Structurally speaking, some sheds are actually miniature versions of houses or barns. The gambrel storage shed plans from mybackyardplans explain the basic steps of such a project. First, the foundation is built. Then the sidewalls are installed, after that comes the roof frame, the front wall and the door, then the back wall and roof decking, the trim and finally the shingles. At the very end, the shed is painted.

The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.

If your shed site slopes, pouring concrete is a bigger job because you have to build strong forms and pour extra concrete on the downhill side. A simpler method is to build your shed floor like a deck, with footings, posts and a wood frame covered by plywood. If you don’t like the opening under the shed, build a skirt to cover the space between the shed floor and the ground.

Shed are also great if you have a hobby. For example, if you’re passionate about pottery, gardening or even painting, you could use the garden shed as your private workspace. You can give it windows if you think you’ll need natural light inside. In fact, this can be an opportunity to upcycle some old windows and doors. Check out this project that we found on countryliving to see how this chic shed was built.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
When you use the information given in this program to build wooden sheds rather than focus on expensive materials, you will be able to save a huge amount of money. Everything in this program has been explained in an easy to understand method. When you purchase this program, it is important to find a reputed retailer. You need to find someone who sells only authentic products at reasonable prices.
My Shed Plans by Ryan Henderson is a comprehensive collection of over 12,000 easy to follow, step-by-step Shed and Woodworking Plans. Plus, you are getting an additional 400 Woodworking Plans. What I don’t like about My Shed Plans is I will never ever build a fraction of these Amazing Shed Plans. There is just too many Shed Plans for a weekend warrior like myself.

For those who don’t quite believe in My Shed Plans, they offer a 60 day trial. If within those 60 days, you feel like the product hasn’t lived up to its hype, you may return it and receive a full refund. A decent outdoor shed can be built in a week or two depending on your schedule, and the amount of time you have to build it. Therefore, 60 days is enough for you to test out the product and see what you come up with. If you have a shed worthy of showing off to your buddies, or gal pals, then keep it. If you have a heap of materials in a pile that resembles something Homer Simpson might have created, then return it. No big deal.

We found all the materials to build this shed at our local home center. Most of the construction is straightforward and requires only standard carpentry tools and a circular saw. For how to build the shed windows and door, you’ll also need a table saw, power miter saw and router. We used a Kreg pocket hole jig and pocket hole screws to assemble the door and windows. Another really great thing about small storage sheds such as this on, it don’t take as long to build! With a helper or two, you could have the platform and shell built in two or three days. Then expect to spend four or five more days completing the siding, trim, doors, windows and roofing.
When you nail on the siding, make sure it overhangs the framing on each side by 3-1/2 in. and that you’ve trimmed off the top corner to follow the slope of the angled top plate (Photo 2). Attach the siding with 2-in. galvanized or stainless steel ring-shank siding nails placed 8 in. apart along studs and 6 in. apart along the edges of the sheets. You’ll have to nail blocking between the studs to support the top edge of the siding and the Z-flashing.
The plans are pirated copies, some from "mycabinandsheds.com" as well as scanned 100 year old books . They are basic plans of very limited value. I clicked on a link from a "Kim Komando" email and saw the add for 12000 plans and I figured it was a trusted advertiser. Come to find out after contacting Komando that there are 3rd party advertisers she would take no credit for endorsing. I should have done more research before I paid for anything but after finding out it is a scam I called the 1-800-390-6035 click bank number and they gave me a refund with no arguing at all.
Ordering a prehung wood door like this from the lumberyard could cost as much as $1,000, but you can build one suitable for a shed at a fraction of the cost. We purchased clear pine at a home center and spent $120 for the boards. Photos 8 – 10 show how to build the door and mount it to a trim piece with hinges. The door consists of two layers of 3/4-in.-thick boards that overlap at the corners to add strength. Rip 1×6 boards to 4-1/2 in. on a table saw for the outside layer (Figure F).
When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.
If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.

DIY Shed Plans

×