The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
At MOTHER EARTH NEWS, we are dedicated to conserving our planet's natural resources while helping you conserve your financial resources. You'll find tips for slashing heating bills, growing fresh, natural produce at home, and more. That's why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.95 (USA only).

BBB Business Profiles are provided solely to assist you in exercising your own best judgment. BBB asks third parties who publish complaints, reviews and/or responses on this website to affirm that the information provided is accurate. However, BBB does not verify the accuracy of information provided by third parties, and does not guarantee the accuracy of any information in Business Profiles.
• Purchase of two small sheds — it is dangerous to underspend just as it is to overspend. This is because you may underspend and the shed purchased may end up being of little use below your expectations. This will prompt you to build another shed and that will lead you to overspend. A shed may look simple on the outside but it is how you customize your shed that will determine the volume of goods your shed can hold. When building your shed it is important you identify each and every section of your shed, allocate the tools to each section and then modify the shed to hold each and every tool at its place. In that manner, you end up maximizing each and every space in your shed and also utilizing your shed to its maximum capability. It is also recommendable to have adequately spaced sheds where one can perform outdoor activities like car repairing in the shed when the weather is not favorable. Before starting your shed building, think of all its purposes and all the outdoor and semi-outdoor activities one could perform during unfavorable weather condition or any other related circumstances.

How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.


To make it easier for you, the “do-it-yourself” storage shed kits are for sale partially prefabricated to make the assembly of the shed barn kit simple and straightforward. The DIY storage shed kit walls are assembled and the rafters are prebuilt and ready to put into place. While we offer large shed kits as well as small barn kits, on the smaller 6′ and 8′ shed kits, the floor may be partially constructed to make the job even easier.

At MOTHER EARTH NEWS, we are dedicated to conserving our planet's natural resources while helping you conserve your financial resources. You'll find tips for slashing heating bills, growing fresh, natural produce at home, and more. That's why we want you to save money and trees by subscribing through our earth-friendly automatic renewal savings plan. By paying with a credit card, you save an additional $5 and get 6 issues of MOTHER EARTH NEWS for only $12.95 (USA only).
A saltbox shed is defined by its double sloping roof style. The front roof has a steep slope of 12/12, and the rear roof has a lower slope of 5/12. Most plans have options for the doors on either the front or side. Click on the images to view more details. The saltbox style evolved from the practice of extending the second floor roof line down to the first floor level to create additional covered living space. The design adds a south eastern flair to back yard shed designs.
Now you have finished your shed!  Once your doors are on, you can add latches and locks.  The windows on our shed are made of 1/4 inch thick plexiglass held in with white silicone to match the trim.  The floor was finished with concrete tiles. You can now choose to leave the inside of your shed barren, to say, store a few larger items, or you can add shelves like we did.  We added the shelves because we had a lot of small boxes and things that we wanted to move out of the garage.  They are made from 7/16 inch thick oriented strand board and 2x2s.  The shelves in the middle have some spare 6x6 chunks keeping them up, which is suitable because they are the deepest and are designed to hold the heaviest items.  They are so strong that you can climb on them, even jump on them!  We also added a bike rack on the right hand side that can hold our five bikes.  The finishing touch on the shed was to add an electrical outlet and a flourescent lighting fixture with a switch.  There is a vent in the back wall for warm summer days but it is probably unneccesary.  Hopefully you can build your own storage shed and de-cluterize your life as well.  Thanks!
Building a shed has lots of advantages which can vary for each person. For example, you could use the shed as a storage space for bicycles in winter. Another option is to use the shed as a storage space for large equipment like the lawnmower or the garden tools. You could also use the shed as a workspace whenever you’re doing DIY projects which is quite funny because the shed itself can be one such project. If you’re the recycling type, you can put a hatch on the side specifically for this purpose and place the bins inside. In any case, a sturdy shed can serve you for many years to come and the shed plans offered on todaysplans show you how to ensure that.
As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.

The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.
As we have seen there are numerous design which you may use to build yourself a shed of your choice. The truth is there are numerous shed designs which come up every year which we cannot discuss details but only mention them. These examples of sheds include attached firewood storage, Ivy, Windows, Double door, Decorative door, Porch, Shutters, End entry side entry and many others.

I don't waste my time on free plans, store-bought sheds, or ready-made, mail order kit solutions... been there, done that. Free means lack of user feedback and you get absolutely no customer support. With store-bought and ready-made mail order sheds: they're flimsy, profit-driven solutions that I've always had to tear apart and modify too much to get the storage space to work or to match the character and style of the home.
• Spending too much money on unnecessarily expensive sheds — sheds the main purpose is to house outdoor and garden tools that cannot be stored in the house. Some people spend a lot of their money on large and stylish sheds which to my opinion in unnecessary. Spend your money wisely. You can save a lot of money on shed building by avoiding to hiring a huge manpower in the construction. You may even save some of your money by enquiring price rates of the items you need at various lumberyards, you will be able to know who have the best quality products at affordable prices.
For example, the last three sheds I built were trimmed with white PVC trim boards instead of painted cedar 1 x 4s. This new plastic lumber, which I used for the rake, fascia, frieze and corner boards, is impervious to bugs, warping, splitting or decay, and it never needs painting. Other low-maintenance options include: vinyl or aluminum windows, faux-slate roof shingles, fiberglass or steel doors, composite decking for steps, and fiber-cement siding. (I don't usually recommend aluminum or vinyl siding for sheds; neither material is rugged enough to survive the inevitable beating outbuildings take.)
If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.
Because the shed is designed to abut to another structure, the foundation need only be pressure-treated skids, the roof pitched in only one direction to shed water, and the back wall sheathed with 1/2-inch CDX plywood, which withstands indirect exposure to moisture. See Anatomy of an Outdoor Shed or Playhouse for more about typical shed construction.
×