Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.

DIY Shed Plans


A shed is a simple roofed single floor structure that is used for storage of garden tools, shelter domestic animals, performing out hobbies and also as a workshop. They can also be referred to as outhouse, outbuilding or shack. They are mostly situated in the back garden. Sheds vary in their sizes from large sheds to small sheds depending on their purposes. Storage sheds are mostly small in size but industrial and farm sheds are mostly large depending on the volume of the goods they hold. Sheds can be built from different materials like wood, metals, and plastic. The types of shed construction include metal sheathing, plastic sheathing, and complete wood construction.
• Stagnant waters — As much as the wood is coated to protect it from water, it would still be advisable to keep the wood away from stagnant waters. This is as the wood coating is not a permanent coat and so is the wood is exposed to water it will get damaged over time. The best way to avoid water paddles near the shed is building gutter systems on its roof which directs the water to a tank or a pool.

Pasadena, California, is known for its Craftsman style homes, a great number of which have been carefully preserved and restored. Owned by a University of Southern California (USC)-educated architect, Nott & Associates specializes in the Craftsman style. For a backyard shed, Nott custom designed and constructed the wooden doors, which include period-perfect details and hardware.

It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
Now you have finished your shed!  Once your doors are on, you can add latches and locks.  The windows on our shed are made of 1/4 inch thick plexiglass held in with white silicone to match the trim.  The floor was finished with concrete tiles. You can now choose to leave the inside of your shed barren, to say, store a few larger items, or you can add shelves like we did.  We added the shelves because we had a lot of small boxes and things that we wanted to move out of the garage.  They are made from 7/16 inch thick oriented strand board and 2x2s.  The shelves in the middle have some spare 6x6 chunks keeping them up, which is suitable because they are the deepest and are designed to hold the heaviest items.  They are so strong that you can climb on them, even jump on them!  We also added a bike rack on the right hand side that can hold our five bikes.  The finishing touch on the shed was to add an electrical outlet and a flourescent lighting fixture with a switch.  There is a vent in the back wall for warm summer days but it is probably unneccesary.  Hopefully you can build your own storage shed and de-cluterize your life as well.  Thanks!

• The ceiling is too low — these may tend to be one of the least concentrated on problems as they happen least when one expects. It is important to be aware of the low ceiling so as to save on your funds in putting a higher one. Ensure that each and every measurement is taken carefully and is also executed. The best way to determine the height of your shed is by scanning through the items you are planning to store there and use the tallest. As mentioned earlier, the installation of steep roofs might be risky but in the long run become an added advantage as they create more space inside the shed.


Because the shed is designed to abut to another structure, the foundation need only be pressure-treated skids, the roof pitched in only one direction to shed water, and the back wall sheathed with 1/2-inch CDX plywood, which withstands indirect exposure to moisture. See Anatomy of an Outdoor Shed or Playhouse for more about typical shed construction.
I'm on my third Central vac over a period of 15 years. All have been Kenmore. I have a 2500 sq ft home, I vacuum every day. Aways burn out the power head, hence why I am shopping again. I have flooring & carpet throughout. I want lots of power& a hose that doesn't kink (what a pain that has become) I refuse to spend more than $700, as they just don't last. Any suggestions? I've been checking out Electrolux........
Door placement is also important. You often see doors placed on the gable end of the building, which looks nice, but makes it virtually impossible to reach items stored at the rear of the shed. A better alternative is to put the door on the long side wall, so that you'll be able to access items to the right, left and back. Another option is to install doors on both gable-end walls, so that you'll be able to easily reach items from either end of the shed.
Hello Instructables!  This is my entry into the Shopbot Contest.  This Instructable will show you the steps to building your own shed.   We decided that our shed would be for storage because we wanted to get some stuff out of the garage so we can use it as a shop.  One of the challenges of building a shed in our backyard was that the ground was sloped in the area that we wanted to put it, so we had to find a way to get around that.  Another was that we are building beside some well established trees, and we didn't want to harm their root structure.  This is why we went with cinderblock and mortar rather than poured concrete.
The sheds available can be distinguished easily as they come in pale green that eventually fades into silvery grey. The Pressure treated sheds are relatively a bit costlier than the DIP treated sheds and the advantage of using them is that they don’t need further preservative treatment and can serve the whole during the entire ten years saving a lot of time and money.​

In reality, the Ryan Shed Plans also known as MyShedPlans Elite; is a huge collection of different wood construction plans, craft designs, shed blueprints, storage shed designs, birdhouse designs, garage designs, rocking horse sheds and even the end table designs. All the plans that are contained in Ryan Shed Plans contain step by step instructions like you have expected, and therefore, these are more than just mere designs. They naturally include a variety of blueprints of the same shed design the plan, the elevations, the sections, perspective of the shed, a description, legend containing the materials, tips and tricks but a few of them admittedly are not as designed as the rest.​

No shed, regardless of how well it's built, will last long if it's set on a weak base. Most sheds can be supported by an on-grade foundation, which consists of solid concrete blocks or pressure-treated wood timbers set directly on the ground. The concrete blocks or timbers (aka skids) must be leveled and spaced closely enough to properly support the shed's floor frame. Note that it's important to use solid concrete blocks, not hollow wall blocks, which can easily crack.

Ryan Henderson seems pretty straightforward and confident about his product. There are no outrageous claims that have been made, like building a shed in 15 minutes, and all the expectations on the website are pretty realistic. You won’t feel the need to question the product, as the website is very detailed, making it seem like they only want their consumers to be well-educated on the sheds they decide to make.
The variety of different shed designs is huge so no wonder you might be feeling stuck with finding the best shed plans – especially if you’d like to find shed plans free and available for instant download. Well, don’t worry any longer since we’ve compiled together the absolute best small shed plans and garden shed plans. These premium-quality free plans are all you need for building the perfect shed for your home!
We make great shed plans.  It’s all we do and we love it! All of our shed plans are available to download instantly at checkout. There isn’t an easier shed plan checkout process on the web!  When you buy a plan from us, you are guaranteed a great plan at a great value.Every one of our 200+ plans are easy to build thanks to our thorough and easy to follow instructions. All of our shed plans come with more information compared to the competition. Things like a tool list, a cut list, and a material list in excel format are all included.

A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.


After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.

How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
3 The frame of the roof consists of four 2-by-4 rafters cut so that they rest on the front- and rear-wall top plates, as shown in the rafter detail at right. Install a gable stud directly over the center studs on both side walls to fit between the end rafter and the top plate. Install the sub-fascia and then the fascia to the front ends of the rafters.
Run! Do not walk away from this product! Total scam! The Ryan Shed Plans product promises 12,000 different do it yourself shed building plans. Instead what you get is a whole bunch of disconnected sketches, drawings, And partial blueprints that he has photo copied from hundreds of unrelated sources. I personally have several years of carpentry, homebuilding, and woodworking experience So I assumed that even if these so-called “shed building plans” we’re light on specific details I’d still be able to use them. WRONG! You will find that 99% of the“Plans“ are completely useless for the purpose of building a backyard shed. After an hour of grinding through the files included in that on my download, I did happen upon a singly reasonably complete building plan for a modest shed which included detail dimensions, material list, and the sorts of things needed to actually build a shed. Doing a little more research, I later found where this particular we’ll Drawn to plan had been ripped off from another legitimate Shed building website. Shame on you RyanShedPlans for marketing such a terrible, useless product. Judging from your online sales pitch you are clearly a gifted marketer. If you spent as much time developing a database of legitimate, usable shed plans as you did putting together your totally fraudulent marketing material, you would have an incredible product worth much much more then you’re charging. But I guess you I already know that.
When people talk about the different types of shed available, what they should describe are the different types of roof available, since sheds only really differ by the type of roof they have. We provide shed plans for three types of roof: Gable, Lean-To and Hip. Gable, Lean-To and Hip roofs each have their pros and cons. Gable roofs are the most common since they are simple to build and offer plenty of space. Lean-To sheds are popular too for confined spaces. Hip roof sheds are the most complex to build, but they are arguably the most desirable too since they have a more uniform appearance. In terms of shed size, you should choose one that fills the space you have in your yard but you should also consider the overhang for the roof. A 16X24 shed is big enough for vehicle storage and to be used as a workshop, while a 12X16 shed is perfect for storing all your yard tools and mechanical equipment. Sheds smaller than this are fine for basic storage. Gable, Lean-To and Hip roofs each have their pros and cons. Gable roofs are the most common since they are simple to build and offer plenty of space. Lean-to sheds are popular too for confined spaces. Hip roof sheds are the most complex to build, but they are arguably the most desirable too since they have a more uniform appearance. In terms of shed size, you should choose one that fills the space you have in your yard but you should also consider the overhang for the roof. A 16X24 shed is big enough for vehicle storage and to be used as a workshop, while a 12X16 shed is perfect for storing all your yard tools and mechanical equipment. Sheds smaller than this are fine for basic storage. Gable, Lean-To and Hip roofs each have their pros and cons. Gable roofs are the most common since they are simple to build and offer plenty of space. Lean-To sheds are popular too for confined spaces. Hip roof sheds are the most complex to build, but they are arguably the most desirable too since they have a more uniform appearance. In terms of shed size, you should choose one that fills the space you have in your yard but you should also consider the overhang for the roof. A 16X24 shed is big enough for vehicle storage and to be used as a workshop, while a 12X16 shed is perfect for storing all your yard tools and mechanical equipment. Sheds smaller than this are fine for basic storage.

Build your own shed and you'll instantly have increased space for your tools, a place to work on DIY projects and a way to keep your garage free of clutter. There are many shed plans online that show you how to build your own shed from scratch using wood. It may be easier, however, to use a kit to create a resin, metal or plastic shed instead. A storage shed kit contains all the materials you need including trim. This Home Depot project uses the Keter Stronghold Resin Shed Kit to show you how to build a shed from a kit. We also offer a large variety of other types of shed designs to choose from. Like most, this DIY shed requires tools like a power drill and step ladder to put it together, but assembly instructions will vary by kit. Make sure to follow the manufacturer's instructions carefully.


One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.
Step 4 – Time to finally pour the concrete floor. This requires another trip to Home Depot. The kids are getting tired of this project and at this point, I don’t think they really care about how to build a shed, but would rather take a nap. Layla did kick butt at her morning JuJitsu tournament and won third place for her age group. If you are feeling tired like Layla and overwhelmed you can always get some help with you DIY shed project. Click here for assistance: HELP

My Shed Plans just might be every do-it-yourself junkie’s dream product. Ryan Henderson, the creator of My Shed Plans, has been building one-of-a-kind outdoor sheds for more than 20 years. If you believe his story, he has unselfishly decided to share his love of woodworking and carpentry through his guides which will enable the everyman who does not have handyman experience to build their very own outdoor shed. Can it be true?
Cut the sill piece and assemble the windows with pocket screws. Using a router with a 3/8-in. rabbet bit, rout a 3/8-in.-deep recess on the back of the window to receive the 1/4-in. Plexiglas acrylic sheet (Photo 14). Set the window frame, recessed side down, over a piece of acrylic sheet and trace the shape with a permanent marker. Cut the curve with a fine-tooth jigsaw blade and the straight sections with a fine-tooth blade in a table saw or circular saw.
The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.
When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.
I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.

Ø Large sheds — they are larger in size compared to the other type of sheds we have mentioned above. They have enough space that one can accommodate outdoor tools and still carry out activities. They can be used as offices. However, if used as an office, one will have to be careful while carrying out their activities to avoid substances that may hurt or prick them as they are moving around.


A saltbox shed is defined by its double sloping roof style. The front roof has a steep slope of 12/12, and the rear roof has a lower slope of 5/12. Most plans have options for the doors on either the front or side. Click on the images to view more details. The saltbox style evolved from the practice of extending the second floor roof line down to the first floor level to create additional covered living space. The design adds a south eastern flair to back yard shed designs.
Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
×