When you have around 12,000 plans that are claimed to be shed designs, not all of them can be good. Some of them are predominant, some of them are mediocre while some of them are utterly absurd and are even hard to read. There are even incomplete plans in the Ryan Shed Plans package, and many of these plans don’t include the materials, making it frustrating. The download pages of most of the designs in Ryan Shed Plans are not organized.
Can I tell you a secret? I don’t think I would ever do this again because I have another secret. Shhh, don’t tell, but DIY projects that are a joint effort between my hubby and myself really aren’t fun. They are stressful, and hard and take a toll on us. Which may seem strange in a way because we are both handy and we both enjoy these type of projects and we even have a pretty good idea as to what we are doing. Actually, I think we really have it together – separately! Once you throw the two of us together is gets a little intense. Enough about that, let’s get on to the project.
We now need to create a base that we can nail the frames for the walls into. We did this with four 2x8's and some bent i-bolts along with a lot of mortar. The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar. Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in. The frames can now be solidly attached to the base with the framing hammer.
As you can see, I have no pictures of the doors being created. This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times. Lesson to be learned: leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later. After 3 attempts, we finnally got the doors to work properly. The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.
The next section of the guide that I will take you through is the best ways and designs one may use to build an ideal shed according to one’s desires. We all have different tastes, so it is important to go through some of the designs used so that one may pick the design that suits you better. I will discuss the different best sheds designs and their benefits.
If you buy heavy galvanized hardware designed for farm buildings for your shed, it’s overkill. Buy heavy-duty closet door hardware instead. It’s not really meant for outdoor use, but when it’s protected by an overhang, it holds up well. And if the roller bearings get corroded, it’s simple to replace the entire hanger mechanism. Check out Johnson Hardware’s 111 track and 1025 ball-bearing hangers.
Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.