Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.

The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.


The roof truss can be built using 2x4 or 2x6 lumbers. There are different ways to build the truss, the most common is cutting out the rafters and assembling them using gussets. The easiest way to build the roof truss will be using plans. The other option will be to lay the 2x4’s or 2x6’s on the level floor set them how you want your roof and make a template. Once you are happy with the look of your template you can build the rest.
As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.

· Gambrel styled shed — it is a very common type of shed. Its roof is highly steep and is four sided. This type of shed at some point resembles a hexagon. This type of shed is preferred as the shape of its roof makes the interior of the shed to be spacious hence creating more space where a lot of garden and outdoor tools can be stored. In this type of shed, one may have a workshop in the shed. They can even accommodate a car due to their large spaces.
When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right? 

· Firewood storage sheds — mainly used to store firewood from elements of weather such as rainfall that may destroy them. The most common type of firewood shed is the lean on shed. It is also the most suitable as it allows free circulation of air, therefore, preventing dampness of the firewood. It is also near the house so the firewood is stored near your house and may access anytime you need them.

When you start to look at the plans, you realize some are absurdly out of date, or impossible to read because they are blurred - just like everyone else has reported on this site. What was even more appalling was it appeared most, if not all of what I had purchased, was easily available for free online. Some material looked as though it may have been pilfered - or "borrowed without permission or attribution from educational sites. And much of the "VIP-Premium" content was past its copyright - which is great if you want a children's woodworking book from the 1800's for historical purposes, which I'm sure is a fascinating read, but all that was ultimately meaningless since the sum total of what I downloaded offered nothing of any immediate benefit toward building a shed from a quality, step-by-step plan, with 3-D renderings, Material lists, and best practices, etc to help you build quickly, efficiently, and have something you can use and be proud of. I think the only proprietary plans must the the freebie they give away to entice you to pony up.
Ambitious recyclers build sheds from existing materials, like doors, reclaimed lumber, windows, and the ever-popular crates. If you are on a tight budget but really want a shed, research the DIY projects featured on social media, in books, and home and garden websites like The Spruce. Whatever you decide, try to follow through with the project. You don't need the added stress of a half-finished shed every time you walk out your back door.

For the shed's floor deck, use ¾-in. exterior-grade plywood; anything thinner will flex between joists. (Note that a double layer of ½-in. exterior ply is okay, too.) If you plan to store heavy items, such as a lawn tractor or woodworking machines, consider using ¾-in. tongue-and-groove plywood. This costs slightly more, and is a bit more troublesome to install, but its edges lock tightly together, creating a rock-solid, rigid floor. In areas with excessively high moisture and large numbers of wood-boring bugs--such as Florida, Alabama and the other Gulf Coast states--consider using pressure-treated plywood for the floor deck. It's particularly resistant to moisture and insects.
Ryan had a difficult time building his own first shed. Wrong material, wrong measures, wrong techniques, all of them didn’t help in making the shed any quicker. It took him 6 months to complete his first shed project, and at the end of it he was worn out and exhausted. Even after spending a lot of time reading and purchasing woodworking books, blueprints, nothing seemed to work. Most of the shed plans he bought lacked vital information which left him with more questions than answers. That is when he decided to leave it all aside and build his own shed plans. That was the beginning of his work towards building his master collection of shed plans.
BBB Business Profiles are provided solely to assist you in exercising your own best judgment. BBB asks third parties who publish complaints, reviews and/or responses on this website to affirm that the information provided is accurate. However, BBB does not verify the accuracy of information provided by third parties, and does not guarantee the accuracy of any information in Business Profiles.
Now, imagine a price you think you might have to pay for such a comprehensive package – sure you will think not less than a few hundred at least. The good news is that Ryan is offering all of it at an unbelievable price of just $37. I am sure you were quite blown away when you heard about the quantity and quality of the shed plans and the bonuses you would be getting with them. So, doesn’t $37 for so many useful resources on woodworking sounds like a great idea. In my opinion, surely it is. Once, you have this collection in your arsenal, you are never going to run out of ideas. That is assured.
My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer.
At times, this information may seem overwhelming. You need to consider buying a program that provides you with all the information in a simple and concise manner. It is important to understand the value of your effort, money and time. One of the most common and biggest problems with online tutorials and guides is that they give just a glimpse of what you are buying. Thus, you don’t have a clear idea of what you are getting into.
There are several ways to economize when building a shed: Install three-tab roof shingles instead of architectural shingles, or use grooved-plywood siding in place of cedar bevel siding. But don't ever skimp on the building materials used for the floor frame or plywood floor deck. I can't tell you how often I've walked into a shed and found the floor to be dangerously spongy. One building in particular had a floor so badly rotted it felt like one of those inflatable moonwalk attractions you see at carnivals.
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.
Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996.
When elaborating the shed plans, take into consideration the purpose that the shed will serve. This will help you determine the suitable dimensions as well as the structure of the interior. Keep in mind that you’ll most likely want to have some shelves and a table inside the shed so you need to add these to the list of materials. You also need to take into account the tools you’ll need for the project so you can plan accordingly. You’ll probably need a saw, a drill, a shovel and a few other basic things. As far as the materials go, it all depends on the type of shed you want to build. On instructables you can find detailed instructions and lists which teach you how to built a cute shed just like this one.
The plans I purchased were not as described in the web advertising. In additon, I also purchased some addons/upgrades and was supposed to receive a link in a separate email to download these 'extras'. I never received the email with the link. I have contacted them twice thru their customer service support from and the following popup appears after you submit your request: YOUR TICKET HAS BEEN SENT Do allow up to 2 days for a reply from our support team. Do note that our helpdesk is closed on weekends. Tickets submitted during this time will be answered on Monday. I have not received any response from them nor has my purchase price been refunded as was promised in their ad - see below: P.S - Remember...you have my 100% Risk Free 60 Days Money-Back Guarantee - you can still keep any bonuses as my gift - if the product is not exactly as it is stated here and you are unsatisfied - I'll refund your money.. Apparently Mr. ********* has made a practice of not responding to...

I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).

Firewood sheds are simple sheds designed to help your firewood dry out and also keep it from getting a lot of water on the wood when it rains or snows. The simple open front design allows the wood to be easily accessible and increases air flow around the stacked wood. The floors are designed using 2x4 boards spaced 1" apart to provide plenty of strength and allow allow air to circulate up through the floor and around the wood to season it properly. The roofs are corrugated metal but they can also be roofed with asphalt shingles.
An inclusive guide as it is, it also acts like a woodworking course it contains detailed illustrations and instructions that help you in creating the shed right from the ground. Even if you are a beginner or a professional, these shed designs can be tackled by you and also will help you in being a long term woodworker. With more than 10,000 plans, the Ryan Shed Plans is the biggest collection you can find on the internet where you can choose from a collection of styles, materials, sizes and therefore it is a definite option for everybody.​

We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.

· Gambrel styled shed — it is a very common type of shed. Its roof is highly steep and is four sided. This type of shed at some point resembles a hexagon. This type of shed is preferred as the shape of its roof makes the interior of the shed to be spacious hence creating more space where a lot of garden and outdoor tools can be stored. In this type of shed, one may have a workshop in the shed. They can even accommodate a car due to their large spaces.
I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.
A shed isn’t something you see people build…at least not very often. It’s rather the type of structure you discover in the backyard when you purchase an old house. So how do these things appear? They’re obviously built so let’s see what it takes so put a shed together. We looked around and we found a bunch of shed plans that we’d like to share with you. They’re pretty simple and you don’t need much experience with this sort of projects to be able to pull it off. They’re all customizable so you can enjoy them whether you want a pretty she shed or a manly workshop.

• Lack of harmony — building a shed that does not match the design or the color of your house would make the compound look a bit odd. It is advisable that you choose a suitable architectural design and color that will closely match with your house. That gives your compound a great look and also makes it look like both structures were built at the same time. It also gives you a sense of satisfaction and hence you will not have to waste money in the future to make one structure resemble the other.
If you don’t plan to have electricity running through your shed, this is the shed building tip you will want to listen to most. Windows easily brighten up a shed so you don’t have to hunt around for a flashlight or a lantern if you’re old school, every time you need to grab something from your shed. But…don’t go nuts and install a ton of windows or you will be giving up valuable space to hang tools or shelves.
Because My Shed Plans does not promise anything beyond belief, the product’s foundation is pretty strong. People have enjoyed choosing between the collections of shed layouts and building it themselves. It’s a great activity for the whole family, since it’s all well planned out. It can be a bonding experience, the way a team building exercise at work is.
×