, detailed construction information, and tried-and-true building tips.
There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
Often referred to as the ebook expert, Bob Burnham's reviews are easily reachable everywhere – blogs, online publications and magazines. He was featured in prestigious publications and he even gained a few rewards for his own ebooks. While constantly releasing new work, his main focus is on unbiased reviews of modern ebooks while pursuing his career as a literature professor. Over the past years, his name was linked with a plethora of bestsellers that were successfully reviewed over the Internet. more

Door placement is also important. You often see doors placed on the gable end of the building, which looks nice, but makes it virtually impossible to reach items stored at the rear of the shed. A better alternative is to put the door on the long side wall, so that you'll be able to access items to the right, left and back. Another option is to install doors on both gable-end walls, so that you'll be able to easily reach items from either end of the shed.
The trick for learning how to build a storage shed is to stretch the line across a scrap of wood at each end so there’s a space between the line and the part you’re straightening. On a wall, for example, tack small scraps of 1/2-in. plywood at each end of the top plate and stretch a line very tightly over the plywood. Then use a third scrap as a gauge to check the distance between the line and the lumber. Use braces or whatever is needed to adjust the top plate until the gauge just fits. Now your top plate will be perfectly straight.
We’re not going to tell you that all pre-made sheds are bad. On the contrary, if you spend enough money, you can buy a pre-made or so-called ‘flat-pack’ shed and it’ll last you a very long time. However, buying a pre-built shed will cost you double, triple or even quadruple what it would cost you to build your own. DIY sheds are cheaper to build than pre-made sheds, and because you are building them yourself from scratch, you can be sure of the quality. This is a key point, because with a pre-made or flat-pack shed, you can never be sure that the lumber being used is of good quality, or even if it came from sustainable sources (if that’s important to you).You can also put your mark on a shed you build yourself. Feel free to mark the lumbar you use to show off your workmanship, and feel free to modify the design of the shed however you like. You won’t be constrained by building your own shed either, meaning you can add shelves and intricate design features as you go along. Until now, the only option you had was to hire a professional to build your shed since you never had the knowledge to do so. But, today is your lucky day! Welcome to 3DSHEDPLANS™, where we offer gable, lean-to and hip shed plans that come with a complete list of tools, accessories, hardware and material you would require to do the job yourself. And, it’s not that difficult at all! Our plans come with detail instructions, 3D dimensions, list of materials and even highlighted points where you need to nail to attach the lumber. What else would you require to start working on your shed right away?
Ryan Henderson is a master woodworker with over 30 years experience and has developed Ryan’s Shed Plans.  This is a detailed digital book with 12,000 shed plans available for instant download with many different bonus offers.  The plans are detailed because they are written by a master woodworker.  He has taught many newbie woodworkers over the past 30 years how to build sheds and other woodworking projects.  He is skilled in the art of woodworking and put together a nice, large set of plans.  The plans are easy to read with step-by-step instructions.
First off, building your own shed through our free or PREMIUM shed plans means you are saving the cost of a professional. If you are wondering you have zero experience in wood working then you shouldn’t be worried; our plans come with precise instructions, material list, diagrams, instructions, etc. There would be absolutely nothing that would leave you wondering.
When you buy this package of shed designs, you have access to the plans for a lifetime. You also get a few bonuses, including a book of professional woodworking tips and extra designs for a variety of woodworking projects. Spend less than $40 today, and you may have what you need to build furniture, toys, sheds and other items for the rest of your life.
My Shed Plans by Ryan Henderson is not just your run-of-the-mill collection of a few hundred shed plans, but it is a collection of whopping 12,000 shed plans. Yes! You heard it right. And each one of them is accompanied with detailed, step by step instructions and diagrams, tool and material list ensuring that nothing goes wrong when you start with one.

Any person interested in the field of woodworking will tell you how much time and effort it goes into building a wood project. And even after putting in so much effort, the chances of mistakes and failures are pretty high. So much so, that after a time you will feel like giving up altogether. Most people spend a lot of time and money on their first shed project and often end up frustrated because what they finally create is nothing like they wanted to. Why? The measurements were all screwed up! If that sounds like your story, it is finally going to change.  With Ryan’s collection of shed plans in your arsenal, you will never ever have to look for shed plans anywhere else.


How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996.
Now that the skeleton of your roof is ready, it’s to go pro. You will be adding roof felt and shingles to make your roof robust, resilient and obviously good looking. Metal roof sheets, fiberglass and felt are some of the basic options you have. Feel free to use any material you like for the roofing. However, we recommend using felt since it is easier to work with and install, and is highly weather and water resistant.
For the shed's floor deck, use ¾-in. exterior-grade plywood; anything thinner will flex between joists. (Note that a double layer of ½-in. exterior ply is okay, too.) If you plan to store heavy items, such as a lawn tractor or woodworking machines, consider using ¾-in. tongue-and-groove plywood. This costs slightly more, and is a bit more troublesome to install, but its edges lock tightly together, creating a rock-solid, rigid floor. In areas with excessively high moisture and large numbers of wood-boring bugs--such as Florida, Alabama and the other Gulf Coast states--consider using pressure-treated plywood for the floor deck. It's particularly resistant to moisture and insects.
We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.

Staining: There are two types of staining. These can either be natural where the stains are purposed to enhance the beauty of the wood or unnatural means which involve activities like painting the wood. In natural means, one has to keep maintaining it frequently as they last for approximately two years while unnatural means last as long as up to eight years without needing any maintenance.
The ad shows the bright shiny new 8x12 Gabled Shed. However, after purchase, that plan does not show up anywhere. I have emailed and requested that plan several times but no response. So, thanks to those who have already posted the 1-800-390-6035 number for ClickBank customer support. It's a chore to work with their VRU but with patience, you can get a refund.

Made from durable blow molded resin, this Alpine shed from Suncast comes complete with 14 windows with delightful contrast trim. The double doors are built with articulating metal hardware so they’re robust and durable. The floor is reinforced for the ultimate sturdy foundation. Extra roof support is provided by the metal trusses and ridge beaming. This shed is perfect when you’re looking for something that is built tough, and stands out beyond the more flimsy and cheap designs that you find on the market. It is large enough to stow everything that you need and keep all items clean, safe, and secure. The outer appearance of this shed makes it perfect for those who want an attractive external design that doesn’t stick out like a sore thumb in your yard. All in all, customer reviews across the board are quite positive for this shed, and it makes a great addition to anyone’s home.


If you plan to paint your shed, natural wood siding isn’t necessary. You can buy sheets of OSB (oriented strand board) siding at a fraction of the cost of real plywood, and it’ll probably last longer too. LP SmartSide panel is one brand. You can buy plain, grooved or stucco-like panels in several thicknesses and sizes. Ask at your local lumberyard to see what’s available.
Now that the skeleton of your roof is ready, it’s to go pro. You will be adding roof felt and shingles to make your roof robust, resilient and obviously good looking. Metal roof sheets, fiberglass and felt are some of the basic options you have. Feel free to use any material you like for the roofing. However, we recommend using felt since it is easier to work with and install, and is highly weather and water resistant.
Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
A backyard shed frees up your home and garage by storing cumbersome essentials like your riding mower, hedge trimmers, and other lawn care equipment. But these sturdy little buildings can serve a host of other practical functions—and hobbies too. Think chicken coop, greenhouse, screening room—the list is limitless! For a shed to live up to its potential, however, it’s crucial to avoid common building mistakes. The dos and don’ts listed here, courtesy of the LP® Outdoor Building Solutions® pros, will help ensure that your shed meets your needs for years to come, whether you’re simply using it for storage or tricking it out as your outdoor fun zone.
• Time underestimation — people normally underestimate the time taken to build any given structure. It is a normal occurrence when building delays, the delays may be caused by issues as inadequate tools and climatic changes that would not allow outdoor activities as the building. Building any kind of structure may take longer than expected. It is therefore important to do things at a fast rate to reduce the number of delays that one has to encounter and also reduce frustration brought about by delays. Completion of construction is also advantageous as one gets to start using the structure sooner than expected which to some extents save on your finances.
The slanted roof of a modern house in the San Francisco Bay Area is echoed in this small wooden tool shed. Conceived by Astrid Gaiser Garden Design, the shed becomes an interesting part of the landscape design instead of something tucked or hidden in a corner or side yard. Gaiser even added a chalkboard for kids and adults to draw and write messages.
If you plan to paint your shed, natural wood siding isn’t necessary. You can buy sheets of OSB (oriented strand board) siding at a fraction of the cost of real plywood, and it’ll probably last longer too. LP SmartSide panel is one brand. You can buy plain, grooved or stucco-like panels in several thicknesses and sizes. Ask at your local lumberyard to see what’s available.
As we have seen there are numerous design which you may use to build yourself a shed of your choice. The truth is there are numerous shed designs which come up every year which we cannot discuss details but only mention them. These examples of sheds include attached firewood storage, Ivy, Windows, Double door, Decorative door, Porch, Shutters, End entry side entry and many others.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
×