There are many types of roof design that you can use to add to your shed. But since you are a beginner, I would advise you to build a simple roof structure so as to avoid the frustrations that can come with building complex roof structures. Complex roof structures also require additional tools and greats skills hence, it is time consuming and a bit expensive compared to the simple roof structure.
When I tried my first woodworking project, all I wanted to is quit it even before I completed and most of my measurements went wrong, leaving me frustrated. Are you the same? Did you waste the materials, resources, money, time and energy doing it? Have you been to the DIY stores only to come back with hopeless things that turned out to be unfit taking around half a year or an entire year to complete the wooden shed? To change that, you should avoid the doubling over of materials, shorten the time and reduce the invested energy as well.​
For the shed's floor deck, use ¾-in. exterior-grade plywood; anything thinner will flex between joists. (Note that a double layer of ½-in. exterior ply is okay, too.) If you plan to store heavy items, such as a lawn tractor or woodworking machines, consider using ¾-in. tongue-and-groove plywood. This costs slightly more, and is a bit more troublesome to install, but its edges lock tightly together, creating a rock-solid, rigid floor. In areas with excessively high moisture and large numbers of wood-boring bugs--such as Florida, Alabama and the other Gulf Coast states--consider using pressure-treated plywood for the floor deck. It's particularly resistant to moisture and insects.
Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
A shed is a simple roofed single floor structure that is used for storage of garden tools, shelter domestic animals, performing out hobbies and also as a workshop. They can also be referred to as outhouse, outbuilding or shack. They are mostly situated in the back garden. Sheds vary in their sizes from large sheds to small sheds depending on their purposes. Storage sheds are mostly small in size but industrial and farm sheds are mostly large depending on the volume of the goods they hold. Sheds can be built from different materials like wood, metals, and plastic. The types of shed construction include metal sheathing, plastic sheathing, and complete wood construction.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
Cut the treated 6x6s to 12 ft. and set them on the gravel so they’re parallel and the outside edges are 6 ft. apart. On sloped ground, you’ll have to raise the 6×6 on the low side until it’s level with the adjacent 6×6. Do this by stacking treated 2x6s, 4x6s or 6x6s on top of the treated 6×6 to reach the right height. Use a 4-ft. or longer level to make sure the 6x6s are level and level with each other. Finally, square the 6x6s by adjusting the position of one 6×6. Slide the 6×6 back and forth, not sideways, until the diagonal measurements from opposite corners are equal. Build the platform with treated 2x6s, 24 in. on center, and cover it with treated 3/4-in. plywood (Figure B).
Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up. However, if this is not possible with the design you’ve chosen, simply nail them downwards through the plywood and joists or toenail them into place by driving the nails downwards and at an angle. Note that you will probably need other people to help you hold the wall structures up until they can be attached to one another.[9]

Included with your instant download will be email support from me about any questions you might have on how to build a shed or about the plans or construction methods covered. I am very pleased to offer this service for the low price I charge, but believe it or not, I don't get that many support inquiries and I feel this is because of the comprehensive nature of the plans for all the information needed to successfully build your own shed.


Once you’ve figured out what you need the shed for, it’s easy to go forward with planning. Keep in mind that sheds, no matter how small in their size, are not exactly the best projects for beginner woodworkers. Sheds are one of the most complex woodworking items to build. Some bigger sheds resemble houses so it’s not a surprise a shed is a project for a skillful hand.
Staining: There are two types of staining. These can either be natural where the stains are purposed to enhance the beauty of the wood or unnatural means which involve activities like painting the wood. In natural means, one has to keep maintaining it frequently as they last for approximately two years while unnatural means last as long as up to eight years without needing any maintenance.

Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.
· Gable shed — they are also common due to their stylish two-faced roof that meets at the center forming a peak. Their roof shapes are conducive as they provide adequate space, but not as much as the gambrel styled sheds. They provide adequate spaces for storage of garden tools. They also accommodate larger items as motorcycles. The property that makes these sheds become common is their stylish shape that blends in well with any compound with a house of any design.
This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
There are many ways and methods of beginning a foundation for your shed, but so as to keep this manual simple we will begin by looking at the procedures followed while building a shed. The types of the foundation include a concrete slab foundation, a sunken pillar, and wood skid. The e-book is helpful to those who might not be interested in shed building from the scratch. It takes time to explain in detail the materials required and the step by step methods required to give one the moral to build the shed. It also explains the easy steps in a very fun way. Furthermore, the process of building your shed on your own is quite a fun task as one watches the shed start from nothing to something beautiful and useful. Isn’t that exciting? At least one feels useful after performing such type of a task that feels to be quite a huge burden. The following steps are derived from the e-book on steps used to build a foundation:
Additional options include ready-built sheds that are shipped completely assembled. Find out if these will need to be finished, sanded, and painted or stained. Prefab and already-built sheds are an attractive concept but investigate shipping costs. Consider feasibility and logistically how you'll manage the project. Some sheds are delivered by a truck equipped with a crane. Will the crane be able to drive on your property and deliver the building without tearing down walls or fences or plowing over a lawn or garden?
Copyright © 2019. All Rights Reserved. 3DSHEDPLANS™ is officially registered and protected trademark in the United States. Owned & operated by Netholics Media, LLC. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission or any other requests, please get in touch with us using the contact form provided. Use of this website constitutes acceptance of the 3DSHEDPLANS.COM’s User Terms and Privacy policy.
Because My Shed Plans does not promise anything beyond belief, the product’s foundation is pretty strong. People have enjoyed choosing between the collections of shed layouts and building it themselves. It’s a great activity for the whole family, since it’s all well planned out. It can be a bonding experience, the way a team building exercise at work is.

This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.

When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.
Siding panels made from oriented strand board cost far less than solid wood or plywood panels, and come preprimed, saving you money and labor. Since the panels are also structural, you don’t need an additional layer of sheathing under the siding. You’ll save about $500 over the cost of cedar plywood siding. It’s the perfect material for constructing inexpensive storage sheds.
The sheds available can be distinguished easily as they come in pale green that eventually fades into silvery grey. The Pressure treated sheds are relatively a bit costlier than the DIP treated sheds and the advantage of using them is that they don’t need further preservative treatment and can serve the whole during the entire ten years saving a lot of time and money.​
Normally we try to help our customers as much as possible, especially if it is a matter of helping to figure out where certain material goes on the building. Keep in mind, you are responsible for correctly constructing the shed if you purchase a kit, but we can offer direction. (Prior construction experience is recommended.) If there is any uncertainty about whether or not you will be able to assemble the storage shed, consider one of our build-on-site options and we will send a team to assemble the building for you.
A How To Buid A Shed e-Book that comes free with every shed plan order. This e-Book has over 50 pages of illustrations showing each step to building all the roof types shown on our shed building plans, how to frame shed walls, how to frame a shed floor, how to install siding, how to build roof rafters and trusses. It also includes nailing schedules and optional roof details.

The program consists of a wide range of downloadable files, which contain many different step by step instructions and plans related to woodworking. These tutorials are focused on a wide range of projects, such as potting shed plans, wood shed plans, storage shed plans, garage storage plans, house plans and more. All the shed plans discussed in this program are divided on the basis of each project type.
There are many types of roof design that you can use to add to your shed. But since you are a beginner, I would advise you to build a simple roof structure so as to avoid the frustrations that can come with building complex roof structures. Complex roof structures also require additional tools and greats skills hence, it is time consuming and a bit expensive compared to the simple roof structure.
When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.
If you decide that you don’t want the second package after purchasing the first package, you will be offered a third package which is even more explicit that contains tonnes and tonnes of woodworking plans that are laid over thousands of pages. All these eBooks are neatly organized, very much real and indeed the amount of plans that they contain might even come out as nauseating, if you’re someone who doesn’t have so much of patience to go through all of them.
It is worth mentioning that the files in this program can be easily downloaded into PDF format. This provides you with each access at your construction site. The best part is that you can easily browse through different shed plans on your server, and pick the ones that meet your specific project needs and requirements. You can even download everything on your server. The process is very easy to access and understand.
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
×