These days, it is not very easy to translate your wooden shed plans into a standard written format without losing any valuable information. In order to learn how to build high quality wooden sheds, it is important to consult an expert. However, consulting an expert may not be viable for every individual. In addition to this, the internet provides you with extensive information about a wide range of subjects.
Ryan Henderson is a master woodworker with over 30 years experience and has developed Ryan’s Shed Plans.  This is a detailed digital book with 12,000 shed plans available for instant download with many different bonus offers.  The plans are detailed because they are written by a master woodworker.  He has taught many newbie woodworkers over the past 30 years how to build sheds and other woodworking projects.  He is skilled in the art of woodworking and put together a nice, large set of plans.  The plans are easy to read with step-by-step instructions.
Normally we try to help our customers as much as possible, especially if it is a matter of helping to figure out where certain material goes on the building. Keep in mind, you are responsible for correctly constructing the shed if you purchase a kit, but we can offer direction. (Prior construction experience is recommended.) If there is any uncertainty about whether or not you will be able to assemble the storage shed, consider one of our build-on-site options and we will send a team to assemble the building for you.
A few decorative touches can help your shed fit in with the architecture of your home and even convey how you use it. Some folks like to dress things up with a front porch, dormer, or gable, but simply adding barn-style doors, shuttered windows, and a bit of gingerbread trim can make all the difference. Color, of course, goes a long way too. Check out all the options at the LP Shed Gallery, where you’ll also see details on the materials used. Inspired by the seemingly endless possibilities, you’ll emerge motivated to create a shed you’ll be proud to show off!
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.

So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
Any person interested in the field of woodworking will tell you how much time and effort it goes into building a wood project. And even after putting in so much effort, the chances of mistakes and failures are pretty high. So much so, that after a time you will feel like giving up altogether. Most people spend a lot of time and money on their first shed project and often end up frustrated because what they finally create is nothing like they wanted to. Why? The measurements were all screwed up! If that sounds like your story, it is finally going to change.  With Ryan’s collection of shed plans in your arsenal, you will never ever have to look for shed plans anywhere else.
As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.

Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.

Our free shed plans offer a solid introduction to shed construction and building technique, and they include a full materials list to help get you started. The instructions provided are basic, but if you have existing experience with construction, then they may well suffice to help you build your shed without having to spend money. Our premium shed plans are on another level, however. They include detailed, step-by-step instructions and they walk you through the entire shed building process. We also include professional-grade tips on select pages to help you as best we can – it’s like having an expert right next to you every step of the way. All the techniques you will learn from reading our premium shed plans are transferrable too, and they can help even the most seasoned builders perfect their skills. Therefore, we recommend premium shed plans to anybody who is serious about building their own shed, with our free shed plans best-suited as a taster for those interested. Hopefully, you’ve now understood that here at 3DSHEDPLANS™ we do not promote or employ any marketing gimmicks. Download our FREE shed plans and see it for yourself. Don't forget to SUBSCRIBE to our newsletter to get special deals, offers and discounts!
Very nice project. Seems to be well built. When I built mine we went with a full basement and made it tall enough for a 4 ft. attic as well. We maximized our footprint in storage capacity. Electricity in the shed was also a must with its own breaker panel. We needed the space because I even have stuff to fix stuff and there is no such thing as a bad piece of junk.
My Shed Plans by Ryan Henderson is a comprehensive collection of over 12,000 easy to follow, step-by-step Shed and Woodworking Plans. Plus, you are getting an additional 400 Woodworking Plans. What I don’t like about My Shed Plans is I will never ever build a fraction of these Amazing Shed Plans. There is just too many Shed Plans for a weekend warrior like myself.

To make it easier for you, the “do-it-yourself” storage shed kits are for sale partially prefabricated to make the assembly of the shed barn kit simple and straightforward. The DIY storage shed kit walls are assembled and the rafters are prebuilt and ready to put into place. While we offer large shed kits as well as small barn kits, on the smaller 6′ and 8′ shed kits, the floor may be partially constructed to make the job even easier.
A garden shed can be strictly functional, but it can also be a decorative focal point around which you design your garden or yard. These plans will help you build a basic shed, but don’t stop there! To customize your shed, you could create a combination toolshed and greenhouse, put a martin house on top, or use part of the shed for a chicken coop or rabbit hutch. If you’re feeling even more adventurous, you could create a living roof of moss or succulent plants.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
×