It is worth mentioning that the files in this program can be easily downloaded into PDF format. This provides you with each access at your construction site. The best part is that you can easily browse through different shed plans on your server, and pick the ones that meet your specific project needs and requirements. You can even download everything on your server. The process is very easy to access and understand.

Staining: There are two types of staining. These can either be natural where the stains are purposed to enhance the beauty of the wood or unnatural means which involve activities like painting the wood. In natural means, one has to keep maintaining it frequently as they last for approximately two years while unnatural means last as long as up to eight years without needing any maintenance.
When you have around 12,000 plans that are claimed to be shed designs, not all of them can be good. Some of them are predominant, some of them are mediocre while some of them are utterly absurd and are even hard to read. There are even incomplete plans in the Ryan Shed Plans package, and many of these plans don’t include the materials, making it frustrating. The download pages of most of the designs in Ryan Shed Plans are not organized.

5 Popular and Best Paving Materials for Your Driveway Based on your goals and needs, you can take your pick from some of the commonly used driveway landscaping materials listed here: Asphalt Concrete Gravel Pavers Shell A driveway can be a really attractive feature of your home that people encounter first, so be wise to opt for the best paving material for your driveway!
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.
For example, the last three sheds I built were trimmed with white PVC trim boards instead of painted cedar 1 x 4s. This new plastic lumber, which I used for the rake, fascia, frieze and corner boards, is impervious to bugs, warping, splitting or decay, and it never needs painting. Other low-maintenance options include: vinyl or aluminum windows, faux-slate roof shingles, fiberglass or steel doors, composite decking for steps, and fiber-cement siding. (I don't usually recommend aluminum or vinyl siding for sheds; neither material is rugged enough to survive the inevitable beating outbuildings take.)
Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.

You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
Since outdoor space is limited in a big city, everyone knows you must make smart use of vertical real estate. For a greenhouse/shed in San Francisco's Bernal Heights, Step 3 Studio designed in an open-framework structure that provides shelter for a garden shed that stores potting materials and plants on the ground floor. A steel staircase was built on site, which leads to a second level surfaced in steel grid mesh. The higher elevation is the perfect spot for container plants that require more sun. It's also a nice place to hang out and enjoy views of the city, day or night.
· Garden office shed — it is a type of shed which you can build when you need to find time for yourself and also to carry out your own activities. You can carry out your office activities from here since there are no distractions. They are suitable for people with large families and would like to get away from all the noise and distractions that may hinder someone from working smoothly.
A shed-like companion residence was built adjacent to the existing house on this property in Austin, Texas. Designed and constructed by Moontower, the structure features exposed plywood, blackened steel, clear sealed cedar, and pine, exposed structural elements, and utilitarian lighting fixtures. A balcony gives the building a treehouse feel and offers views of the Austin skyline and a nearby college bell tower.

Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996.
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
One look at everything you receive with this program and there’s no way you’ll ever opt to pay someone tons of money to do the exact steps that you have right in front of you. Ryan’s Shed Plans is the smart, affordable and easy way to build whatever it is that you want in your backyard. Whether it’s a rustic yard shed, a cottage shed, a garden shed, a gambrel barn or something else, you finally have all the (actual) steps needed to easily build it on your own. The program comes with way more than just a couple of project plans. Instead, it provides with you 12,000 different shed plans to choose from. So, if you want a shed with glass walls or a shed that’s perched on a porch, there’s a plan for it.
I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.

The roof truss can be built using 2x4 or 2x6 lumbers. There are different ways to build the truss, the most common is cutting out the rafters and assembling them using gussets. The easiest way to build the roof truss will be using plans. The other option will be to lay the 2x4’s or 2x6’s on the level floor set them how you want your roof and make a template. Once you are happy with the look of your template you can build the rest.
You will find that the shed blueprints are mostly just that. These are not step-by-step instructional material like you might think. Instead, they are merely design drawings. They include a variety of views, (plan, elevation, perspective), and a description. Sometimes you’ll get a materials list. And while there are admittedly a few that give full instructions, most of them are just shed designs and plans. But because they’re from different sources, some of them are the wrong way round.
Well, not these plans. You have the option of building a very functional and spacious lean-to shed on different foundations. Your foundation choices are a concrete slab, a wooden floor supported by concrete piers, or a wooden floor supported by skids. That lost option also means that your lean-to could be mobile as well so you won’t have to decide where you want to permanently put it.
The plans I purchased were not as described in the web advertising. In additon, I also purchased some addons/upgrades and was supposed to receive a link in a separate email to download these 'extras'. I never received the email with the link. I have contacted them twice thru their customer service support from and the following popup appears after you submit your request: YOUR TICKET HAS BEEN SENT Do allow up to 2 days for a reply from our support team. Do note that our helpdesk is closed on weekends. Tickets submitted during this time will be answered on Monday. I have not received any response from them nor has my purchase price been refunded as was promised in their ad - see below: P.S - Remember...you have my 100% Risk Free 60 Days Money-Back Guarantee - you can still keep any bonuses as my gift - if the product is not exactly as it is stated here and you are unsatisfied - I'll refund your money.. Apparently Mr. ********* has made a practice of not responding to...
Also square the frame by making sure diagonal measurements from opposite corners are equal. Then tack one corner to hold it square. Finally, nail the soffit to the roof frame with 6d galvanized box nails. We used 12-in.-wide fiber cement siding for soffit material. Mount an inexpensive carbide blade on your circular saw to cut the fiber cement. Set the roof panel aside and build the other half of the roof using the same techniques.
After the concrete is all ready, the sole plates are then joined together with the anchor plates which protrude out of the foundation. Use the carpenter’s pencil and measuring tape to mark about one and a half inches from the board end continually every sixteen inches till the further end. These marks guide where the studs will be placed. Mark where the anchor and the mudsill meet up with a different marker from the one used initially. The studs are then taken and galvanized nails are driven through the marked areas into the center of the board until they reach the stud bottom. The studs should be secured to the baseboard.
It can be easy to get excited and overestimate your DIY abilities when you start a new project. The passion and excitement makes you want to dream big and get creative. But blindly following your imagination can be a step in the wrong direction. If you’re a newbie to DIY woodworking, then you’ll probably want to keep it simple. Otherwise you run the real risk of ending up with a sub par build or even having to rebuild it altogether.
• Improper geographical placement — this is one of the huge mistakes one may make while shed building. It may be too close to your house hence obstructing your beautiful view from your living room or your kitchen as you are cooking. The last thing one would want is not like your house because of a simple thing as a view, so be careful with where you place your shed. One may also build the shed too far away from their house which again is an inconvenience. Who would want to walk from your house to your shed to get some tool you need and you have to trek some long distance? You may also need your shed someplace you can see due to the security reasons. You would want some stupid thief taking your stuff without you see them, would you? Or walking down a snowy lane during a chilly night just so you could get something from your shed. Before building your shed consider all the factors whether positive or negative and then come up with the place in your compound with the most advantages compared to disadvantages.
Hi, my name is Jack Taylor. Welcome to YOUR DISCOUNT WEBSITE! We have exactly what YOU are looking for! Get a huge discount for the product you want. Most products offer bonuses too. From time to time I'm able to secure discounts and bonuses through my affiliate relations with these products for YOU. You better act FAST! Some of these "RED HOT DEALS" are (TIME LIMITED OFFERS ONLY!) You can also find me on Google+.
When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.
Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
No shed, regardless of how well it's built, will last long if it's set on a weak base. Most sheds can be supported by an on-grade foundation, which consists of solid concrete blocks or pressure-treated wood timbers set directly on the ground. The concrete blocks or timbers (aka skids) must be leveled and spaced closely enough to properly support the shed's floor frame. Note that it's important to use solid concrete blocks, not hollow wall blocks, which can easily crack.
Finding MyShedPlans seemed too good to be true; 12k shed plans, 3-D renderings, detailed material lists, but wait, there's more! Hundreds of useful guides, woodworking books, and project ideas ranging from birdhouses to bridges. And what was more, was the promise of an easy download and immediate access to boundless amounts of material so I could be right on my way to a sharp new shed.
So I recommend paying for the basic package, browsing the terrible selection of blueprints, saving the URL, then demanding a full refund. You'll get all your money back, plus you can keep all the crummy blueprints you purchased. Just make sure you contact ClkBait (or whoever they are) directly, Ryan's shed goons will try to stall your refund if you go through them.

The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.
It can be easy to get excited and overestimate your DIY abilities when you start a new project. The passion and excitement makes you want to dream big and get creative. But blindly following your imagination can be a step in the wrong direction. If you’re a newbie to DIY woodworking, then you’ll probably want to keep it simple. Otherwise you run the real risk of ending up with a sub par build or even having to rebuild it altogether.

In reality, the Ryan Shed Plans also known as MyShedPlans Elite; is a huge collection of different wood construction plans, craft designs, shed blueprints, storage shed designs, birdhouse designs, garage designs, rocking horse sheds and even the end table designs. All the plans that are contained in Ryan Shed Plans contain step by step instructions like you have expected, and therefore, these are more than just mere designs. They naturally include a variety of blueprints of the same shed design the plan, the elevations, the sections, perspective of the shed, a description, legend containing the materials, tips and tricks but a few of them admittedly are not as designed as the rest.​
I have spent a truckload of time on the same for five years by purchasing and reading Woodworking books, going through woodworking plan blueprints and understanding woodworking designs. While some of them are very detailed most of them left with questions more than answers because of the incompetency and inadequacy in the design details. I haven’t come across a single plan that had everything I needed, forget the step by step instructions.
· Saltbox sheds — they are a very attractive type of sheds which one would not mind having it anywhere in the compound. Due to its shape, it can be used to store larger amounts of items and can be used in different ways depending on their size as they come in different sizes. They are also used as children playhouses. As in the gable shed, this type of shed has two faces of roofs which meet at the center to form a peak. The only difference between the two sheds is that the saltbox sheds one of the roof sides is significantly shorter than the other.
Once redirected to the webpage, I found a bewildering list of links, and downloads. Some were redundant, some didn't work. And I kept trying to figure out where the 12k plans were. I thought for what I paid I should be able to plug in my parameters into a query and get something that remotely looked like an organized list of plans that matched my query. But nada. Nothing. Zilch. Just piles of pdf's tucked seemingly haphazardly into folders here and there, listed in not too logical order in links on a webpage.

Structurally speaking, some sheds are actually miniature versions of houses or barns. The gambrel storage shed plans from mybackyardplans explain the basic steps of such a project. First, the foundation is built. Then the sidewalls are installed, after that comes the roof frame, the front wall and the door, then the back wall and roof decking, the trim and finally the shingles. At the very end, the shed is painted.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
BBB Business Profiles are provided solely to assist you in exercising your own best judgment. BBB asks third parties who publish complaints, reviews and/or responses on this website to affirm that the information provided is accurate. However, BBB does not verify the accuracy of information provided by third parties, and does not guarantee the accuracy of any information in Business Profiles.
These plans are for saltbox roof style sheds.  They are built with trusses that you build.  These sheds are perfect for general storage, garden sheds, tool sheds, potting sheds, playhouses and more.  This shed in my opinion, if you are wanting to build a shed for gardening, this is the one.  It has lots of charm and character with it's desirable design.

Door placement is also important. You often see doors placed on the gable end of the building, which looks nice, but makes it virtually impossible to reach items stored at the rear of the shed. A better alternative is to put the door on the long side wall, so that you'll be able to access items to the right, left and back. Another option is to install doors on both gable-end walls, so that you'll be able to easily reach items from either end of the shed.


You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
×