Does this all sound very promising and great, but you still have your doubts about not being certain how to build a shed and if you are brave enough to buy the shed blueprints? We can help here as well with our newest book How to build a tiny house. This step by step guide with illustration and photographs provides useful information and in-depth instructions regarding every area of timber frame construction and its foundations, walls, roof and floor. You can order it anytime on our website, in a print version or as ebook.
The plans are pirated copies, some from "mycabinandsheds.com" as well as scanned 100 year old books . They are basic plans of very limited value. I clicked on a link from a "Kim Komando" email and saw the add for 12000 plans and I figured it was a trusted advertiser. Come to find out after contacting Komando that there are 3rd party advertisers she would take no credit for endorsing. I should have done more research before I paid for anything but after finding out it is a scam I called the 1-800-390-6035 click bank number and they gave me a refund with no arguing at all.
The roof trusses support the plywood and shingles that make the roof waterproof.  They are very important to plan carefully because they require strange angles and they have to fit the structure below them.  We gave our shed a slight awning and this had to be accompanied by the trusses, which overhang the walls of the shed by about a foot on each side.  When constructing your joists it is important to use joist plates otherwise the angles that you so carefully planned will not remain true for very long.  We used a 2x4 to support the joists while we were attaching them to the walls.
As we have seen there are numerous design which you may use to build yourself a shed of your choice. The truth is there are numerous shed designs which come up every year which we cannot discuss details but only mention them. These examples of sheds include attached firewood storage, Ivy, Windows, Double door, Decorative door, Porch, Shutters, End entry side entry and many others.
Figure G shows details for the marking jig. Photo 12 shows how to use this setup to draw the curves for the window pieces. Next cut the side pieces (Figure F). Set the side pieces in place over the top of the header and mark the angled cuts (Photo 13). Finish the curved trim piece by first cutting the angles on each end, and then sawing the curves with a jigsaw and sanding them smooth. Use the marking jig to lay out the curved brace, too (Figure G).
• Stagnant waters — As much as the wood is coated to protect it from water, it would still be advisable to keep the wood away from stagnant waters. This is as the wood coating is not a permanent coat and so is the wood is exposed to water it will get damaged over time. The best way to avoid water paddles near the shed is building gutter systems on its roof which directs the water to a tank or a pool.

Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
Staining: There are two types of staining. These can either be natural where the stains are purposed to enhance the beauty of the wood or unnatural means which involve activities like painting the wood. In natural means, one has to keep maintaining it frequently as they last for approximately two years while unnatural means last as long as up to eight years without needing any maintenance.
Stand the back wall. Then align the corner of the side and back walls and nail them together. With a helper on the outside of the shed to push if necessary, line up the inside edge of the bottom plate with the chalk line and nail it to the platform. Continue around the building, standing the opposite end wall and finally the front wall. Nail the corners together, making sure that the top plates of adjoining walls are flush with each other.
Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.

DIY Shed Plans

×