We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
Pasadena, California, is known for its Craftsman style homes, a great number of which have been carefully preserved and restored. Owned by a University of Southern California (USC)-educated architect, Nott & Associates specializes in the Craftsman style. For a backyard shed, Nott custom designed and constructed the wooden doors, which include period-perfect details and hardware.
We assembled each layer with pocket screws before gluing the two layers together, but if you don’t own a pocket hole setup, you could simply screw through the overlapping boards instead. Complete the door frame. Then cut the 4 x 8-ft. grooved plywood to fit the lower recess, and cut a piece of 1/4-in. acrylic sheet to fit the upper recess. Secure the plywood and acrylic sheet with 1/2-in. x 1/2-in. moldings nailed to the inside. Sand the edges of the door flush.
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.[5]
• Improper geographical placement — this is one of the huge mistakes one may make while shed building. It may be too close to your house hence obstructing your beautiful view from your living room or your kitchen as you are cooking. The last thing one would want is not like your house because of a simple thing as a view, so be careful with where you place your shed. One may also build the shed too far away from their house which again is an inconvenience. Who would want to walk from your house to your shed to get some tool you need and you have to trek some long distance? You may also need your shed someplace you can see due to the security reasons. You would want some stupid thief taking your stuff without you see them, would you? Or walking down a snowy lane during a chilly night just so you could get something from your shed. Before building your shed consider all the factors whether positive or negative and then come up with the place in your compound with the most advantages compared to disadvantages.
The best spot for a shed is level, well-drained ground close to where you work in your garden or yard. The location doesn’t need to be perfectly flat; the foundation design shown in the plans allows for adjustments to make the floor level. Small sheds require only a top-of-soil foundation, even in locations with freezing winter temperatures. Precast concrete deck blocks work perfectly for this.
×