Before you start building your shed, there are a few things you might want to clear out first. For instance, does your town require you to obtain a building permit? Where do you want to build the shed? Is building a shed allowed on your property? Listing down the equipment, furniture, fixtures and goods to be stored in the shed, as this will determine what type of shed you need. What should be the size of the shed? There are practically lots of areas that you need work on before starting with the building phase. The following breakdown will help you get through this phase:
My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer.
When choosing where to build your shed, choose a flat dry spot on your property. This will make it easier to excavate and level it out, and ensure that you build on a dry surface. Avoid building your shed in a low lying area that is prone to water collection or you’ll find your shed flooded after a big rain. Too much water means rotting wood, blistering paint and rusty hinges and none of that will highlight how hard you worked to build this shed.
I felt that this is a very poorly setup web site. I purchased the Ryan’s shed plans online, did not receive an emailed receipt or link to the web site that worked. Phoned Clikbank and they promised to send another receipt. They did not. I had saved the original online confirmation with the links to the site. When I clicked on these it said the files couldn’t be found.
Whether you build your own trusses or order them from the lumberyard, building a roof with trusses is much easier than framing a roof one rafter at a time. As a general rule when learning how to build a shed roof, you’ll need one truss every 2 ft. If you build your own, the cost will be about half this amount. Connect the framing for site-built trusses with plywood gussets glued and screwed to the joints.
The best spot for a shed is level, well-drained ground close to where you work in your garden or yard. The location doesn’t need to be perfectly flat; the foundation design shown in the plans allows for adjustments to make the floor level. Small sheds require only a top-of-soil foundation, even in locations with freezing winter temperatures. Precast concrete deck blocks work perfectly for this.