You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.

If you buy heavy galvanized hardware designed for farm buildings for your shed, it’s overkill. Buy heavy-duty closet door hardware instead. It’s not really meant for outdoor use, but when it’s protected by an overhang, it holds up well. And if the roller bearings get corroded, it’s simple to replace the entire hanger mechanism. Check out Johnson Hardware’s 111 track and 1025 ball-bearing hangers.
It isn’t a requirement that this shed be built against a wall—but the structure is designed to take advantage of the wall for strength. So if you modify it to be a freestanding shed, you’ll need to build a conventional stud wall across the back and face it with the same type of plywood siding used on the rest of the shed. For information on how to mark, cut, and fasten wall studs, see How to Frame an Interior Wall (ignore the part about working with drywall because you’ll be using exterior-rated T1-11 siding instead).
You will find that the shed blueprints are mostly just that. These are not step-by-step instructional material like you might think. Instead, they are merely design drawings. They include a variety of views, (plan, elevation, perspective), and a description. Sometimes you’ll get a materials list. And while there are admittedly a few that give full instructions, most of them are just shed designs and plans. But because they’re from different sources, some of them are the wrong way round.
Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.

shed plans reviews