I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.
Before you start building your shed, there are a few things you might want to clear out first. For instance, does your town require you to obtain a building permit? Where do you want to build the shed? Is building a shed allowed on your property? Listing down the equipment, furniture, fixtures and goods to be stored in the shed, as this will determine what type of shed you need. What should be the size of the shed? There are practically lots of areas that you need work on before starting with the building phase. The following breakdown will help you get through this phase:
I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.
When I tried my first woodworking project, all I wanted to is quit it even before I completed and most of my measurements went wrong, leaving me frustrated. Are you the same? Did you waste the materials, resources, money, time and energy doing it? Have you been to the DIY stores only to come back with hopeless things that turned out to be unfit taking around half a year or an entire year to complete the wooden shed? To change that, you should avoid the doubling over of materials, shorten the time and reduce the invested energy as well.​
A tool shed is pretty easy to build. We found this inspiring example on thecavenderdiary which, as you can see, has a pretty straight-forward, traditional look. It has its back on the wall and inside there’s not much worth mentioning, except maybe for those practical storage hooks, shelves and rods on the inside of the doors. Check out the plans for this toolshed and find a way to customize them according to your own storage needs.

With these basic easy steps, your structure is complete. You may modify the interior of the shed according to how you will be using it. You may modify it by addition of shelves that you can mount on the walls of the structure. The added shelves also increase the storage capacity of your shed. You may also consider adding a lighting system to your shed, it is highly important. In the next phase of the guide, I will take you through the mistakes that are made in shed building so that you are not stranded in the mentioned silly mistakes.


Before you exert effort in finding the woodworking company with the best shed plans, it is very important that you determine first the right type of shed that will suit your purpose. Now, aside from the purpose, there are other things to consider like the area where to put the shed (shed plans 12×16), the things that you will store in the shed, the appropriate building materials to use, the kind of environment or the weather in your place, and of course, safety issues. Will the shed be also used for the family’s recreational activities, or for workshops and meetings, or for some business ventures? Purchase shed plans because they can help in answering some of our important questions about this matter.

A shed is a simple roofed single floor structure that is used for storage of garden tools, shelter domestic animals, performing out hobbies and also as a workshop. They can also be referred to as outhouse, outbuilding or shack. They are mostly situated in the back garden. Sheds vary in their sizes from large sheds to small sheds depending on their purposes. Storage sheds are mostly small in size but industrial and farm sheds are mostly large depending on the volume of the goods they hold. Sheds can be built from different materials like wood, metals, and plastic. The types of shed construction include metal sheathing, plastic sheathing, and complete wood construction.
Staining: There are two types of staining. These can either be natural where the stains are purposed to enhance the beauty of the wood or unnatural means which involve activities like painting the wood. In natural means, one has to keep maintaining it frequently as they last for approximately two years while unnatural means last as long as up to eight years without needing any maintenance.

Think of a shed as a useful multipurpose addition to the backyard. You could use it to store shovels and gardening supplies or all the bbq supplies. It doesn’t need to be big. In fact, a tiny shed like the one featured on ana-white should be enough. Check out the tutorial and the shed plans to find out everything you need to know about this project. If you decide to build your own garden shed, you’ll need the following supplies: 2 sheets of plywood, some wooden boards, hinges, handles, a latch, galvanized nails, roofing, wood glue and materials for the doors.

I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.
Water is wood's worst enemy. Given the right circumstance and enough time, excessive moisture can rot framing, warp floors and doors, corrode hinges and breed mold and mildew. Fortunately, there's an easy remedy. First, be sure that the lowest wood member--the mudsill--is at least 6 in. above the ground. That's sufficient space to allow fresh air to circulate under the shed.
There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
When elaborating the shed plans, take into consideration the purpose that the shed will serve. This will help you determine the suitable dimensions as well as the structure of the interior. Keep in mind that you’ll most likely want to have some shelves and a table inside the shed so you need to add these to the list of materials. You also need to take into account the tools you’ll need for the project so you can plan accordingly. You’ll probably need a saw, a drill, a shovel and a few other basic things. As far as the materials go, it all depends on the type of shed you want to build. On instructables you can find detailed instructions and lists which teach you how to built a cute shed just like this one.

Nobody knows your garden better than you. Nobody loves your garden as much as you. You would know how your garden, including its soil, surrounding plants and other elements, function in different weather conditions. Wouldn’t it make sense if you yourself decide what type of foundation to lay, how to ensure the shed’s stability keeping in mind the surroundings and the base?
When you open them on the computer, you have to fill them up and make them organized as the PDFs and Ebooks are either in not very compatible format like you have to rotate them the right way every single time. The product is not exactly disappointing on a whole, but with so many blueprints it is tough to find which one is good and which one is not as you have to go through all of them to decide that.​
Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
Before you start building your shed, there are a few things you might want to clear out first. For instance, does your town require you to obtain a building permit? Where do you want to build the shed? Is building a shed allowed on your property? Listing down the equipment, furniture, fixtures and goods to be stored in the shed, as this will determine what type of shed you need. What should be the size of the shed? There are practically lots of areas that you need work on before starting with the building phase. The following breakdown will help you get through this phase:
Once you’ve figured out what you need the shed for, it’s easy to go forward with planning. Keep in mind that sheds, no matter how small in their size, are not exactly the best projects for beginner woodworkers. Sheds are one of the most complex woodworking items to build. Some bigger sheds resemble houses so it’s not a surprise a shed is a project for a skillful hand.
×