We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
Ryan’s Shed Plans is going to turn you into the ultimate builder – a builder of sheds, a builder of greenhouses, a builder of tiny homes, and a builder of many things. And nope, no previous experience is needed. This unique online program breaks down the steps to building over 12,000 different types of sheds in such a way that anyone can build the shed of their dreams, sans all the frustration and confusion that often comes with most woodworking projects. It’s like a “Building For Dummies” guide that teaches you the accurate steps needed to build everything from a garden shed to a storage shed, greenhouse, and more. So, if you’re tired of finding building plans that are missing steps, that don’t make sense or worse, that don’t accurately list the measurements or tools needed, you need to give Ryan’s Shed Plans a look.

Once you’ve received the package and all it entails, you can begin creating your own outdoor shed whenever you feel ready. The only time you need to exert the effort is when you’ve begun construction. When you do decide to start, make sure that you have a decent amount of time as well as motivation to carry through the whole project. You don’t want to be left with an unfinished shed out in the yard, a constant reminder that you tried and failed.
Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.

Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
The trick for learning how to build a storage shed is to stretch the line across a scrap of wood at each end so there’s a space between the line and the part you’re straightening. On a wall, for example, tack small scraps of 1/2-in. plywood at each end of the top plate and stretch a line very tightly over the plywood. Then use a third scrap as a gauge to check the distance between the line and the lumber. Use braces or whatever is needed to adjust the top plate until the gauge just fits. Now your top plate will be perfectly straight.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
The best spot for a shed is level, well-drained ground close to where you work in your garden or yard. The location doesn’t need to be perfectly flat; the foundation design shown in the plans allows for adjustments to make the floor level. Small sheds require only a top-of-soil foundation, even in locations with freezing winter temperatures. Precast concrete deck blocks work perfectly for this.
· Firewood storage sheds — mainly used to store firewood from elements of weather such as rainfall that may destroy them. The most common type of firewood shed is the lean on shed. It is also the most suitable as it allows free circulation of air, therefore, preventing dampness of the firewood. It is also near the house so the firewood is stored near your house and may access anytime you need them.

I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
The shed we built rests on a foundation made up of 12 solid-concrete blocks. The 4 x 8 x 16-in. blocks are arranged in three rows spaced 59 in. apart. These blocks are typically set directly on the ground, but we put down a 4-in. bed of gravel first because our site occasionally receives groundwater. The gravel will keep the soil beneath the shed from eroding or becoming soggy.

But I've never drilled a pilot hole in my life, so what do I know. No seriously, unless it's super delicate or thin, I just use the impact driver and make it work. Sure, sometimes the wood splits a bit, but I don't care about looks and most of my projects are built with pallets and discarded stuff anyway. But the thought of predrilling every hole?? And messing a corded driver?? Come on dude, that's laughable!
You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
The plan features not only a cutting list and project diagram. There are also clear instructions starting from building the base and ending with installing the windows and doing the trims. Once you’ve built a small shed like this, you’ll have enough experience to build a bigger one that fits all the garden equipment as well. A tiny shed like this though is a necessary item for every home!
I can’t believe the amount of plans your able to offer for the price. I’m planning on building a summerhouse at the bottom of the garden next month, and I have a rough idea of how I’d like it to look. What I do need is some help with plans and an idea of how much it’s going to cost. Looks like that’s all covered now! With 12000 projects included, I’d put money on it that there’ll be at least one design close to the one in my head. In fact I’m going to. Seams like a sure bet to me. Cheers Jack!
Well, if you look at the name of the project, it doesn’t actually appear to be what it says. The title says that Ryan Shed Plans also known as MyShedPlans contains a compendium of 12,000 Blueprints. But if you look at the package carefully, the phrasing on the website contains 12,000 Woodworking Shed Plans and Shed Designs. Most of the blueprints are ShedPlans that cover both small scale and big scale projects, and you can come across thousands and thousands of different blueprints with different architectural, functional and aesthetic features.​
I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).
• The ceiling is too low — these may tend to be one of the least concentrated on problems as they happen least when one expects. It is important to be aware of the low ceiling so as to save on your funds in putting a higher one. Ensure that each and every measurement is taken carefully and is also executed. The best way to determine the height of your shed is by scanning through the items you are planning to store there and use the tallest. As mentioned earlier, the installation of steep roofs might be risky but in the long run become an added advantage as they create more space inside the shed.
I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.
• The ceiling is too low — these may tend to be one of the least concentrated on problems as they happen least when one expects. It is important to be aware of the low ceiling so as to save on your funds in putting a higher one. Ensure that each and every measurement is taken carefully and is also executed. The best way to determine the height of your shed is by scanning through the items you are planning to store there and use the tallest. As mentioned earlier, the installation of steep roofs might be risky but in the long run become an added advantage as they create more space inside the shed.
I tell most of my subscribers to use his program as a resource just like you would a book.   His plans are not all you would ever need in regards to shed plans, but it is a nice start.   For the cost of the program, it is on par with any book you would buy at the store to find shed ideas or plans.  However, you get thousands of plans and 4 bonus offers instead of a few good plans.
This 8×15 shed from Lifetime is entirely constructed in the USA, and comes equipped with two shatter proof windows, shutters, and side entry with 6 skylights for stunning illumination within. The powder coated steal A frame roof trusses and reinforced steel internal wall structure are made of durable polyethylene. The high grade metal screws make it incredibly easy to assemble this shed. Additional airflow is provided by the peak screen vent cap. You also get the added benefit of UV-protection that helps to prevent fading and cracking over time. This storage unit can be used year-round and comes with a fantastic 10 year limited warranty from the manufacturer. The floor of this unit is built so tough that it will never crack, peel, or chip. It’s also slip-resistant and resistant against stains, oils, and solvents. All in all, this is a fantastic shed for those looking for something that is built tough and built to last.
We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
· Personal belongings storage shed — as you are growing older each and every day, you may tend to accumulate so many items that congest your house. You may not want to throw or give away any of the items accumulated as they probably hold a sentimental value to you. The best way in which you can solve a headache is by building yourself a shed which you can be storing your personal items as you continue accumulating them.
×