If you're always in a hurry and terrible with commitments, I might suggest you rent a storage space or continue parking your forty thousand dollar cars in the driveway and save your garage space for unused furniture, bicycles, unpacked boxes, garden rakes, and lawn mowers. Because, the biggest enemy in do-it-yourself is not the lack of carpentry skills or ability to follow directions, but lack of planning and failure to schedule the time it takes to get the job done.


But I've never drilled a pilot hole in my life, so what do I know. No seriously, unless it's super delicate or thin, I just use the impact driver and make it work. Sure, sometimes the wood splits a bit, but I don't care about looks and most of my projects are built with pallets and discarded stuff anyway. But the thought of predrilling every hole?? And messing a corded driver?? Come on dude, that's laughable!
Woodworking is an art, and like most art forms, it only require dedication, skill and time. Good thing you have our shed plans. You wouldn’t be spending months figuring out how to cut wood pieces, etc. You will get enough guidance to start right away and build a gorgeous shed for your garden. The benefit? You would learn how to build sheds within days. No experiments and no wasting time!
For a freestanding shed, you can build the shed on top of a concrete slab (see Pouring a Concrete Slab) instead of the pressure-treated skids and floor joists; this will actually result in a sturdier—more permanent— structure. Otherwise, for a freestanding shed, the foundation should be constructed on concrete piers or poured footings (see Pouring Concrete Footings & Piers).  Be aware that building on footings will raise the height of the shed up from the ground.
If your shed site slopes, pouring concrete is a bigger job because you have to build strong forms and pour extra concrete on the downhill side. A simpler method is to build your shed floor like a deck, with footings, posts and a wood frame covered by plywood. If you don’t like the opening under the shed, build a skirt to cover the space between the shed floor and the ground.
We provide outdoor shed plans that are affordable and easy to build from. Our storage shed plans are organized so that you can buy shed plans and build your own shed no matter what your skill level. There are helpful how to build instructions and tips that go along with each stage of the storage building process from the foundation, floor, walls to the roof. Building your own shed saves you money and is a very rewarding experience that adds value to your property. Click the shed images above to view our library of over 200 storage shed plans.

We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
There are many ways and methods of beginning a foundation for your shed, but so as to keep this manual simple we will begin by looking at the procedures followed while building a shed. The types of the foundation include a concrete slab foundation, a sunken pillar, and wood skid. The e-book is helpful to those who might not be interested in shed building from the scratch. It takes time to explain in detail the materials required and the step by step methods required to give one the moral to build the shed. It also explains the easy steps in a very fun way. Furthermore, the process of building your shed on your own is quite a fun task as one watches the shed start from nothing to something beautiful and useful. Isn’t that exciting? At least one feels useful after performing such type of a task that feels to be quite a huge burden. The following steps are derived from the e-book on steps used to build a foundation:
Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!

First off, building your own shed through our free or PREMIUM shed plans means you are saving the cost of a professional. If you are wondering you have zero experience in wood working then you shouldn’t be worried; our plans come with precise instructions, material list, diagrams, instructions, etc. There would be absolutely nothing that would leave you wondering.


One look at everything you receive with this program and there’s no way you’ll ever opt to pay someone tons of money to do the exact steps that you have right in front of you. Ryan’s Shed Plans is the smart, affordable and easy way to build whatever it is that you want in your backyard. Whether it’s a rustic yard shed, a cottage shed, a garden shed, a gambrel barn or something else, you finally have all the (actual) steps needed to easily build it on your own. The program comes with way more than just a couple of project plans. Instead, it provides with you 12,000 different shed plans to choose from. So, if you want a shed with glass walls or a shed that’s perched on a porch, there’s a plan for it.
Finding MyShedPlans seemed too good to be true; 12k shed plans, 3-D renderings, detailed material lists, but wait, there's more! Hundreds of useful guides, woodworking books, and project ideas ranging from birdhouses to bridges. And what was more, was the promise of an easy download and immediate access to boundless amounts of material so I could be right on my way to a sharp new shed.

The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.
@diy-plan: Thank-You for your best wishes on the Isacc, believe we always lose sleep when one is on the way. Your advice on not buying factory kit sheds I am 100% in agreement with, they are poor quality lumber, never pressured treated, steldom last more than ten years, here they are lucky to make it six years. I was asked to put one together by a friend after her son bought it for her as a gift, I almost had to rebuild it and when I was finished I thought what an ugly building. Five years later it had termites. When a shed is built on a wood base the base must be anchered into the earth, I have seen sheds flipped upside down after a storm when they are not anchored. I built a shed for a workshop a few years ago to build custom canoes in it, to make it storm ready I used OSB under the siding, then cross braced the studs, insulated it, then covered the studs on the inside with 5/8 inch plywood. The windows have storm shutters that I built for them, if this building fails in a storm I hope I am near the Canadian border.
We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.

Level the ground (if necessary) and install deck piers along a grid to support the shed. The piers will allow you to string support beams beneath the floor of the shed. In the example design, the piers are spaced 6 feet (1.8 m) apart in one direction and 4 feet (1.2 m) apart in the other for a total grid area of 12 x 8 feet. This is convenient because once you lay supports along this grid, it will take exactly three standard 4- by 8-foot plywood sheets to cover it.[1]
Nothing dresses up a shed like brackets. They’re the ultimate low-effort, high-impact feature. In some cases they also provide extra support for your gable-end overhang. Depending on the design, you can build brackets from 4x4s or by laminating 2-by boards. Make a full-scale drawing to work out the details. Then build the brackets and attach them to the shed. Install the brackets tight to the underside of the overhang, and then notch the fascia board to fit over them.
The last project we want to share with you today is a greenhouse/ garden shed which we found on lizmarieblog. It’s really cute and inside you can find shelves, storage compartments and a bunch of other practical things. In addition to all that, this lovely shed even has a chandelier. It’s a decorative element and it really elevates the decor to a whole new level.
In a Vero Beach, Florida, midcentury modern neighborhood, Sanders Pace Architecture retained the lines and essence of the original house while redesigning it for their client's 21st-century lifestyle. Although it's at the front of the house and initially might resemble a garage, the detached "shed" can be used as a private studio or for guests. Because it's located on the coast, hurricane-proof doors were needed, but cedar was installed over them for an attractive but sturdy structure.

For strength, plan to build the front and back layers so the corners overlap each other. Then, to accommodate inset panels, make the front pieces a little wider to create a lip for the panels to rest against. Use plywood or tongue-and-groove boards for the panels, and hold them in with stops nailed on the back. You can assemble the two frames with pocket screws before gluing and screwing them together, but it’s not necessary. After the glue dries, plane or sand the edges to hide the fact that there are two layers.
If your shed site slopes, pouring concrete is a bigger job because you have to build strong forms and pour extra concrete on the downhill side. A simpler method is to build your shed floor like a deck, with footings, posts and a wood frame covered by plywood. If you don’t like the opening under the shed, build a skirt to cover the space between the shed floor and the ground.
@diy-plan: Thank-You for your best wishes on the Isacc, believe we always lose sleep when one is on the way. Your advice on not buying factory kit sheds I am 100% in agreement with, they are poor quality lumber, never pressured treated, steldom last more than ten years, here they are lucky to make it six years. I was asked to put one together by a friend after her son bought it for her as a gift, I almost had to rebuild it and when I was finished I thought what an ugly building. Five years later it had termites. When a shed is built on a wood base the base must be anchered into the earth, I have seen sheds flipped upside down after a storm when they are not anchored. I built a shed for a workshop a few years ago to build custom canoes in it, to make it storm ready I used OSB under the siding, then cross braced the studs, insulated it, then covered the studs on the inside with 5/8 inch plywood. The windows have storm shutters that I built for them, if this building fails in a storm I hope I am near the Canadian border.
There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.
We make great shed plans.  It’s all we do and we love it! All of our shed plans are available to download instantly at checkout. There isn’t an easier shed plan checkout process on the web!  When you buy a plan from us, you are guaranteed a great plan at a great value.Every one of our 200+ plans are easy to build thanks to our thorough and easy to follow instructions. All of our shed plans come with more information compared to the competition. Things like a tool list, a cut list, and a material list in excel format are all included.
The DIY shed plans come in various sizes and shapes, few of them even with a little porch. They have a beautiful natural appearance to fit perfectly into your garden or backyard. As are the advantages of all types of small house plans, our outdoor sheds are also designed to be simple, durable, low-cost and to work effectively with a space. If you are creative mind yourself, our plans can serve as a sole inspiration for your own garden sheds designs.

Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.

I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!


There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
When you open them on the computer, you have to fill them up and make them organized as the PDFs and Ebooks are either in not very compatible format like you have to rotate them the right way every single time. The product is not exactly disappointing on a whole, but with so many blueprints it is tough to find which one is good and which one is not as you have to go through all of them to decide that.​
Copyright © 2019 HubPages Inc. and respective owners. Other product and company names shown may be trademarks of their respective owners. HubPages® is a registered Service Mark of HubPages, Inc. HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.

I just want to let you know that your Driver was a pleasure to deal with. He placed the shed perfectly into a tight spot and then took the time to make sure it was level and sitting properly. I feel any other company would of placed it as close as possible to where i wanted it and would of been on their way. He also noticed (I would of never noticed) that the door didn't line up perfectly when closed and made some adjustments.
To make it easier for you, the “do-it-yourself” storage shed kits are for sale partially prefabricated to make the assembly of the shed barn kit simple and straightforward. The DIY storage shed kit walls are assembled and the rafters are prebuilt and ready to put into place. While we offer large shed kits as well as small barn kits, on the smaller 6′ and 8′ shed kits, the floor may be partially constructed to make the job even easier.
· Garden office shed — it is a type of shed which you can build when you need to find time for yourself and also to carry out your own activities. You can carry out your office activities from here since there are no distractions. They are suitable for people with large families and would like to get away from all the noise and distractions that may hinder someone from working smoothly.

These plans are for saltbox roof style sheds.  They are built with trusses that you build.  These sheds are perfect for general storage, garden sheds, tool sheds, potting sheds, playhouses and more.  This shed in my opinion, if you are wanting to build a shed for gardening, this is the one.  It has lots of charm and character with it's desirable design.

For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.
Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.[5]

how to build a shed

×