Build rafters across the roof and separate them with blocking. These should overhang the walls of your shed for increased weather protection. Again, your measurements will be greatly simplified if you space the rafters the same way that you spaced your floor joists. When you’re done, attach pieces of blocking between each pair of rafters along the top plates.[10]

A 1964-built Eichler home was bought in original condition with vintage appliances, fixtures, and finishes. The new owners wanted to retain its iconic midcentury modern design but requested that Gast Architects make some updates to create a calm, light-filled, and inviting home. Gast strived to preserve the signature finishes of the house while creating a larger, more modern kitchen, opening up the floor plan, and updating the master suite. The shed in the backyard repeats the lines of the main house, resembling a mini Eichler.
Build your own shed and you'll instantly have increased space for your tools, a place to work on DIY projects and a way to keep your garage free of clutter. There are many shed plans online that show you how to build your own shed from scratch using wood. It may be easier, however, to use a kit to create a resin, metal or plastic shed instead. A storage shed kit contains all the materials you need including trim. This Home Depot project uses the Keter Stronghold Resin Shed Kit to show you how to build a shed from a kit. We also offer a large variety of other types of shed designs to choose from. Like most, this DIY shed requires tools like a power drill and step ladder to put it together, but assembly instructions will vary by kit. Make sure to follow the manufacturer's instructions carefully.
The roof panels are heavy and a bit awkward, so round up three strong helpers for this part of the job. Move the panels into position and lean them against the front and back walls. Then set up ladders inside the building for two helpers and push one of the panels up to them. Slide the panel up the roof until the bird’s-mouths drop over the top plate of the wall.

Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up. However, if this is not possible with the design you’ve chosen, simply nail them downwards through the plywood and joists or toenail them into place by driving the nails downwards and at an angle. Note that you will probably need other people to help you hold the wall structures up until they can be attached to one another.[9]
Woodworking is an art, and like most art forms, it only require dedication, skill and time. Good thing you have our shed plans. You wouldn’t be spending months figuring out how to cut wood pieces, etc. You will get enough guidance to start right away and build a gorgeous shed for your garden. The benefit? You would learn how to build sheds within days. No experiments and no wasting time!

The toughest and most important part of building a shed is finding the right plans. Sure you can just start building without plans, but do you know how it will look when you are done? Or you can search for free plans, but are they designed right? What I recommend is finding plans, even if it means you have to pay a little. Make sure that sample plans are provided so you know what you are getting. Do not make a purchase just because they show lots of nice sheds but no sample of the actual plans you will be buying. Look for the following before you decide to purchase:
• Failure to account for climate — some people build sheds without considering the weather patterns experienced in the area. The shed ends up being exposed to harsh climatic conditions, continued exposure of the shed to such adverse climatic conditions lead to its destruction. This then leads to one spending much more money to repair the shed. The most common way in which people fail to protect their sheds from is rainwater and snow by failing to have the necessary protecting tools such as gutters and drainage trenches. Gutters are important as they direct rainwater away from the shed hence protecting the shed from getting destructed by rainwater and melting snow that is on the roof. Drainage trenches direct the water that falls directly to the ground away from the shed. These methods keep the wood used to build the sheds dry and hence they do not absorb moisture that may encourage the growth of fungi on the wood. As we have seen earlier, it is also important to coat the wood with protective coats as paint to prevent them from coming into any contact with moisture.
For $37, I’d say that My Shed Plans is worth giving a try. There’s nothing more rewarding than having the freedom to pick your own shed design and building it with your own two hands. Taking a different route to building a shed will probably yield less than desirable results, and where would you even start? You could easily rack up $37 in mistakes and wasted time and effort just trying to freestyle it.

• Failure to account for climate — some people build sheds without considering the weather patterns experienced in the area. The shed ends up being exposed to harsh climatic conditions, continued exposure of the shed to such adverse climatic conditions lead to its destruction. This then leads to one spending much more money to repair the shed. The most common way in which people fail to protect their sheds from is rainwater and snow by failing to have the necessary protecting tools such as gutters and drainage trenches. Gutters are important as they direct rainwater away from the shed hence protecting the shed from getting destructed by rainwater and melting snow that is on the roof. Drainage trenches direct the water that falls directly to the ground away from the shed. These methods keep the wood used to build the sheds dry and hence they do not absorb moisture that may encourage the growth of fungi on the wood. As we have seen earlier, it is also important to coat the wood with protective coats as paint to prevent them from coming into any contact with moisture.
Remember that anything you build will either add or detract from your property's appearance and may impact your property value. Metal and vinyl materials may be easier to maintain, but are the least expensive options and tend to look cheap. Natural wood and prefinished wood products will add character and value, but are typically more expensive to buy and maintain.
×