My Shed Plans just might be every do-it-yourself junkie’s dream product. Ryan Henderson, the creator of My Shed Plans, has been building one-of-a-kind outdoor sheds for more than 20 years. If you believe his story, he has unselfishly decided to share his love of woodworking and carpentry through his guides which will enable the everyman who does not have handyman experience to build their very own outdoor shed. Can it be true?
Apparently, most guides provide you with the same old information that doesn’t offer any benefits to a gardening or DIY enthusiast. Fortunately, you can benefit from programs like My Shed Plans. This exceptional program is easily available on the internet at an affordable price, and helps you learn everything about building a shed in your garden or backyard.
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
After the concrete is all ready, the sole plates are then joined together with the anchor plates which protrude out of the foundation. Use the carpenter’s pencil and measuring tape to mark about one and a half inches from the board end continually every sixteen inches till the further end. These marks guide where the studs will be placed. Mark where the anchor and the mudsill meet up with a different marker from the one used initially. The studs are then taken and galvanized nails are driven through the marked areas into the center of the board until they reach the stud bottom. The studs should be secured to the baseboard.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
When I tried my first woodworking project, all I wanted to is quit it even before I completed and most of my measurements went wrong, leaving me frustrated. Are you the same? Did you waste the materials, resources, money, time and energy doing it? Have you been to the DIY stores only to come back with hopeless things that turned out to be unfit taking around half a year or an entire year to complete the wooden shed? To change that, you should avoid the doubling over of materials, shorten the time and reduce the invested energy as well.​
A tool shed is pretty easy to build. We found this inspiring example on thecavenderdiary which, as you can see, has a pretty straight-forward, traditional look. It has its back on the wall and inside there’s not much worth mentioning, except maybe for those practical storage hooks, shelves and rods on the inside of the doors. Check out the plans for this toolshed and find a way to customize them according to your own storage needs.
If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
The female version of man caves is she sheds: havens to escape that can be designed and decorated in whatever style the owner desires. Inspired by a tiny hummingbird viewed nearby, this shed is aptly named Hummingbird Cottage. Lovely photos on Instagram reveal that the shed is used for art projects, as a retreat, displaying vintage pottery, and for entertaining friends. Extras like a hanging faux-crystal chandelier, potted flowering plants, wreaths, and stained glass give it a personal touch.
2012: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2013: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2014: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2015: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2016: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2017: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2018: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2019: 1, 2, 3, 4, 5,
• Violations of building codes — before the beginning of construction of your shed, it is important to check for the building conducts set by the authorities in your town. You are not supposed to begin any construction works before applying for a permit from the local authorities. This helps you avoid a lot of time being wasted in lawsuits, paying fines and such inconveniences. If you had already begun building your shed before your permit is authorized by the authorities, they will demand you to start all over again. That leads you spending more money on the construction of the shed. During fitting of electric lighting, you are supposed to involve a legally certified electrician to avoid the long arm of the law and to avoid accidents as electrocution and even fire. The same laws apply to gas and water pipes installation.

Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
Because the shed is designed to abut to another structure, the foundation need only be pressure-treated skids, the roof pitched in only one direction to shed water, and the back wall sheathed with 1/2-inch CDX plywood, which withstands indirect exposure to moisture. See Anatomy of an Outdoor Shed or Playhouse for more about typical shed construction.
The slanted roof of a modern house in the San Francisco Bay Area is echoed in this small wooden tool shed. Conceived by Astrid Gaiser Garden Design, the shed becomes an interesting part of the landscape design instead of something tucked or hidden in a corner or side yard. Gaiser even added a chalkboard for kids and adults to draw and write messages.
Don’t be tempted to get sloppy when you square up the floor and walls of your shed. An out-of-square start will haunt you through the rest of the project, from doors and windows to trim and roofing. For a concrete slab, measure diagonally across the opposite corners of the form boards. Then adjust the forms until the diagonal measurements are equal. Do the same for a wood platform floor. If you’re installing sheet siding on the walls, before you stand them up, measure diagonally and square up the wall before you nail on the siding.
I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.
A How To Buid A Shed e-Book that comes free with every shed plan order. This e-Book has over 50 pages of illustrations showing each step to building all the roof types shown on our shed building plans, how to frame shed walls, how to frame a shed floor, how to install siding, how to build roof rafters and trusses. It also includes nailing schedules and optional roof details.
• Use of crooked studs — while building the shed, one would build a shed with crooked studs which may render the shed unstable. It is advisable that as one is building a shed to ensure that all the studs used are straight and uncompromised. That will ensure that the body frame of the shed remains strong enough to hold its own weight and be durable enough for a long time.
I'm on my third Central vac over a period of 15 years. All have been Kenmore. I have a 2500 sq ft home, I vacuum every day. Aways burn out the power head, hence why I am shopping again. I have flooring & carpet throughout. I want lots of power& a hose that doesn't kink (what a pain that has become) I refuse to spend more than $700, as they just don't last. Any suggestions? I've been checking out Electrolux........

Proceeding with your shed requires smart planning. For starters, you may need a permit from your local zoning authority and/or homeowners’ association to build a new structure on your property; check with the proper authorities before you even invest in the materials. Plus, there may be rules that dictate how you may use your shed, or whether you’re allowed to wire it for electricity. Once you get the go-ahead to build, you’ll want reliable guidelines. For anyone inclined to DIY rather than buy a prebuilt shed, look over a selection of free LP Outdoor Building Solutions plans based on your choice of size and roof style. Each set of plans comes with extensive material and hardware lists, detailed construction information, and tried-and-true building tips.

Woodworking is an art, and like most art forms, it only require dedication, skill and time. Good thing you have our shed plans. You wouldn’t be spending months figuring out how to cut wood pieces, etc. You will get enough guidance to start right away and build a gorgeous shed for your garden. The benefit? You would learn how to build sheds within days. No experiments and no wasting time!
This garden shed is the tiniest, but that’s the beauty of it – it’s exactly the right size to store your gardening tools. As there are more details (all in order to give you more storaging options), it might take a little longer to build this shed than the others, also the makers of the plan have said it cost around $400 to build this, but the shed is definitely one of a kind and worth the efforts.
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
Don’t be tempted to get sloppy when you square up the floor and walls of your shed. An out-of-square start will haunt you through the rest of the project, from doors and windows to trim and roofing. For a concrete slab, measure diagonally across the opposite corners of the form boards. Then adjust the forms until the diagonal measurements are equal. Do the same for a wood platform floor. If you’re installing sheet siding on the walls, before you stand them up, measure diagonally and square up the wall before you nail on the siding.

A How To Buid A Shed e-Book that comes free with every shed plan order. This e-Book has over 50 pages of illustrations showing each step to building all the roof types shown on our shed building plans, how to frame shed walls, how to frame a shed floor, how to install siding, how to build roof rafters and trusses. It also includes nailing schedules and optional roof details.

There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.
Nobody knows your garden better than you. Nobody loves your garden as much as you. You would know how your garden, including its soil, surrounding plants and other elements, function in different weather conditions. Wouldn’t it make sense if you yourself decide what type of foundation to lay, how to ensure the shed’s stability keeping in mind the surroundings and the base?
It can be easy to get excited and overestimate your DIY abilities when you start a new project. The passion and excitement makes you want to dream big and get creative. But blindly following your imagination can be a step in the wrong direction. If you’re a newbie to DIY woodworking, then you’ll probably want to keep it simple. Otherwise you run the real risk of ending up with a sub par build or even having to rebuild it altogether.
• Stagnant waters — As much as the wood is coated to protect it from water, it would still be advisable to keep the wood away from stagnant waters. This is as the wood coating is not a permanent coat and so is the wood is exposed to water it will get damaged over time. The best way to avoid water paddles near the shed is building gutter systems on its roof which directs the water to a tank or a pool.
Compromises are a part of life when you don’t have enough to support your dreams. Ever wanted that Lamborghini but settled for another sedan instead? Luckily, you won’t have to do this with your shed. While a professional woodworker would cost you thousands of dollars to build your dream shed, with us it’s only a few bucks or even free. That’s right! Our free and premium plans are all that you need. We have a wide variety of more than 40 free and premium plans of almost every dimension possible. We guide you on how to build and design the sheds. Whether you are looking for an exquisite addition to your garden or a sturdy shed to keep your tools in, we have them all for you right here!

… Just in case this is NOT enough shed Plans for you, take a look below. There’s a whole lot more! This is just a taste of the staggering amount of shed plans and woodworking projects available. The biggest problem you’ll have with Ryan’s Shed Plans is, you won’t know which storage shed plans to choose from. The choices and different styles of sheds are endless!
There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.

Ø Clay tiled sheds — as the name suggests, these are sheds that their roofs consist of clay tiles. The clay tiles make the wooden sheds look visually appealing. Nevertheless, one has to plan for the clay tiles from the foundation of the shed so that it can support the roof due to the bulkiness of the roof. The wooden walls need to be strong enough to support the roof. It would be advisable to hire an expert to install the clay tiled roof to avoid complications.

When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.
A shed is a simple roofed single floor structure that is used for storage of garden tools, shelter domestic animals, performing out hobbies and also as a workshop. They can also be referred to as outhouse, outbuilding or shack. They are mostly situated in the back garden. Sheds vary in their sizes from large sheds to small sheds depending on their purposes. Storage sheds are mostly small in size but industrial and farm sheds are mostly large depending on the volume of the goods they hold. Sheds can be built from different materials like wood, metals, and plastic. The types of shed construction include metal sheathing, plastic sheathing, and complete wood construction.
The toughest and most important part of building a shed is finding the right plans. Sure you can just start building without plans, but do you know how it will look when you are done? Or you can search for free plans, but are they designed right? What I recommend is finding plans, even if it means you have to pay a little. Make sure that sample plans are provided so you know what you are getting. Do not make a purchase just because they show lots of nice sheds but no sample of the actual plans you will be buying. Look for the following before you decide to purchase:
A How To Buid A Shed e-Book that comes free with every shed plan order. This e-Book has over 50 pages of illustrations showing each step to building all the roof types shown on our shed building plans, how to frame shed walls, how to frame a shed floor, how to install siding, how to build roof rafters and trusses. It also includes nailing schedules and optional roof details.
This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away. 
×