Building a Shed should be a fun project that provides the satisfaction of creating something and a sense of accomplishment. We have put great effort into our shed plans to make them easy to follow and work from. The How To Build A Shed eBook that is included with every shed plan is designed to show all the different steps involved in building a shed. The materials list is detailed out so that every part of the shed has a label which makes it easier to put each part where it goes. Let us know how your shed building project goes, we love to hear about and see photos of our customers building their sheds! Find the email address at the top of this page to send in your shed building photos.


Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
Since the shade is an outdoor structure, it will face various weather elements like sunshine, rain, snow, wind and other factors as insects and moulds. If you are not sure on the wood selection, it would be better to seek advice from a wood expert who will guide you through the best wood you would use to build your shed depending on the climate your region experiences.

The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.
It’s not always possible, but if you’re using 4 x 8-ft. sheet siding and have enough helpers around to lift the wall when you’re done, you can save time by siding the walls before you raise them. Make sure to straighten the wall plates and square the wall by measuring diagonally before you nail on the siding. This is easier to do on a wood shed floor because you can tack the plates to the floor to hold the wall straight and square while you install the siding.
The Roofs of the sheds usually come in different shapes, sizes, and styles. One impeccable style among then is the Gambrel Roof, highly associated with barns and pole barns. The advantage of adopting this style is that these sheds can be used as high capacity storage spaces because of the steeper sides. Most of the recent homes have Gambler Roof Sheds because of the intricate beauty they bring to the home. Instead of bringing a standard roof, it won’t make much difference to bring a Gambrel Roof, given that you match the materials to your building.​
Finding MyShedPlans seemed too good to be true; 12k shed plans, 3-D renderings, detailed material lists, but wait, there's more! Hundreds of useful guides, woodworking books, and project ideas ranging from birdhouses to bridges. And what was more, was the promise of an easy download and immediate access to boundless amounts of material so I could be right on my way to a sharp new shed.
After the concrete is all ready, the sole plates are then joined together with the anchor plates which protrude out of the foundation. Use the carpenter’s pencil and measuring tape to mark about one and a half inches from the board end continually every sixteen inches till the further end. These marks guide where the studs will be placed. Mark where the anchor and the mudsill meet up with a different marker from the one used initially. The studs are then taken and galvanized nails are driven through the marked areas into the center of the board until they reach the stud bottom. The studs should be secured to the baseboard.

Now that the skeleton of your roof is ready, it’s to go pro. You will be adding roof felt and shingles to make your roof robust, resilient and obviously good looking. Metal roof sheets, fiberglass and felt are some of the basic options you have. Feel free to use any material you like for the roofing. However, we recommend using felt since it is easier to work with and install, and is highly weather and water resistant.
The next section of the guide that I will take you through is the best ways and designs one may use to build an ideal shed according to one’s desires. We all have different tastes, so it is important to go through some of the designs used so that one may pick the design that suits you better. I will discuss the different best sheds designs and their benefits.

· Personal belongings storage shed — as you are growing older each and every day, you may tend to accumulate so many items that congest your house. You may not want to throw or give away any of the items accumulated as they probably hold a sentimental value to you. The best way in which you can solve a headache is by building yourself a shed which you can be storing your personal items as you continue accumulating them.


Once you decide that adding a shed will increase the enjoyment of your outdoor space, it’s time to ask pertinent questions to assess your needs. Consider exactly how you want to use your shed, what design will best suit those tasks, and how much your budget will allow. Learn what features are most popular, and why. Also research what’s really involved with building a shed yourself, as opposed to hiring a pro to do the job, and be sure you understand such important factors as warranty and delivery.
• Spending too much money on unnecessarily expensive sheds — sheds the main purpose is to house outdoor and garden tools that cannot be stored in the house. Some people spend a lot of their money on large and stylish sheds which to my opinion in unnecessary. Spend your money wisely. You can save a lot of money on shed building by avoiding to hiring a huge manpower in the construction. You may even save some of your money by enquiring price rates of the items you need at various lumberyards, you will be able to know who have the best quality products at affordable prices.
As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.

We found all the materials to build this shed at our local home center. Most of the construction is straightforward and requires only standard carpentry tools and a circular saw. For how to build the shed windows and door, you’ll also need a table saw, power miter saw and router. We used a Kreg pocket hole jig and pocket hole screws to assemble the door and windows. Another really great thing about small storage sheds such as this on, it don’t take as long to build! With a helper or two, you could have the platform and shell built in two or three days. Then expect to spend four or five more days completing the siding, trim, doors, windows and roofing.
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.
From start to finish, it may seem a little intimidating, but just take it one step at a time. The nice thing about building a shed is that it starts off easy (layout the foundation, building the floor, etc.), and by the time you get to some of the more daunting tasks (like the roof), you would have gained a lot of confidence/experience working your way to that point.
When I tried my first woodworking project, all I wanted to is quit it even before I completed and most of my measurements went wrong, leaving me frustrated. Are you the same? Did you waste the materials, resources, money, time and energy doing it? Have you been to the DIY stores only to come back with hopeless things that turned out to be unfit taking around half a year or an entire year to complete the wooden shed? To change that, you should avoid the doubling over of materials, shorten the time and reduce the invested energy as well.​
Does this all sound very promising and great, but you still have your doubts about not being certain how to build a shed and if you are brave enough to buy the shed blueprints? We can help here as well with our newest book How to build a tiny house. This step by step guide with illustration and photographs provides useful information and in-depth instructions regarding every area of timber frame construction and its foundations, walls, roof and floor. You can order it anytime on our website, in a print version or as ebook.
Shed are also great if you have a hobby. For example, if you’re passionate about pottery, gardening or even painting, you could use the garden shed as your private workspace. You can give it windows if you think you’ll need natural light inside. In fact, this can be an opportunity to upcycle some old windows and doors. Check out this project that we found on countryliving to see how this chic shed was built.
I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.
This shed, one of our most popular outdoor storage sheds ever, features some unique details that make it look more expensive than it really was to build. Arch-top windows and a custom door give this shed a high-quality look that belies its low cost and simple construction. The panelized construction technique means you could build the parts in your garage on a rainy weekend and then haul them to the site for assembly. Modest finishes like OSB siding and composite trim and fiberglass shingles help keep the materials cost low. And you’ll save hundreds of dollars by providing your own labor to build the door and windows for some cheap outdoor storage. The modular construction and wood platform foundation mean you can construct this shed almost anywhere, even on remote or sloping sites. In this article, we’ll show you the basics of how to build the shed and install the windows and doors.
Don’t assume that you’re missing something if you have a question that cannot be answered within the guidelines of the shed plans. Builders at all levels will always have questions and it is better to ask the question than miss something important in the process. Go online and find a forum or a video if you have a question. Better yet, read all the little print that you skipped over in your shed plan and see if the answer is there, it might be.
Build your own shed and you'll instantly have increased space for your tools, a place to work on DIY projects and a way to keep your garage free of clutter. There are many shed plans online that show you how to build your own shed from scratch using wood. It may be easier, however, to use a kit to create a resin, metal or plastic shed instead. A storage shed kit contains all the materials you need including trim. This Home Depot project uses the Keter Stronghold Resin Shed Kit to show you how to build a shed from a kit. We also offer a large variety of other types of shed designs to choose from. Like most, this DIY shed requires tools like a power drill and step ladder to put it together, but assembly instructions will vary by kit. Make sure to follow the manufacturer's instructions carefully.
The advertising was incredibly misleading. The early indications (at least via ********) are that you can purchase downloadable shed plans. Further claims are made that **** ********* is offering something unique in the detail and instruction, such that someone with no building experience could purchase material, fabricate, and build these sheds. First, that is not at all the case. most of these "plans" are only one-page shots. Second, most of the plans couldn't be build even by someone who is in construction or familiar with building. This stops just short of being a SCAM. At the very least, it's extremely misleading. **** ********* should be ashamed of himself.
This shed featured on houzz is inspiring in many different ways. First, check out the design. Isn’t it charming how all the different types of wood and all the different colors complement each other? What a wonderful way to use reclaimed wood pieces…Another detail that has to do with the design is the fact that this shed has clerestory windows. It’s not usually common for shed to have windows of any kind but, when you think about, it’s a pretty practical feature.

I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.


These days, it is not very easy to translate your wooden shed plans into a standard written format without losing any valuable information. In order to learn how to build high quality wooden sheds, it is important to consult an expert. However, consulting an expert may not be viable for every individual. In addition to this, the internet provides you with extensive information about a wide range of subjects.
×