As you can see, I have no pictures of the doors being created. This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times. Lesson to be learned: leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later. After 3 attempts, we finnally got the doors to work properly. The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.
Woodworking is a creative pursuit. That’s why it should be fun and enjoyable. If you feel intimidated about taking up woodworking projects, even when you love working with wood, the problem lay not in you but in the woodworking plans you are following. Among all the woodworking projects, people find making outdoor sheds complex and hard to execute. But, that should not be the case. In fact, if the blueprint and the shed plan is good, is explained in detail with step by step instructions, making outdoor sheds should be a breeze.
Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.
After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.