As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
Because the shed is designed to abut to another structure, the foundation need only be pressure-treated skids, the roof pitched in only one direction to shed water, and the back wall sheathed with 1/2-inch CDX plywood, which withstands indirect exposure to moisture. See Anatomy of an Outdoor Shed or Playhouse for more about typical shed construction.
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.
We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
A 1964-built Eichler home was bought in original condition with vintage appliances, fixtures, and finishes. The new owners wanted to retain its iconic midcentury modern design but requested that Gast Architects make some updates to create a calm, light-filled, and inviting home. Gast strived to preserve the signature finishes of the house while creating a larger, more modern kitchen, opening up the floor plan, and updating the master suite. The shed in the backyard repeats the lines of the main house, resembling a mini Eichler.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
Ø Clay tiled sheds — as the name suggests, these are sheds that their roofs consist of clay tiles. The clay tiles make the wooden sheds look visually appealing. Nevertheless, one has to plan for the clay tiles from the foundation of the shed so that it can support the roof due to the bulkiness of the roof. The wooden walls need to be strong enough to support the roof. It would be advisable to hire an expert to install the clay tiled roof to avoid complications.
There are over 12,000 different shed plans and woodworking endeavours for you to choose from, so the projects are pretty much endless. You are given everything you could possibly need to build your own beautiful outdoor shed. For those who already have years of woodwork and carpentry experience, My Shed Plans may not offer you enough information that you don’t already know. The only benefits you’ll get from the package are the innovative shed blueprints and designs, which can be help enough.
· Tool storage shed — they are used to store the tools that a homeowner may need to maintain their home compounds. They may be installed with ramps at their entrance to make it easier for storage of heavy items. They are also conducive for storage of bicycles and yard tools. Your compound, therefore, looks neat as the untidy yard tools are kept indoors.
When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.
Our wood greenhouse shed plans have lots of windows and use clear polycarbonate roofing that lets in plenty of light to keep your plants happy and green. Several designs use the same doors that are installed on residential homes to keep construction simple and allow the door to have a glass panel to let in even more sunlight. The floors are made using 2x6 pressure treated wood so plants can be watered inside without the worry of damaging the floor.
We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.

If you don’t plan to have electricity running through your shed, this is the shed building tip you will want to listen to most. Windows easily brighten up a shed so you don’t have to hunt around for a flashlight or a lantern if you’re old school, every time you need to grab something from your shed. But…don’t go nuts and install a ton of windows or you will be giving up valuable space to hang tools or shelves.
• Improper geographical placement — this is one of the huge mistakes one may make while shed building. It may be too close to your house hence obstructing your beautiful view from your living room or your kitchen as you are cooking. The last thing one would want is not like your house because of a simple thing as a view, so be careful with where you place your shed. One may also build the shed too far away from their house which again is an inconvenience. Who would want to walk from your house to your shed to get some tool you need and you have to trek some long distance? You may also need your shed someplace you can see due to the security reasons. You would want some stupid thief taking your stuff without you see them, would you? Or walking down a snowy lane during a chilly night just so you could get something from your shed. Before building your shed consider all the factors whether positive or negative and then come up with the place in your compound with the most advantages compared to disadvantages.
Wait, I am not over yet. Ryan backs up his collection of shed plans with a very bold money back guarantee. It applies to everyone. You do not have to be an expert woodworker to be able to benefit from this collection. In fact, any person with our without the basic woodworking skills can benefit from it. And in case, you are not satisfied with the material you get in the ‘My Shed Plan’, you can put a claim for a refund and you will get all your money back. No questions asked. You have the time to look at the collection for 60 days and if even after that you are not happy, it won’t cost you a dime.
We provide outdoor shed plans that are affordable and easy to build from. Our storage shed plans are organized so that you can buy shed plans and build your own shed no matter what your skill level. There are helpful how to build instructions and tips that go along with each stage of the storage building process from the foundation, floor, walls to the roof. Building your own shed saves you money and is a very rewarding experience that adds value to your property. Click the shed images above to view our library of over 200 storage shed plans.
A saltbox shed is defined by its double sloping roof style. The front roof has a steep slope of 12/12, and the rear roof has a lower slope of 5/12. Most plans have options for the doors on either the front or side. Click on the images to view more details. The saltbox style evolved from the practice of extending the second floor roof line down to the first floor level to create additional covered living space. The design adds a south eastern flair to back yard shed designs.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.

The next section of the guide that I will take you through is the best ways and designs one may use to build an ideal shed according to one’s desires. We all have different tastes, so it is important to go through some of the designs used so that one may pick the design that suits you better. I will discuss the different best sheds designs and their benefits.


We’re not going to tell you that all pre-made sheds are bad. On the contrary, if you spend enough money, you can buy a pre-made or so-called ‘flat-pack’ shed and it’ll last you a very long time. However, buying a pre-built shed will cost you double, triple or even quadruple what it would cost you to build your own. DIY sheds are cheaper to build than pre-made sheds, and because you are building them yourself from scratch, you can be sure of the quality. This is a key point, because with a pre-made or flat-pack shed, you can never be sure that the lumber being used is of good quality, or even if it came from sustainable sources (if that’s important to you).You can also put your mark on a shed you build yourself. Feel free to mark the lumbar you use to show off your workmanship, and feel free to modify the design of the shed however you like. You won’t be constrained by building your own shed either, meaning you can add shelves and intricate design features as you go along. Until now, the only option you had was to hire a professional to build your shed since you never had the knowledge to do so. But, today is your lucky day! Welcome to 3DSHEDPLANS™, where we offer gable, lean-to and hip shed plans that come with a complete list of tools, accessories, hardware and material you would require to do the job yourself. And, it’s not that difficult at all! Our plans come with detail instructions, 3D dimensions, list of materials and even highlighted points where you need to nail to attach the lumber. What else would you require to start working on your shed right away?
Structurally speaking, some sheds are actually miniature versions of houses or barns. The gambrel storage shed plans from mybackyardplans explain the basic steps of such a project. First, the foundation is built. Then the sidewalls are installed, after that comes the roof frame, the front wall and the door, then the back wall and roof decking, the trim and finally the shingles. At the very end, the shed is painted.

The sheds available can be distinguished easily as they come in pale green that eventually fades into silvery grey. The Pressure treated sheds are relatively a bit costlier than the DIP treated sheds and the advantage of using them is that they don’t need further preservative treatment and can serve the whole during the entire ten years saving a lot of time and money.​
For strength, plan to build the front and back layers so the corners overlap each other. Then, to accommodate inset panels, make the front pieces a little wider to create a lip for the panels to rest against. Use plywood or tongue-and-groove boards for the panels, and hold them in with stops nailed on the back. You can assemble the two frames with pocket screws before gluing and screwing them together, but it’s not necessary. After the glue dries, plane or sand the edges to hide the fact that there are two layers.
Run! Do not walk away from this product! Total scam! The Ryan Shed Plans product promises 12,000 different do it yourself shed building plans. Instead what you get is a whole bunch of disconnected sketches, drawings, And partial blueprints that he has photo copied from hundreds of unrelated sources. I personally have several years of carpentry, homebuilding, and woodworking experience So I assumed that even if these so-called “shed building plans” we’re light on specific details I’d still be able to use them. WRONG! You will find that 99% of the“Plans“ are completely useless for the purpose of building a backyard shed. After an hour of grinding through the files included in that on my download, I did happen upon a singly reasonably complete building plan for a modest shed which included detail dimensions, material list, and the sorts of things needed to actually build a shed. Doing a little more research, I later found where this particular we’ll Drawn to plan had been ripped off from another legitimate Shed building website. Shame on you RyanShedPlans for marketing such a terrible, useless product. Judging from your online sales pitch you are clearly a gifted marketer. If you spent as much time developing a database of legitimate, usable shed plans as you did putting together your totally fraudulent marketing material, you would have an incredible product worth much much more then you’re charging. But I guess you I already know that.

This shed, one of our most popular outdoor storage sheds ever, features some unique details that make it look more expensive than it really was to build. Arch-top windows and a custom door give this shed a high-quality look that belies its low cost and simple construction. The panelized construction technique means you could build the parts in your garage on a rainy weekend and then haul them to the site for assembly. Modest finishes like OSB siding and composite trim and fiberglass shingles help keep the materials cost low. And you’ll save hundreds of dollars by providing your own labor to build the door and windows for some cheap outdoor storage. The modular construction and wood platform foundation mean you can construct this shed almost anywhere, even on remote or sloping sites. In this article, we’ll show you the basics of how to build the shed and install the windows and doors.
Would we do it again? I won’t sugar coat it, this is real life so probably not. Some things aren’t worth the aggravation or the stress. In the end, we didn’t save that much money by building the shed ourselves. I think the total cost was around $1200. But I can tell you one thing, if we are ever attacked by zombies or if there is an Armageddon I am hiding in the shed because the big bad wolf can huff and puff and nothing is taking this structure down. 
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
When you have around 12,000 plans that are claimed to be shed designs, not all of them can be good. Some of them are predominant, some of them are mediocre while some of them are utterly absurd and are even hard to read. There are even incomplete plans in the Ryan Shed Plans package, and many of these plans don’t include the materials, making it frustrating. The download pages of most of the designs in Ryan Shed Plans are not organized.
• The ceiling is too low — these may tend to be one of the least concentrated on problems as they happen least when one expects. It is important to be aware of the low ceiling so as to save on your funds in putting a higher one. Ensure that each and every measurement is taken carefully and is also executed. The best way to determine the height of your shed is by scanning through the items you are planning to store there and use the tallest. As mentioned earlier, the installation of steep roofs might be risky but in the long run become an added advantage as they create more space inside the shed.
They are the simplest and cheapest sheds one may find. They are easily assembled by regular people, they do not require initial construction knowledge. One may find the DIY kits and plans for these type of sheds. The most common type of sheds is plastic and wooden. They are mainly used to store garden tools, tractors and store items that are considered unsafe to be stored indoors such as gasoline and agricultural chemicals.
An inclusive guide as it is, it also acts like a woodworking course it contains detailed illustrations and instructions that help you in creating the shed right from the ground. Even if you are a beginner or a professional, these shed designs can be tackled by you and also will help you in being a long term woodworker. With more than 10,000 plans, the Ryan Shed Plans is the biggest collection you can find on the internet where you can choose from a collection of styles, materials, sizes and therefore it is a definite option for everybody.​
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.
First off, building your own shed through our free or PREMIUM shed plans means you are saving the cost of a professional. If you are wondering you have zero experience in wood working then you shouldn’t be worried; our plans come with precise instructions, material list, diagrams, instructions, etc. There would be absolutely nothing that would leave you wondering.
I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).
I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be. 
×