3 The frame of the roof consists of four 2-by-4 rafters cut so that they rest on the front- and rear-wall top plates, as shown in the rafter detail at right. Install a gable stud directly over the center studs on both side walls to fit between the end rafter and the top plate. Install the sub-fascia and then the fascia to the front ends of the rafters.


When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.
This step by step diy woodworking project is about diy shed plans. If you want to learn more about how to build a shed in your backyard, we recommend you to pay attention to the instructions described in the article. Work with attention and invest in high quality materials, as to use the shed for many years in a row. Plan everything from the very beginning, including the building permit that is required in some cases.
Structurally speaking, some sheds are actually miniature versions of houses or barns. The gambrel storage shed plans from mybackyardplans explain the basic steps of such a project. First, the foundation is built. Then the sidewalls are installed, after that comes the roof frame, the front wall and the door, then the back wall and roof decking, the trim and finally the shingles. At the very end, the shed is painted.

If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
As we have seen there are numerous design which you may use to build yourself a shed of your choice. The truth is there are numerous shed designs which come up every year which we cannot discuss details but only mention them. These examples of sheds include attached firewood storage, Ivy, Windows, Double door, Decorative door, Porch, Shutters, End entry side entry and many others.
Listen, about the My Shed Plans Scam… all you can say is haters are gonna hate. There are way too many people on the web going about trying to ruin things for others. It probably makes them feel bigger than the basement of their parents’ house allows. In regards to your My Shed Plans product, it looks like a great deal. 12,000 shed plans, all in one package? Seriously, is there any plan that’s missing?

The plans are pirated copies, some from "mycabinandsheds.com" as well as scanned 100 year old books . They are basic plans of very limited value. I clicked on a link from a "Kim Komando" email and saw the add for 12000 plans and I figured it was a trusted advertiser. Come to find out after contacting Komando that there are 3rd party advertisers she would take no credit for endorsing. I should have done more research before I paid for anything but after finding out it is a scam I called the 1-800-390-6035 click bank number and they gave me a refund with no arguing at all.
We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
• Failure to account for climate — some people build sheds without considering the weather patterns experienced in the area. The shed ends up being exposed to harsh climatic conditions, continued exposure of the shed to such adverse climatic conditions lead to its destruction. This then leads to one spending much more money to repair the shed. The most common way in which people fail to protect their sheds from is rainwater and snow by failing to have the necessary protecting tools such as gutters and drainage trenches. Gutters are important as they direct rainwater away from the shed hence protecting the shed from getting destructed by rainwater and melting snow that is on the roof. Drainage trenches direct the water that falls directly to the ground away from the shed. These methods keep the wood used to build the sheds dry and hence they do not absorb moisture that may encourage the growth of fungi on the wood. As we have seen earlier, it is also important to coat the wood with protective coats as paint to prevent them from coming into any contact with moisture.
A garden shed can be strictly functional, but it can also be a decorative focal point around which you design your garden or yard. These plans will help you build a basic shed, but don’t stop there! To customize your shed, you could create a combination toolshed and greenhouse, put a martin house on top, or use part of the shed for a chicken coop or rabbit hutch. If you’re feeling even more adventurous, you could create a living roof of moss or succulent plants.
Before a hammer hits a nail: plan, plan, and plan some more. All too often people visit local home centers to get shed ideas. They go inside the prebuilt sheds in the parking lot and decide their own storage needs right then and there. Even worse, they'll grab a few brochures and use those ideas to find a shed design online without doing any proper space planning.
Most homeowners barely have enough time to keep their homes in shape, never mind their sheds. Heck, I was supposed to paint our downstairs bathroom before the kids got out of school last month. I just picked up the paint yesterday. That's why it's smart to choose low-maintenance materials for your shed. You usually need to pay a bit extra for these, but they'll save you time and trouble in the long run.
My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer. 

No shed, regardless of how well it's built, will last long if it's set on a weak base. Most sheds can be supported by an on-grade foundation, which consists of solid concrete blocks or pressure-treated wood timbers set directly on the ground. The concrete blocks or timbers (aka skids) must be leveled and spaced closely enough to properly support the shed's floor frame. Note that it's important to use solid concrete blocks, not hollow wall blocks, which can easily crack.
The ad shows the bright shiny new 8x12 Gabled Shed. However, after purchase, that plan does not show up anywhere. I have emailed and requested that plan several times but no response. So, thanks to those who have already posted the 1-800-390-6035 number for ClickBank customer support. It's a chore to work with their VRU but with patience, you can get a refund.
It’s not always possible, but if you’re using 4 x 8-ft. sheet siding and have enough helpers around to lift the wall when you’re done, you can save time by siding the walls before you raise them. Make sure to straighten the wall plates and square the wall by measuring diagonally before you nail on the siding. This is easier to do on a wood shed floor because you can tack the plates to the floor to hold the wall straight and square while you install the siding.
After the concrete is all ready, the sole plates are then joined together with the anchor plates which protrude out of the foundation. Use the carpenter’s pencil and measuring tape to mark about one and a half inches from the board end continually every sixteen inches till the further end. These marks guide where the studs will be placed. Mark where the anchor and the mudsill meet up with a different marker from the one used initially. The studs are then taken and galvanized nails are driven through the marked areas into the center of the board until they reach the stud bottom. The studs should be secured to the baseboard.

Garden Sheds are the most common type of sheds that you find in every backyard. Right from the typical Colorbond Shed to the charming mini building adjoined shed that is made of both timber and steel, they bring beauty to the build. Garden Buildings are basically must because most of the houses tend to be beautiful with these. They are incredibly beautiful, authentic and useful for everyone for some or other purpose. Therefore, the Ryan Shed Plans contain some of the very feasible Garden Shed plans from which you can pick a design that seems suitable to you.
• Stagnant waters — As much as the wood is coated to protect it from water, it would still be advisable to keep the wood away from stagnant waters. This is as the wood coating is not a permanent coat and so is the wood is exposed to water it will get damaged over time. The best way to avoid water paddles near the shed is building gutter systems on its roof which directs the water to a tank or a pool.
Please Note: Prices, promotions, styles and availability may vary by store and online. Inventory is sold and received continuously throughout the day; therefore, the quantity shown may not be available when you get to the store. This inventory may include a store display unit. Online orders and products purchased in-store qualify for rebate redemption. Mail-in Rebate is in the form of merchandise credit check, valid in-store only. Merchandise credit check is not valid towards purchases made on MENARDS.COM®. By submitting this rebate form, you agree to resolve any disputes related to rebate redemption by binding arbitration and you waive any right to file or participate in a class action. Terms and conditions available at www.rebateinternational.com®
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.
From start to finish, it may seem a little intimidating, but just take it one step at a time. The nice thing about building a shed is that it starts off easy (layout the foundation, building the floor, etc.), and by the time you get to some of the more daunting tasks (like the roof), you would have gained a lot of confidence/experience working your way to that point.
Complete the siding, then remove the toe-screws and move the wall aside to make room for constructing the opposite wall. Use the same chalk line template and process to build the opposite end wall. Figure C shows framing details for the front wall. Mark the curves on the 2×10 header pieces using the trammel setup shown in Photo 12 and Figure G. Cut them with a jigsaw. When you’re done building the front and back walls, set them aside so you can use the platform to build the roof sections.
Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
The Roofs of the sheds usually come in different shapes, sizes, and styles. One impeccable style among then is the Gambrel Roof, highly associated with barns and pole barns. The advantage of adopting this style is that these sheds can be used as high capacity storage spaces because of the steeper sides. Most of the recent homes have Gambler Roof Sheds because of the intricate beauty they bring to the home. Instead of bringing a standard roof, it won’t make much difference to bring a Gambrel Roof, given that you match the materials to your building.​

Once you’ve figured out what you need the shed for, it’s easy to go forward with planning. Keep in mind that sheds, no matter how small in their size, are not exactly the best projects for beginner woodworkers. Sheds are one of the most complex woodworking items to build. Some bigger sheds resemble houses so it’s not a surprise a shed is a project for a skillful hand.
Shed are also great if you have a hobby. For example, if you’re passionate about pottery, gardening or even painting, you could use the garden shed as your private workspace. You can give it windows if you think you’ll need natural light inside. In fact, this can be an opportunity to upcycle some old windows and doors. Check out this project that we found on countryliving to see how this chic shed was built.
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.
Listen, about the My Shed Plans Scam… all you can say is haters are gonna hate. There are way too many people on the web going about trying to ruin things for others. It probably makes them feel bigger than the basement of their parents’ house allows. In regards to your My Shed Plans product, it looks like a great deal. 12,000 shed plans, all in one package? Seriously, is there any plan that’s missing?
This is nothing but a pyramid scheme in disguise. Don't spend the first $37.00, they lead you to believe that you are getting discs and actual plans until you pay $37.00, then they tell you that you have to download everything but at an additional price. I'm calling the Fraud Department at the Texas State Attorney Generals office and reporting them.

We assembled each layer with pocket screws before gluing the two layers together, but if you don’t own a pocket hole setup, you could simply screw through the overlapping boards instead. Complete the door frame. Then cut the 4 x 8-ft. grooved plywood to fit the lower recess, and cut a piece of 1/4-in. acrylic sheet to fit the upper recess. Secure the plywood and acrylic sheet with 1/2-in. x 1/2-in. moldings nailed to the inside. Sand the edges of the door flush.

2012: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2013: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2014: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2015: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2016: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2017: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2018: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2019: 1, 2, 3, 4, 5,
Well, not these plans. You have the option of building a very functional and spacious lean-to shed on different foundations. Your foundation choices are a concrete slab, a wooden floor supported by concrete piers, or a wooden floor supported by skids. That lost option also means that your lean-to could be mobile as well so you won’t have to decide where you want to permanently put it.
Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up. However, if this is not possible with the design you’ve chosen, simply nail them downwards through the plywood and joists or toenail them into place by driving the nails downwards and at an angle. Note that you will probably need other people to help you hold the wall structures up until they can be attached to one another.[9]
The roof truss can be built using 2x4 or 2x6 lumbers. There are different ways to build the truss, the most common is cutting out the rafters and assembling them using gussets. The easiest way to build the roof truss will be using plans. The other option will be to lay the 2x4’s or 2x6’s on the level floor set them how you want your roof and make a template. Once you are happy with the look of your template you can build the rest.
We make great shed plans.  It’s all we do and we love it! All of our shed plans are available to download instantly at checkout. There isn’t an easier shed plan checkout process on the web!  When you buy a plan from us, you are guaranteed a great plan at a great value.Every one of our 200+ plans are easy to build thanks to our thorough and easy to follow instructions. All of our shed plans come with more information compared to the competition. Things like a tool list, a cut list, and a material list in excel format are all included.

Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
A shed could double as a greenhouse, in which case you can use the shed plans provided on instructables. In this particular case, the shed was built out of old windows. An old window isn’t exactly something you can repurpose easily but here it’s a perfect fit. The first step is to gather enough windows. After that, it’s time to build the frame and you’ll need some wood for this part. Make sure the foundation is secure before you screw in the windows.

I don't waste my time on free plans, store-bought sheds, or ready-made, mail order kit solutions... been there, done that. Free means lack of user feedback and you get absolutely no customer support. With store-bought and ready-made mail order sheds: they're flimsy, profit-driven solutions that I've always had to tear apart and modify too much to get the storage space to work or to match the character and style of the home.

×