My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer.
I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.
You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
The last thing you want is to build a shed only to discover that it’s too small to hold your stuff, handle your hobby, or otherwise meet your needs. By the same token, you don’t want a shed that’s so large it overwhelms your property and looks ungainly behind your house. Choosing the wrong size shed is a common homeowner error, but LP Outdoor Building Solutions’ handy tool helps you get it just right. Check it out, and you’ll see that size does matter!

This shed, one of our most popular outdoor storage sheds ever, features some unique details that make it look more expensive than it really was to build. Arch-top windows and a custom door give this shed a high-quality look that belies its low cost and simple construction. The panelized construction technique means you could build the parts in your garage on a rainy weekend and then haul them to the site for assembly. Modest finishes like OSB siding and composite trim and fiberglass shingles help keep the materials cost low. And you’ll save hundreds of dollars by providing your own labor to build the door and windows for some cheap outdoor storage. The modular construction and wood platform foundation mean you can construct this shed almost anywhere, even on remote or sloping sites. In this article, we’ll show you the basics of how to build the shed and install the windows and doors.
• Purchase of two small sheds — it is dangerous to underspend just as it is to overspend. This is because you may underspend and the shed purchased may end up being of little use below your expectations. This will prompt you to build another shed and that will lead you to overspend. A shed may look simple on the outside but it is how you customize your shed that will determine the volume of goods your shed can hold. When building your shed it is important you identify each and every section of your shed, allocate the tools to each section and then modify the shed to hold each and every tool at its place. In that manner, you end up maximizing each and every space in your shed and also utilizing your shed to its maximum capability. It is also recommendable to have adequately spaced sheds where one can perform outdoor activities like car repairing in the shed when the weather is not favorable. Before starting your shed building, think of all its purposes and all the outdoor and semi-outdoor activities one could perform during unfavorable weather condition or any other related circumstances.
Building a shed is more or less like building a miniature house. It can be a pretty fun project, especially if you have someone who can help. If you’re new at this, we found the perfect tutorial for you. Be sure to check out these shed plans that we found on popularmechanics. The whole process is described in detail, with instructions, lists of supplies needed for each part of the project and useful tips.
Stand the back wall. Then align the corner of the side and back walls and nail them together. With a helper on the outside of the shed to push if necessary, line up the inside edge of the bottom plate with the chalk line and nail it to the platform. Continue around the building, standing the opposite end wall and finally the front wall. Nail the corners together, making sure that the top plates of adjoining walls are flush with each other.
Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
The roof trusses support the plywood and shingles that make the roof waterproof.  They are very important to plan carefully because they require strange angles and they have to fit the structure below them.  We gave our shed a slight awning and this had to be accompanied by the trusses, which overhang the walls of the shed by about a foot on each side.  When constructing your joists it is important to use joist plates otherwise the angles that you so carefully planned will not remain true for very long.  We used a 2x4 to support the joists while we were attaching them to the walls.

We’re not going to tell you that all pre-made sheds are bad. On the contrary, if you spend enough money, you can buy a pre-made or so-called ‘flat-pack’ shed and it’ll last you a very long time. However, buying a pre-built shed will cost you double, triple or even quadruple what it would cost you to build your own. DIY sheds are cheaper to build than pre-made sheds, and because you are building them yourself from scratch, you can be sure of the quality. This is a key point, because with a pre-made or flat-pack shed, you can never be sure that the lumber being used is of good quality, or even if it came from sustainable sources (if that’s important to you).You can also put your mark on a shed you build yourself. Feel free to mark the lumbar you use to show off your workmanship, and feel free to modify the design of the shed however you like. You won’t be constrained by building your own shed either, meaning you can add shelves and intricate design features as you go along. Until now, the only option you had was to hire a professional to build your shed since you never had the knowledge to do so. But, today is your lucky day! Welcome to 3DSHEDPLANS™, where we offer gable, lean-to and hip shed plans that come with a complete list of tools, accessories, hardware and material you would require to do the job yourself. And, it’s not that difficult at all! Our plans come with detail instructions, 3D dimensions, list of materials and even highlighted points where you need to nail to attach the lumber. What else would you require to start working on your shed right away?
Remember that anything you build will either add or detract from your property's appearance and may impact your property value. Metal and vinyl materials may be easier to maintain, but are the least expensive options and tend to look cheap. Natural wood and prefinished wood products will add character and value, but are typically more expensive to buy and maintain.
If you're always in a hurry and terrible with commitments, I might suggest you rent a storage space or continue parking your forty thousand dollar cars in the driveway and save your garage space for unused furniture, bicycles, unpacked boxes, garden rakes, and lawn mowers. Because, the biggest enemy in do-it-yourself is not the lack of carpentry skills or ability to follow directions, but lack of planning and failure to schedule the time it takes to get the job done.

When I tried my first woodworking project, all I wanted to is quit it even before I completed and most of my measurements went wrong, leaving me frustrated. Are you the same? Did you waste the materials, resources, money, time and energy doing it? Have you been to the DIY stores only to come back with hopeless things that turned out to be unfit taking around half a year or an entire year to complete the wooden shed? To change that, you should avoid the doubling over of materials, shorten the time and reduce the invested energy as well.​
This site is owned and operated by Sinova Enterprises LLC. Sinova Enterprises LLC is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Sinova Enterprises LLC also participates in affiliate programs  and is compensated for referring traffic and business to these companies.
When you open them on the computer, you have to fill them up and make them organized as the PDFs and Ebooks are either in not very compatible format like you have to rotate them the right way every single time. The product is not exactly disappointing on a whole, but with so many blueprints it is tough to find which one is good and which one is not as you have to go through all of them to decide that.​

This 8×15 shed from Lifetime is entirely constructed in the USA, and comes equipped with two shatter proof windows, shutters, and side entry with 6 skylights for stunning illumination within. The powder coated steal A frame roof trusses and reinforced steel internal wall structure are made of durable polyethylene. The high grade metal screws make it incredibly easy to assemble this shed. Additional airflow is provided by the peak screen vent cap. You also get the added benefit of UV-protection that helps to prevent fading and cracking over time. This storage unit can be used year-round and comes with a fantastic 10 year limited warranty from the manufacturer. The floor of this unit is built so tough that it will never crack, peel, or chip. It’s also slip-resistant and resistant against stains, oils, and solvents. All in all, this is a fantastic shed for those looking for something that is built tough and built to last.
Apparently, most guides provide you with the same old information that doesn’t offer any benefits to a gardening or DIY enthusiast. Fortunately, you can benefit from programs like My Shed Plans. This exceptional program is easily available on the internet at an affordable price, and helps you learn everything about building a shed in your garden or backyard.

Now that the skeleton of your roof is ready, it’s to go pro. You will be adding roof felt and shingles to make your roof robust, resilient and obviously good looking. Metal roof sheets, fiberglass and felt are some of the basic options you have. Feel free to use any material you like for the roofing. However, we recommend using felt since it is easier to work with and install, and is highly weather and water resistant.
The roof trusses support the plywood and shingles that make the roof waterproof.  They are very important to plan carefully because they require strange angles and they have to fit the structure below them.  We gave our shed a slight awning and this had to be accompanied by the trusses, which overhang the walls of the shed by about a foot on each side.  When constructing your joists it is important to use joist plates otherwise the angles that you so carefully planned will not remain true for very long.  We used a 2x4 to support the joists while we were attaching them to the walls.

The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.


I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).
Ø Large sheds — they are larger in size compared to the other type of sheds we have mentioned above. They have enough space that one can accommodate outdoor tools and still carry out activities. They can be used as offices. However, if used as an office, one will have to be careful while carrying out their activities to avoid substances that may hurt or prick them as they are moving around.
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.
Siding panels made from oriented strand board cost far less than solid wood or plywood panels, and come preprimed, saving you money and labor. Since the panels are also structural, you don’t need an additional layer of sheathing under the siding. You’ll save about $500 over the cost of cedar plywood siding. It’s the perfect material for constructing inexpensive storage sheds.
Apart from being a space to keep your garden equipment and tools safe and dry under the roof, there are numbers of other possibilities how to use our timber structures and DIY shed plans. You can create a kids play area, a detached study, an additional storage space, tiny studio or a little secret relaxing spot. No matter what purpose our shed plans for sale will have in your life, they will always be a lovely addition to your home. Also the shed plans prices are very friendly.

This shed, one of our most popular outdoor storage sheds ever, features some unique details that make it look more expensive than it really was to build. Arch-top windows and a custom door give this shed a high-quality look that belies its low cost and simple construction. The panelized construction technique means you could build the parts in your garage on a rainy weekend and then haul them to the site for assembly. Modest finishes like OSB siding and composite trim and fiberglass shingles help keep the materials cost low. And you’ll save hundreds of dollars by providing your own labor to build the door and windows for some cheap outdoor storage. The modular construction and wood platform foundation mean you can construct this shed almost anywhere, even on remote or sloping sites. In this article, we’ll show you the basics of how to build the shed and install the windows and doors.
Since outdoor space is limited in a big city, everyone knows you must make smart use of vertical real estate. For a greenhouse/shed in San Francisco's Bernal Heights, Step 3 Studio designed in an open-framework structure that provides shelter for a garden shed that stores potting materials and plants on the ground floor. A steel staircase was built on site, which leads to a second level surfaced in steel grid mesh. The higher elevation is the perfect spot for container plants that require more sun. It's also a nice place to hang out and enjoy views of the city, day or night.
Did we forget to mention that when you work on the shed yourself, you have the freedom of using the material you want? For instance, if you buy a shed building kit, you will simply be limited to the material that comes with it. But, when you are building the shed yourself, you have all the freedom in the world to pick and choose whatever you like. However, considering you don’t have much experience with building sheds, how would you know what material is better suited? Well, that’s where our free and premium plan come into play. Our plans come with complete lists of materials, hardware and tools that you would require to build the shed alongside their required quantity. We also suggest any alternate material that you can buy if anything is unavailable. You can add the type of doors you want or the windows while we give you the dimensions and how to work around them. Our plans are simple yet powerful and they help while you build your dream shed.

By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.
We are architects inspired by the tiny house movement and its philosophy. The ideals of downsizing the space we inhabit in order to achieve a minimalistic and simple living have always been close to us. Therefore, we specialize in designing micro homes plans. Tiny houses, cottages or cabins, but also playhouses or DIY shed plans, where we can fulfil our love for simple, space-effective and practical solutions. Ideal properties of wooden shed blueprints, don’t you agree?
Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.
Now, imagine a price you think you might have to pay for such a comprehensive package – sure you will think not less than a few hundred at least. The good news is that Ryan is offering all of it at an unbelievable price of just $37. I am sure you were quite blown away when you heard about the quantity and quality of the shed plans and the bonuses you would be getting with them. So, doesn’t $37 for so many useful resources on woodworking sounds like a great idea. In my opinion, surely it is. Once, you have this collection in your arsenal, you are never going to run out of ideas. That is assured.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!

2012: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2013: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2014: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2015: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2016: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2017: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2018: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12  |  2019: 1, 2, 3, 4, 5,
It's a work in progress and likely a labor of love for Rob, aka Weekend Shed Head, who chronicles the construction of his backyard man cave in Nottingham, England, on his Instagram account and YouTube channel. An experienced and enthusiastic do-it-yourselfer, he sort of makes things up as he goes along and seems to know what he's doing. Along the way, Rob posts photos of train stations, the curry dinners and full English breakfasts he cooks, and charming flowers and decor in the garden.

We have a large selection of small horse barn plans, tack rooms and run in shed plans. Each of our designs comes with a materials list and construction plans to help you save time and money when you build. We have many different sizes of horse barns including one, two, three and four stalls. Most of the barns and run in sheds are designed to be built with pine board and batten siding on the outside and a 4' tall Oak kick board on the interior.
We have a large selection of small horse barn plans, tack rooms and run in shed plans. Each of our designs comes with a materials list and construction plans to help you save time and money when you build. We have many different sizes of horse barns including one, two, three and four stalls. Most of the barns and run in sheds are designed to be built with pine board and batten siding on the outside and a 4' tall Oak kick board on the interior.

Would we do it again? I won’t sugar coat it, this is real life so probably not. Some things aren’t worth the aggravation or the stress. In the end, we didn’t save that much money by building the shed ourselves. I think the total cost was around $1200. But I can tell you one thing, if we are ever attacked by zombies or if there is an Armageddon I am hiding in the shed because the big bad wolf can huff and puff and nothing is taking this structure down. 
Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
I have recently purchased a house with an older roof that needs to be restored soon. So, I am trying to decide on I should go with a metal roof other than shingles. If I install metal roofing over solid decking such as OSB or plywood, integrate with a properly insulated garret, there is very little noise difference compared to standard asphalt shingles. I have briefly read benefits and drawbacks of Metal roofing but as I listed before I should go to metal roofing and hiring a roofing contractor no matter its expensive or noisy anyhow, Your article has cleared a lot of misinterpretation I’ve had before.
The slanted roof of a modern house in the San Francisco Bay Area is echoed in this small wooden tool shed. Conceived by Astrid Gaiser Garden Design, the shed becomes an interesting part of the landscape design instead of something tucked or hidden in a corner or side yard. Gaiser even added a chalkboard for kids and adults to draw and write messages.

My Shed Plans just might be every do-it-yourself junkie’s dream product. Ryan Henderson, the creator of My Shed Plans, has been building one-of-a-kind outdoor sheds for more than 20 years. If you believe his story, he has unselfishly decided to share his love of woodworking and carpentry through his guides which will enable the everyman who does not have handyman experience to build their very own outdoor shed. Can it be true?
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
×