The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.


They are the simplest and cheapest sheds one may find. They are easily assembled by regular people, they do not require initial construction knowledge. One may find the DIY kits and plans for these type of sheds. The most common type of sheds is plastic and wooden. They are mainly used to store garden tools, tractors and store items that are considered unsafe to be stored indoors such as gasoline and agricultural chemicals.

When you start to look at the plans, you realize some are absurdly out of date, or impossible to read because they are blurred - just like everyone else has reported on this site. What was even more appalling was it appeared most, if not all of what I had purchased, was easily available for free online. Some material looked as though it may have been pilfered - or "borrowed without permission or attribution from educational sites. And much of the "VIP-Premium" content was past its copyright - which is great if you want a children's woodworking book from the 1800's for historical purposes, which I'm sure is a fascinating read, but all that was ultimately meaningless since the sum total of what I downloaded offered nothing of any immediate benefit toward building a shed from a quality, step-by-step plan, with 3-D renderings, Material lists, and best practices, etc to help you build quickly, efficiently, and have something you can use and be proud of. I think the only proprietary plans must the the freebie they give away to entice you to pony up.
Sheds have become multipurpose, must-have buildings that are competing with pergolas and gazebos as your next backyard project. Pictures on social media only grab people's desires more. Before going any further, do your research. Figure out what you need it for and why, and whether you will build the shed yourself, or hire a pro. Check with your local planning department to comply with codes and guidelines. Determine if the shed will mirror the architectural features of your home--always a good idea. Assess your budget, materials needed, and the time it will take to complete the project.

One look at everything you receive with this program and there’s no way you’ll ever opt to pay someone tons of money to do the exact steps that you have right in front of you. Ryan’s Shed Plans is the smart, affordable and easy way to build whatever it is that you want in your backyard. Whether it’s a rustic yard shed, a cottage shed, a garden shed, a gambrel barn or something else, you finally have all the (actual) steps needed to easily build it on your own. The program comes with way more than just a couple of project plans. Instead, it provides with you 12,000 different shed plans to choose from. So, if you want a shed with glass walls or a shed that’s perched on a porch, there’s a plan for it.
Because the shed is designed to abut to another structure, the foundation need only be pressure-treated skids, the roof pitched in only one direction to shed water, and the back wall sheathed with 1/2-inch CDX plywood, which withstands indirect exposure to moisture. See Anatomy of an Outdoor Shed or Playhouse for more about typical shed construction.
Can you believe that building this cedar shed costs less than $300?! Yes, you read that right – a retail price for something similar can be around $1600, so this is one heck of a good deal. Not only is it incredibly good looking and budget friendly, it’s big enough to store all your outdoor items yet it won’t get in your way thanks to the compact design.
· Wood sheds — these types of sheds are made of wood. They are the most common type of shed compared to metal and plastics. They are the most conducive as they can be used as children playhouses, outdoor office and still storage of garden tools. They are also easy to modify and renovate as increasing their size. They are preferred to other types as they blend well with the environment and give the environment a good natural look. However, they must be maintained regularly from insects as termites which feed on wood.
Very nice project. Seems to be well built. When I built mine we went with a full basement and made it tall enough for a 4 ft. attic as well. We maximized our footprint in storage capacity. Electricity in the shed was also a must with its own breaker panel. We needed the space because I even have stuff to fix stuff and there is no such thing as a bad piece of junk.

Each truss is made up of two 2 x 4 rafters and one 2 x 4 ceiling joist. The three boards are joined together with 1/2-in. plywood gussets. To speed up the assembly process, build all the trusses on the shed floor before erecting the walls. Start by cutting all the rafters to length with a 40° angle at one end of each. Cut 2 x 4s to 10 ft. long for the bottom chords of the trusses. Also, cut all of the plywood gussets.
Before you start building your shed, there are a few things you might want to clear out first. For instance, does your town require you to obtain a building permit? Where do you want to build the shed? Is building a shed allowed on your property? Listing down the equipment, furniture, fixtures and goods to be stored in the shed, as this will determine what type of shed you need. What should be the size of the shed? There are practically lots of areas that you need work on before starting with the building phase. The following breakdown will help you get through this phase:
I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!
This garden shed is the tiniest, but that’s the beauty of it – it’s exactly the right size to store your gardening tools. As there are more details (all in order to give you more storaging options), it might take a little longer to build this shed than the others, also the makers of the plan have said it cost around $400 to build this, but the shed is definitely one of a kind and worth the efforts.

A saltbox shed is defined by its double sloping roof style. The front roof has a steep slope of 12/12, and the rear roof has a lower slope of 5/12. Most plans have options for the doors on either the front or side. Click on the images to view more details. The saltbox style evolved from the practice of extending the second floor roof line down to the first floor level to create additional covered living space. The design adds a south eastern flair to back yard shed designs.


Normally we try to help our customers as much as possible, especially if it is a matter of helping to figure out where certain material goes on the building. Keep in mind, you are responsible for correctly constructing the shed if you purchase a kit, but we can offer direction. (Prior construction experience is recommended.) If there is any uncertainty about whether or not you will be able to assemble the storage shed, consider one of our build-on-site options and we will send a team to assemble the building for you.
I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!
The variety of different shed designs is huge so no wonder you might be feeling stuck with finding the best shed plans – especially if you’d like to find shed plans free and available for instant download. Well, don’t worry any longer since we’ve compiled together the absolute best small shed plans and garden shed plans. These premium-quality free plans are all you need for building the perfect shed for your home!
When you nail on the siding, make sure it overhangs the framing on each side by 3-1/2 in. and that you’ve trimmed off the top corner to follow the slope of the angled top plate (Photo 2). Attach the siding with 2-in. galvanized or stainless steel ring-shank siding nails placed 8 in. apart along studs and 6 in. apart along the edges of the sheets. You’ll have to nail blocking between the studs to support the top edge of the siding and the Z-flashing.
We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
Apart from being a space to keep your garden equipment and tools safe and dry under the roof, there are numbers of other possibilities how to use our timber structures and DIY shed plans. You can create a kids play area, a detached study, an additional storage space, tiny studio or a little secret relaxing spot. No matter what purpose our shed plans for sale will have in your life, they will always be a lovely addition to your home. Also the shed plans prices are very friendly.
The best spot for a shed is level, well-drained ground close to where you work in your garden or yard. The location doesn’t need to be perfectly flat; the foundation design shown in the plans allows for adjustments to make the floor level. Small sheds require only a top-of-soil foundation, even in locations with freezing winter temperatures. Precast concrete deck blocks work perfectly for this.
×