If you are looking for the best collection of outdoor shed plans, then look no further. ‘My Shed Plans’ by Ryan Henderson’ is perhaps among the best collection of shed plans you can find anywhere today. It is a collection of around 12,000 woodworking plans which are designed to cater to the needs of both professional and amateur woodworkers. With over 20 years of experience in shed building, Ryan is an authority in the field. His plans are explained well with step by step instructions. If you follow his shed plans and instructions properly, you will be able to build one with ease. It doesn’t matter if your woodworking skills are basic or if you have failed in making a shed before, by following his shed plans you can undertake any such project with confidence.
The roof truss can be built using 2x4 or 2x6 lumbers. There are different ways to build the truss, the most common is cutting out the rafters and assembling them using gussets. The easiest way to build the roof truss will be using plans. The other option will be to lay the 2x4’s or 2x6’s on the level floor set them how you want your roof and make a template. Once you are happy with the look of your template you can build the rest.
If you decide that you don’t want the second package after purchasing the first package, you will be offered a third package which is even more explicit that contains tonnes and tonnes of woodworking plans that are laid over thousands of pages. All these eBooks are neatly organized, very much real and indeed the amount of plans that they contain might even come out as nauseating, if you’re someone who doesn’t have so much of patience to go through all of them.
Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
Finding MyShedPlans seemed too good to be true; 12k shed plans, 3-D renderings, detailed material lists, but wait, there's more! Hundreds of useful guides, woodworking books, and project ideas ranging from birdhouses to bridges. And what was more, was the promise of an easy download and immediate access to boundless amounts of material so I could be right on my way to a sharp new shed.
Additional options include ready-built sheds that are shipped completely assembled. Find out if these will need to be finished, sanded, and painted or stained. Prefab and already-built sheds are an attractive concept but investigate shipping costs. Consider feasibility and logistically how you'll manage the project. Some sheds are delivered by a truck equipped with a crane. Will the crane be able to drive on your property and deliver the building without tearing down walls or fences or plowing over a lawn or garden?

Now we can actually start building!  Before you start putting down cinderblocks, lay limestone screening down in all of the channels and run and burry your electrical.  Make sure that your electrical wires are clearly marked (we used caution tape) so that nobody digs them up accidentally in the future.  Once your all set, you can start putting down some cinderblocks.  You may need to break some cinderblocks in half, and this is easily done with a chisel, a hammer, and a bit of time.  Tip:  Set Rebar posts in each corner and tie strings across to help you keep the walls straight.  You need to check every single block for level, especially on this layer as the base of the foundation will affect the rest of the foundation and in turn affect the main structure.

We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
Copyright © 2019. All Rights Reserved. 3DSHEDPLANS™ is officially registered and protected trademark in the United States. Owned & operated by Netholics Media, LLC. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission or any other requests, please get in touch with us using the contact form provided. Use of this website constitutes acceptance of the 3DSHEDPLANS.COM’s User Terms and Privacy policy.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.

Before you exert effort in finding the woodworking company with the best shed plans, it is very important that you determine first the right type of shed that will suit your purpose. Now, aside from the purpose, there are other things to consider like the area where to put the shed (shed plans 12×16), the things that you will store in the shed, the appropriate building materials to use, the kind of environment or the weather in your place, and of course, safety issues. Will the shed be also used for the family’s recreational activities, or for workshops and meetings, or for some business ventures? Purchase shed plans because they can help in answering some of our important questions about this matter.

Build the framework for the back wall. Make the top and bottom beams (a.k.a. the plates) the same length as the length of the floor which they sit. To keep your measurements simple, make the spacing between the vertical studs identical to the spacing between your floor joists. Note that the back wall should be lower than the front wall so that the roof slopes and directs rain away from the door.[6]
Listen, about the My Shed Plans Scam… all you can say is haters are gonna hate. There are way too many people on the web going about trying to ruin things for others. It probably makes them feel bigger than the basement of their parents’ house allows. In regards to your My Shed Plans product, it looks like a great deal. 12,000 shed plans, all in one package? Seriously, is there any plan that’s missing?

We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
Ryan Henderson seems pretty straightforward and confident about his product. There are no outrageous claims that have been made, like building a shed in 15 minutes, and all the expectations on the website are pretty realistic. You won’t feel the need to question the product, as the website is very detailed, making it seem like they only want their consumers to be well-educated on the sheds they decide to make.
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.

Because My Shed Plans does not promise anything beyond belief, the product’s foundation is pretty strong. People have enjoyed choosing between the collections of shed layouts and building it themselves. It’s a great activity for the whole family, since it’s all well planned out. It can be a bonding experience, the way a team building exercise at work is.


For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.
Proceeding with your shed requires smart planning. For starters, you may need a permit from your local zoning authority and/or homeowners’ association to build a new structure on your property; check with the proper authorities before you even invest in the materials. Plus, there may be rules that dictate how you may use your shed, or whether you’re allowed to wire it for electricity. Once you get the go-ahead to build, you’ll want reliable guidelines. For anyone inclined to DIY rather than buy a prebuilt shed, look over a selection of free LP Outdoor Building Solutions plans based on your choice of size and roof style. Each set of plans comes with extensive material and hardware lists, detailed construction information, and tried-and-true building tips.
I just want to let you know that your Driver was a pleasure to deal with. He placed the shed perfectly into a tight spot and then took the time to make sure it was level and sitting properly. I feel any other company would of placed it as close as possible to where i wanted it and would of been on their way. He also noticed (I would of never noticed) that the door didn't line up perfectly when closed and made some adjustments.
Whether you build your own trusses or order them from the lumberyard, building a roof with trusses is much easier than framing a roof one rafter at a time. As a general rule when learning how to build a shed roof, you’ll need one truss every 2 ft. If you build your own, the cost will be about half this amount. Connect the framing for site-built trusses with plywood gussets glued and screwed to the joints.
• Use of crooked studs — while building the shed, one would build a shed with crooked studs which may render the shed unstable. It is advisable that as one is building a shed to ensure that all the studs used are straight and uncompromised. That will ensure that the body frame of the shed remains strong enough to hold its own weight and be durable enough for a long time.
Now we can actually start building!  Before you start putting down cinderblocks, lay limestone screening down in all of the channels and run and burry your electrical.  Make sure that your electrical wires are clearly marked (we used caution tape) so that nobody digs them up accidentally in the future.  Once your all set, you can start putting down some cinderblocks.  You may need to break some cinderblocks in half, and this is easily done with a chisel, a hammer, and a bit of time.  Tip:  Set Rebar posts in each corner and tie strings across to help you keep the walls straight.  You need to check every single block for level, especially on this layer as the base of the foundation will affect the rest of the foundation and in turn affect the main structure.
I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).
I have recently purchased a house with an older roof that needs to be restored soon. So, I am trying to decide on I should go with a metal roof other than shingles. If I install metal roofing over solid decking such as OSB or plywood, integrate with a properly insulated garret, there is very little noise difference compared to standard asphalt shingles. I have briefly read benefits and drawbacks of Metal roofing but as I listed before I should go to metal roofing and hiring a roofing contractor no matter its expensive or noisy anyhow, Your article has cleared a lot of misinterpretation I’ve had before.
Structurally speaking, some sheds are actually miniature versions of houses or barns. The gambrel storage shed plans from mybackyardplans explain the basic steps of such a project. First, the foundation is built. Then the sidewalls are installed, after that comes the roof frame, the front wall and the door, then the back wall and roof decking, the trim and finally the shingles. At the very end, the shed is painted.
• Failure to account for climate — some people build sheds without considering the weather patterns experienced in the area. The shed ends up being exposed to harsh climatic conditions, continued exposure of the shed to such adverse climatic conditions lead to its destruction. This then leads to one spending much more money to repair the shed. The most common way in which people fail to protect their sheds from is rainwater and snow by failing to have the necessary protecting tools such as gutters and drainage trenches. Gutters are important as they direct rainwater away from the shed hence protecting the shed from getting destructed by rainwater and melting snow that is on the roof. Drainage trenches direct the water that falls directly to the ground away from the shed. These methods keep the wood used to build the sheds dry and hence they do not absorb moisture that may encourage the growth of fungi on the wood. As we have seen earlier, it is also important to coat the wood with protective coats as paint to prevent them from coming into any contact with moisture.

Also square the frame by making sure diagonal measurements from opposite corners are equal. Then tack one corner to hold it square. Finally, nail the soffit to the roof frame with 6d galvanized box nails. We used 12-in.-wide fiber cement siding for soffit material. Mount an inexpensive carbide blade on your circular saw to cut the fiber cement. Set the roof panel aside and build the other half of the roof using the same techniques.
If you are looking for the best collection of outdoor shed plans, then look no further. ‘My Shed Plans’ by Ryan Henderson’ is perhaps among the best collection of shed plans you can find anywhere today. It is a collection of around 12,000 woodworking plans which are designed to cater to the needs of both professional and amateur woodworkers. With over 20 years of experience in shed building, Ryan is an authority in the field. His plans are explained well with step by step instructions. If you follow his shed plans and instructions properly, you will be able to build one with ease. It doesn’t matter if your woodworking skills are basic or if you have failed in making a shed before, by following his shed plans you can undertake any such project with confidence.

Ryan had a difficult time building his own first shed. Wrong material, wrong measures, wrong techniques, all of them didn’t help in making the shed any quicker. It took him 6 months to complete his first shed project, and at the end of it he was worn out and exhausted. Even after spending a lot of time reading and purchasing woodworking books, blueprints, nothing seemed to work. Most of the shed plans he bought lacked vital information which left him with more questions than answers. That is when he decided to leave it all aside and build his own shed plans. That was the beginning of his work towards building his master collection of shed plans.

The front wall has a 6-foot-long top plate and two 1-foot-long bottom plates, leaving space for a 4-foot-wide door. The four wall studs are 81 1/4 inches long; install them as shown in the front framing detail at left. Next, install the 73-inch-long jack studs, and then attach the 51-inch-long doubled header. Finally, attach the 6 1/4-inch-long cripple studs.
The program consists of a wide range of downloadable files, which contain many different step by step instructions and plans related to woodworking. These tutorials are focused on a wide range of projects, such as potting shed plans, wood shed plans, storage shed plans, garage storage plans, house plans and more. All the shed plans discussed in this program are divided on the basis of each project type. 

best shed plans

×