It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
Ø Clay tiled sheds — as the name suggests, these are sheds that their roofs consist of clay tiles. The clay tiles make the wooden sheds look visually appealing. Nevertheless, one has to plan for the clay tiles from the foundation of the shed so that it can support the roof due to the bulkiness of the roof. The wooden walls need to be strong enough to support the roof. It would be advisable to hire an expert to install the clay tiled roof to avoid complications.
I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.

A shed is a simple roofed single floor structure that is used for storage of garden tools, shelter domestic animals, performing out hobbies and also as a workshop. They can also be referred to as outhouse, outbuilding or shack. They are mostly situated in the back garden. Sheds vary in their sizes from large sheds to small sheds depending on their purposes. Storage sheds are mostly small in size but industrial and farm sheds are mostly large depending on the volume of the goods they hold. Sheds can be built from different materials like wood, metals, and plastic. The types of shed construction include metal sheathing, plastic sheathing, and complete wood construction.


Well, not these plans. You have the option of building a very functional and spacious lean-to shed on different foundations. Your foundation choices are a concrete slab, a wooden floor supported by concrete piers, or a wooden floor supported by skids. That lost option also means that your lean-to could be mobile as well so you won’t have to decide where you want to permanently put it.
There are many ways and methods of beginning a foundation for your shed, but so as to keep this manual simple we will begin by looking at the procedures followed while building a shed. The types of the foundation include a concrete slab foundation, a sunken pillar, and wood skid. The e-book is helpful to those who might not be interested in shed building from the scratch. It takes time to explain in detail the materials required and the step by step methods required to give one the moral to build the shed. It also explains the easy steps in a very fun way. Furthermore, the process of building your shed on your own is quite a fun task as one watches the shed start from nothing to something beautiful and useful. Isn’t that exciting? At least one feels useful after performing such type of a task that feels to be quite a huge burden. The following steps are derived from the e-book on steps used to build a foundation:
Figure G shows details for the marking jig. Photo 12 shows how to use this setup to draw the curves for the window pieces. Next cut the side pieces (Figure F). Set the side pieces in place over the top of the header and mark the angled cuts (Photo 13). Finish the curved trim piece by first cutting the angles on each end, and then sawing the curves with a jigsaw and sanding them smooth. Use the marking jig to lay out the curved brace, too (Figure G).
Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up. However, if this is not possible with the design you’ve chosen, simply nail them downwards through the plywood and joists or toenail them into place by driving the nails downwards and at an angle. Note that you will probably need other people to help you hold the wall structures up until they can be attached to one another.[9]
Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996.
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up. However, if this is not possible with the design you’ve chosen, simply nail them downwards through the plywood and joists or toenail them into place by driving the nails downwards and at an angle. Note that you will probably need other people to help you hold the wall structures up until they can be attached to one another.[9]
BBB Business Profiles are provided solely to assist you in exercising your own best judgment. BBB asks third parties who publish complaints, reviews and/or responses on this website to affirm that the information provided is accurate. However, BBB does not verify the accuracy of information provided by third parties, and does not guarantee the accuracy of any information in Business Profiles.

You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.
My Shed Plans is the perfect package for those who do not have an ounce of knowledge regarding shed building. You will benefit from the step-by-step directions, colored illustrations, section details and the woodworking course. All techniques and tricks will be taught to you, so you’ll definitely learn a lot about building your own sheds. If you do have some natural creative ability and some skill, the sheds should turn out fine.
Proceeding with your shed requires smart planning. For starters, you may need a permit from your local zoning authority and/or homeowners’ association to build a new structure on your property; check with the proper authorities before you even invest in the materials. Plus, there may be rules that dictate how you may use your shed, or whether you’re allowed to wire it for electricity. Once you get the go-ahead to build, you’ll want reliable guidelines. For anyone inclined to DIY rather than buy a prebuilt shed, look over a selection of free LP Outdoor Building Solutions plans based on your choice of size and roof style. Each set of plans comes with extensive material and hardware lists, detailed construction information, and tried-and-true building tips.
I have 3D shed models for all most all of these shed plans.  Use these models to walk inside or around your shed while you are building to see all the details in virtual reality to make your shed building project easier.  You can even use your smartphone, laptop, virtual reality goggles with the augmented reality feature to see what your shed will look like in your back yard.
A Place to Grow recycles greenhouses to create she sheds, wine rooms, art studios, and meditation retreats. For a client in Los Osos, California, a shed is used as a sewing room and private escape. When designing studios and hobby sheds, allow room for shelving, storage, and workspace. Naturally, the space will need to be wired for proper lighting.
The shed we built rests on a foundation made up of 12 solid-concrete blocks. The 4 x 8 x 16-in. blocks are arranged in three rows spaced 59 in. apart. These blocks are typically set directly on the ground, but we put down a 4-in. bed of gravel first because our site occasionally receives groundwater. The gravel will keep the soil beneath the shed from eroding or becoming soggy.
When you nail on the siding, make sure it overhangs the framing on each side by 3-1/2 in. and that you’ve trimmed off the top corner to follow the slope of the angled top plate (Photo 2). Attach the siding with 2-in. galvanized or stainless steel ring-shank siding nails placed 8 in. apart along studs and 6 in. apart along the edges of the sheets. You’ll have to nail blocking between the studs to support the top edge of the siding and the Z-flashing.
· Tool storage shed — they are used to store the tools that a homeowner may need to maintain their home compounds. They may be installed with ramps at their entrance to make it easier for storage of heavy items. They are also conducive for storage of bicycles and yard tools. Your compound, therefore, looks neat as the untidy yard tools are kept indoors.
Once you’ve figured out what you need the shed for, it’s easy to go forward with planning. Keep in mind that sheds, no matter how small in their size, are not exactly the best projects for beginner woodworkers. Sheds are one of the most complex woodworking items to build. Some bigger sheds resemble houses so it’s not a surprise a shed is a project for a skillful hand.
×