· Firewood storage sheds — mainly used to store firewood from elements of weather such as rainfall that may destroy them. The most common type of firewood shed is the lean on shed. It is also the most suitable as it allows free circulation of air, therefore, preventing dampness of the firewood. It is also near the house so the firewood is stored near your house and may access anytime you need them.
My Shed Plans just might be every do-it-yourself junkie’s dream product. Ryan Henderson, the creator of My Shed Plans, has been building one-of-a-kind outdoor sheds for more than 20 years. If you believe his story, he has unselfishly decided to share his love of woodworking and carpentry through his guides which will enable the everyman who does not have handyman experience to build their very own outdoor shed. Can it be true?
· Wood sheds — these types of sheds are made of wood. They are the most common type of shed compared to metal and plastics. They are the most conducive as they can be used as children playhouses, outdoor office and still storage of garden tools. They are also easy to modify and renovate as increasing their size. They are preferred to other types as they blend well with the environment and give the environment a good natural look. However, they must be maintained regularly from insects as termites which feed on wood.
Copyright © 2019. All Rights Reserved. 3DSHEDPLANS™ is officially registered and protected trademark in the United States. Owned & operated by Netholics Media, LLC. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission or any other requests, please get in touch with us using the contact form provided. Use of this website constitutes acceptance of the 3DSHEDPLANS.COM’s User Terms and Privacy policy.
Please note that fully assembled buildings and storage shed kits are the same price. This is due to the fact that storage shed kits from Sheds Unlimited are typically assembled in the manufacturing facility. The walls are temporarily put together as though the building was to be delivered as a unit. This allows us to be sure that the parts are properly assembled and also allows us to paint the garden shed kit. Since the DIY shed kit is painted in our facility, it should only need some touch up paint after it is assembled on your property.
Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
The shed we built rests on a foundation made up of 12 solid-concrete blocks. The 4 x 8 x 16-in. blocks are arranged in three rows spaced 59 in. apart. These blocks are typically set directly on the ground, but we put down a 4-in. bed of gravel first because our site occasionally receives groundwater. The gravel will keep the soil beneath the shed from eroding or becoming soggy.
High-quality materials may cost a bit more, but they’ll save you time, trouble, and money in the long run. The chart here shows how LP® SmartSide® Panels compare with untreated plywood, vinyl, and galvanized metal. No wonder so many pros recommend sheds made with beautiful, durable LP products! If you want your shed to resist splitting, cracking, decay, and termite damage while duplicating the good looks of rich, real cedar, choose LP SmartSide® products.

We are architects inspired by the tiny house movement and its philosophy. The ideals of downsizing the space we inhabit in order to achieve a minimalistic and simple living have always been close to us. Therefore, we specialize in designing micro homes plans. Tiny houses, cottages or cabins, but also playhouses or DIY shed plans, where we can fulfil our love for simple, space-effective and practical solutions. Ideal properties of wooden shed blueprints, don’t you agree?

Remember that anything you build will either add or detract from your property's appearance and may impact your property value. Metal and vinyl materials may be easier to maintain, but are the least expensive options and tend to look cheap. Natural wood and prefinished wood products will add character and value, but are typically more expensive to buy and maintain.
Pressure treated sheds, on the other hand, are made out of timber planks that usually have moisture which is sucked out of them using a special cylinder under vacuum conditions. After the moisture is sucked out, a preservative is added to the wood at a relatively high pressure until the preservative is absorbed into the grain, making it an integral part of the wood. This particular type provides around 15-year guarantee as mentioned by the manufacturers even against harsh weather.
Would we do it again? I won’t sugar coat it, this is real life so probably not. Some things aren’t worth the aggravation or the stress. In the end, we didn’t save that much money by building the shed ourselves. I think the total cost was around $1200. But I can tell you one thing, if we are ever attacked by zombies or if there is an Armageddon I am hiding in the shed because the big bad wolf can huff and puff and nothing is taking this structure down. 
• Lack of harmony — building a shed that does not match the design or the color of your house would make the compound look a bit odd. It is advisable that you choose a suitable architectural design and color that will closely match with your house. That gives your compound a great look and also makes it look like both structures were built at the same time. It also gives you a sense of satisfaction and hence you will not have to waste money in the future to make one structure resemble the other.
A saltbox shed is defined by its double sloping roof style. The front roof has a steep slope of 12/12, and the rear roof has a lower slope of 5/12. Most plans have options for the doors on either the front or side. Click on the images to view more details. The saltbox style evolved from the practice of extending the second floor roof line down to the first floor level to create additional covered living space. The design adds a south eastern flair to back yard shed designs.
Nothing dresses up a shed like brackets. They’re the ultimate low-effort, high-impact feature. In some cases they also provide extra support for your gable-end overhang. Depending on the design, you can build brackets from 4x4s or by laminating 2-by boards. Make a full-scale drawing to work out the details. Then build the brackets and attach them to the shed. Install the brackets tight to the underside of the overhang, and then notch the fascia board to fit over them.

Materials for this door cost about $140. A similar style prehung exterior door can easily cost more than $1,000. Of course, this door isn’t as weather-tight as a prehung door, and it wouldn’t work on your house, but it’s perfect for a shed. You get the look of an expensive custom wood door without the cost, it’s one of those awesome shed ideas that look great.
The roof trusses support the plywood and shingles that make the roof waterproof.  They are very important to plan carefully because they require strange angles and they have to fit the structure below them.  We gave our shed a slight awning and this had to be accompanied by the trusses, which overhang the walls of the shed by about a foot on each side.  When constructing your joists it is important to use joist plates otherwise the angles that you so carefully planned will not remain true for very long.  We used a 2x4 to support the joists while we were attaching them to the walls.
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.
The next section of the guide that I will take you through is the best ways and designs one may use to build an ideal shed according to one’s desires. We all have different tastes, so it is important to go through some of the designs used so that one may pick the design that suits you better. I will discuss the different best sheds designs and their benefits.
Now you have finished your shed!  Once your doors are on, you can add latches and locks.  The windows on our shed are made of 1/4 inch thick plexiglass held in with white silicone to match the trim.  The floor was finished with concrete tiles. You can now choose to leave the inside of your shed barren, to say, store a few larger items, or you can add shelves like we did.  We added the shelves because we had a lot of small boxes and things that we wanted to move out of the garage.  They are made from 7/16 inch thick oriented strand board and 2x2s.  The shelves in the middle have some spare 6x6 chunks keeping them up, which is suitable because they are the deepest and are designed to hold the heaviest items.  They are so strong that you can climb on them, even jump on them!  We also added a bike rack on the right hand side that can hold our five bikes.  The finishing touch on the shed was to add an electrical outlet and a flourescent lighting fixture with a switch.  There is a vent in the back wall for warm summer days but it is probably unneccesary.  Hopefully you can build your own storage shed and de-cluterize your life as well.  Thanks!
I don't waste my time on free plans, store-bought sheds, or ready-made, mail order kit solutions... been there, done that. Free means lack of user feedback and you get absolutely no customer support. With store-bought and ready-made mail order sheds: they're flimsy, profit-driven solutions that I've always had to tear apart and modify too much to get the storage space to work or to match the character and style of the home.
The best spot for a shed is level, well-drained ground close to where you work in your garden or yard. The location doesn’t need to be perfectly flat; the foundation design shown in the plans allows for adjustments to make the floor level. Small sheds require only a top-of-soil foundation, even in locations with freezing winter temperatures. Precast concrete deck blocks work perfectly for this.
Now we can actually start building!  Before you start putting down cinderblocks, lay limestone screening down in all of the channels and run and burry your electrical.  Make sure that your electrical wires are clearly marked (we used caution tape) so that nobody digs them up accidentally in the future.  Once your all set, you can start putting down some cinderblocks.  You may need to break some cinderblocks in half, and this is easily done with a chisel, a hammer, and a bit of time.  Tip:  Set Rebar posts in each corner and tie strings across to help you keep the walls straight.  You need to check every single block for level, especially on this layer as the base of the foundation will affect the rest of the foundation and in turn affect the main structure.

Woodworking is an art, and like most art forms, it only require dedication, skill and time. Good thing you have our shed plans. You wouldn’t be spending months figuring out how to cut wood pieces, etc. You will get enough guidance to start right away and build a gorgeous shed for your garden. The benefit? You would learn how to build sheds within days. No experiments and no wasting time!
You can even go online and look up prices!  For example, if you visit lowes.com, they have a search box where you can enter in the item and find out each price!  This will save you some time.  The only drawback I see to this is that I find it really beneficial to go to these big box lumber stores and see exactly what I want.  For example, the LP Smartside siding panels I recommend to use:  some stores carry a cheap variation of these that have a brown color to them on the inside of the panel, and this is not what you want!  The have the consistency of a 'fibre' panel that will crack easy.  The true LP siding panels are pre-primed on the outside surface and have a natural osb color on the inside surface.
I tell most of my subscribers to use his program as a resource just like you would a book.   His plans are not all you would ever need in regards to shed plans, but it is a nice start.   For the cost of the program, it is on par with any book you would buy at the store to find shed ideas or plans.  However, you get thousands of plans and 4 bonus offers instead of a few good plans.
Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.

Don’t be tempted to get sloppy when you square up the floor and walls of your shed. An out-of-square start will haunt you through the rest of the project, from doors and windows to trim and roofing. For a concrete slab, measure diagonally across the opposite corners of the form boards. Then adjust the forms until the diagonal measurements are equal. Do the same for a wood platform floor. If you’re installing sheet siding on the walls, before you stand them up, measure diagonally and square up the wall before you nail on the siding.
Then, you will need to install a series of floor joists across the entire length of the support beams; these will need to be the same length as the distance between the two rim joints so that they’ll fit between them. In the example design, the floor joists are all separated by 14.5-inch gaps except for the outermost two, which are 13 3⁄4 inches (34.9 cm) from their immediate neighbors; this is to allow a standard piece of plywood to line up with the outermost edge of the outermost joist but only cover half of an interior joist, allowing its neighbor to cover the other half so that both can be supported properly.[3]
A shed isn’t something you see people build…at least not very often. It’s rather the type of structure you discover in the backyard when you purchase an old house. So how do these things appear? They’re obviously built so let’s see what it takes so put a shed together. We looked around and we found a bunch of shed plans that we’d like to share with you. They’re pretty simple and you don’t need much experience with this sort of projects to be able to pull it off. They’re all customizable so you can enjoy them whether you want a pretty she shed or a manly workshop.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
We are architects inspired by the tiny house movement and its philosophy. The ideals of downsizing the space we inhabit in order to achieve a minimalistic and simple living have always been close to us. Therefore, we specialize in designing micro homes plans. Tiny houses, cottages or cabins, but also playhouses or DIY shed plans, where we can fulfil our love for simple, space-effective and practical solutions. Ideal properties of wooden shed blueprints, don’t you agree?
Figure G shows details for the marking jig. Photo 12 shows how to use this setup to draw the curves for the window pieces. Next cut the side pieces (Figure F). Set the side pieces in place over the top of the header and mark the angled cuts (Photo 13). Finish the curved trim piece by first cutting the angles on each end, and then sawing the curves with a jigsaw and sanding them smooth. Use the marking jig to lay out the curved brace, too (Figure G).
I have spent a truckload of time on the same for five years by purchasing and reading Woodworking books, going through woodworking plan blueprints and understanding woodworking designs. While some of them are very detailed most of them left with questions more than answers because of the incompetency and inadequacy in the design details. I haven’t come across a single plan that had everything I needed, forget the step by step instructions.
Now, imagine a price you think you might have to pay for such a comprehensive package – sure you will think not less than a few hundred at least. The good news is that Ryan is offering all of it at an unbelievable price of just $37. I am sure you were quite blown away when you heard about the quantity and quality of the shed plans and the bonuses you would be getting with them. So, doesn’t $37 for so many useful resources on woodworking sounds like a great idea. In my opinion, surely it is. Once, you have this collection in your arsenal, you are never going to run out of ideas. That is assured.
I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.
Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.
Do not make the mistake of not building your own shed because you have never done it before. With the right shed plans you will get the same results the experts get. Begin by choosing plans you feel comfortable with and know you can follow along. Simply follow the steps provided, measure correctly, and in no time you will construct your own shed. Study the building guide to get familiar with all the steps and to get to know the names of all the parts.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.
×