First off, building your own shed through our free or PREMIUM shed plans means you are saving the cost of a professional. If you are wondering you have zero experience in wood working then you shouldn’t be worried; our plans come with precise instructions, material list, diagrams, instructions, etc. There would be absolutely nothing that would leave you wondering.
Nothing dresses up a shed like brackets. They’re the ultimate low-effort, high-impact feature. In some cases they also provide extra support for your gable-end overhang. Depending on the design, you can build brackets from 4x4s or by laminating 2-by boards. Make a full-scale drawing to work out the details. Then build the brackets and attach them to the shed. Install the brackets tight to the underside of the overhang, and then notch the fascia board to fit over them.
Victoria, Australia-based Archiblox designs and makes sustainable, prefabricated modular residential and commercial projects. This simple, straightforward, and modern structure can be used as a studio, office, guest house, or pretty much whatever you desire. Modules can be grouped together for larger spaces and are designed to subtly echo the geometrical arrangement seen in nature.
As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.

• Improper geographical placement — this is one of the huge mistakes one may make while shed building. It may be too close to your house hence obstructing your beautiful view from your living room or your kitchen as you are cooking. The last thing one would want is not like your house because of a simple thing as a view, so be careful with where you place your shed. One may also build the shed too far away from their house which again is an inconvenience. Who would want to walk from your house to your shed to get some tool you need and you have to trek some long distance? You may also need your shed someplace you can see due to the security reasons. You would want some stupid thief taking your stuff without you see them, would you? Or walking down a snowy lane during a chilly night just so you could get something from your shed. Before building your shed consider all the factors whether positive or negative and then come up with the place in your compound with the most advantages compared to disadvantages.
Backyard Shed Plans Barn Shed Plans Chicken Coop Plans Compost bin Plans Corner Shed Plans Detached Garage Plans Dormer Shed Plans Firewood Shed Plans Garage Shed Plans Garden Shed Plans Generator Shed Plans Greenhouse Shed Plans Hip Roof Shed Plans Horse Barn Plans Large Shed Plans Lean To Shed Plans Loft Shed Plans Low Income Housing Plans Metric Garden Sheds Modern Shed Plans Porch Shed Plans Run In Shed Plans Saltbox Shed Plans Short Shed Plans
· Firewood storage sheds — mainly used to store firewood from elements of weather such as rainfall that may destroy them. The most common type of firewood shed is the lean on shed. It is also the most suitable as it allows free circulation of air, therefore, preventing dampness of the firewood. It is also near the house so the firewood is stored near your house and may access anytime you need them.

Made from durable blow molded resin, this Alpine shed from Suncast comes complete with 14 windows with delightful contrast trim. The double doors are built with articulating metal hardware so they’re robust and durable. The floor is reinforced for the ultimate sturdy foundation. Extra roof support is provided by the metal trusses and ridge beaming. This shed is perfect when you’re looking for something that is built tough, and stands out beyond the more flimsy and cheap designs that you find on the market. It is large enough to stow everything that you need and keep all items clean, safe, and secure. The outer appearance of this shed makes it perfect for those who want an attractive external design that doesn’t stick out like a sore thumb in your yard. All in all, customer reviews across the board are quite positive for this shed, and it makes a great addition to anyone’s home.
· Tool storage shed — they are used to store the tools that a homeowner may need to maintain their home compounds. They may be installed with ramps at their entrance to make it easier for storage of heavy items. They are also conducive for storage of bicycles and yard tools. Your compound, therefore, looks neat as the untidy yard tools are kept indoors.
· Personal belongings storage shed — as you are growing older each and every day, you may tend to accumulate so many items that congest your house. You may not want to throw or give away any of the items accumulated as they probably hold a sentimental value to you. The best way in which you can solve a headache is by building yourself a shed which you can be storing your personal items as you continue accumulating them.
Don’t assume that you’re missing something if you have a question that cannot be answered within the guidelines of the shed plans. Builders at all levels will always have questions and it is better to ask the question than miss something important in the process. Go online and find a forum or a video if you have a question. Better yet, read all the little print that you skipped over in your shed plan and see if the answer is there, it might be.
The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot. 

The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.


Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.


There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
With that kind of quantity, there are indeed a lot of good designs that you can find in this pack. However, the absurd amount of content is abundant for all level of woodworkers. The drawings are exclusively technical with the bonus materials which make the package, a lifetime one. The designs in this package are brainstorming. As an amateur carpenter, I’m starting from a point where I haven’t taught of building design; I came a long way and half of the credit goes to Ryan Shed Plans. The shed plans provided here are very original and indeed are fun to build if you can combine a lot of plans into one.​
This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.
A few decorative touches can help your shed fit in with the architecture of your home and even convey how you use it. Some folks like to dress things up with a front porch, dormer, or gable, but simply adding barn-style doors, shuttered windows, and a bit of gingerbread trim can make all the difference. Color, of course, goes a long way too. Check out all the options at the LP Shed Gallery, where you’ll also see details on the materials used. Inspired by the seemingly endless possibilities, you’ll emerge motivated to create a shed you’ll be proud to show off!
Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.

I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.

This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.
The Shed plans are indeed helpful, and the product is entirely promising if you are looking forward to building a single shed in your home. It is entirely different from the other havoc packages that we usually see online and therefore it is not a bad package. The product offers double a number of resources if not the designs exactly, given the content and as long as you are buying it, you will receive many e-books and also additional materials.

Garden Sheds are the most common type of sheds that you find in every backyard. Right from the typical Colorbond Shed to the charming mini building adjoined shed that is made of both timber and steel, they bring beauty to the build. Garden Buildings are basically must because most of the houses tend to be beautiful with these. They are incredibly beautiful, authentic and useful for everyone for some or other purpose. Therefore, the Ryan Shed Plans contain some of the very feasible Garden Shed plans from which you can pick a design that seems suitable to you.

3 The frame of the roof consists of four 2-by-4 rafters cut so that they rest on the front- and rear-wall top plates, as shown in the rafter detail at right. Install a gable stud directly over the center studs on both side walls to fit between the end rafter and the top plate. Install the sub-fascia and then the fascia to the front ends of the rafters.
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.
Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.
You will, however, need to follow the approved plans and details without making changes. Also, a basic site plan that shows the outline of your property, house, and proposed shed location will need to be submitted, along with the plans. Be sure to indicate all existing structures (pool, fences, retaining walls, etc.) on the site plan. Forms are usually available for completing the site plans. Two sets of plans are typically required, for the approval process.
Sheds are once in a while additionally re-recolored or varnished now and again for stylish and wood assurance reasons. Fire and, in a few areas, termite assault, are likewise potential issues. The damage to wooden sheds can be prevented by applying preservatives when they are exposed to rain, UV light, harsh climate, fungal attacks, insects etc. If you add oil or stain, the wood shed can be made to stand out in the garden given the style it can even blend with the surroundings. Some prominent type of woods like Cedar is resistant to water damage, naturally.

Listen, about the My Shed Plans Scam… all you can say is haters are gonna hate. There are way too many people on the web going about trying to ruin things for others. It probably makes them feel bigger than the basement of their parents’ house allows. In regards to your My Shed Plans product, it looks like a great deal. 12,000 shed plans, all in one package? Seriously, is there any plan that’s missing?
Do not make the mistake of not building your own shed because you have never done it before. With the right shed plans you will get the same results the experts get. Begin by choosing plans you feel comfortable with and know you can follow along. Simply follow the steps provided, measure correctly, and in no time you will construct your own shed. Study the building guide to get familiar with all the steps and to get to know the names of all the parts.
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.
×