Ryan Henderson is a master woodworker with over 30 years experience and has developed Ryan’s Shed Plans.  This is a detailed digital book with 12,000 shed plans available for instant download with many different bonus offers.  The plans are detailed because they are written by a master woodworker.  He has taught many newbie woodworkers over the past 30 years how to build sheds and other woodworking projects.  He is skilled in the art of woodworking and put together a nice, large set of plans.  The plans are easy to read with step-by-step instructions.
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.

Apparently, most guides provide you with the same old information that doesn’t offer any benefits to a gardening or DIY enthusiast. Fortunately, you can benefit from programs like My Shed Plans. This exceptional program is easily available on the internet at an affordable price, and helps you learn everything about building a shed in your garden or backyard.
Figure G shows details for the marking jig. Photo 12 shows how to use this setup to draw the curves for the window pieces. Next cut the side pieces (Figure F). Set the side pieces in place over the top of the header and mark the angled cuts (Photo 13). Finish the curved trim piece by first cutting the angles on each end, and then sawing the curves with a jigsaw and sanding them smooth. Use the marking jig to lay out the curved brace, too (Figure G).
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
This shed, one of our most popular outdoor storage sheds ever, features some unique details that make it look more expensive than it really was to build. Arch-top windows and a custom door give this shed a high-quality look that belies its low cost and simple construction. The panelized construction technique means you could build the parts in your garage on a rainy weekend and then haul them to the site for assembly. Modest finishes like OSB siding and composite trim and fiberglass shingles help keep the materials cost low. And you’ll save hundreds of dollars by providing your own labor to build the door and windows for some cheap outdoor storage. The modular construction and wood platform foundation mean you can construct this shed almost anywhere, even on remote or sloping sites. In this article, we’ll show you the basics of how to build the shed and install the windows and doors.
The plans are pirated copies, some from "mycabinandsheds.com" as well as scanned 100 year old books . They are basic plans of very limited value. I clicked on a link from a "Kim Komando" email and saw the add for 12000 plans and I figured it was a trusted advertiser. Come to find out after contacting Komando that there are 3rd party advertisers she would take no credit for endorsing. I should have done more research before I paid for anything but after finding out it is a scam I called the 1-800-390-6035 click bank number and they gave me a refund with no arguing at all.
5 Popular and Best Paving Materials for Your Driveway Based on your goals and needs, you can take your pick from some of the commonly used driveway landscaping materials listed here: Asphalt Concrete Gravel Pavers Shell A driveway can be a really attractive feature of your home that people encounter first, so be wise to opt for the best paving material for your driveway!
Figure A (above) and Figure E show how to build a shed and the exterior trim details. Start by mounting the brackets. Line up the outside edges of the lower brackets with the face of the siding, push them tight to the soffit and screw them to the wall. Center the top bracket on the peak and push it tight to the soffit. Starting with the pieces that go under the brackets, wrap the corners with the corner board. Overlap the front corner board onto the side corner board (Figure E).
Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.[5]

You will find that the shed blueprints are mostly just that. These are not step-by-step instructional material like you might think. Instead, they are merely design drawings. They include a variety of views, (plan, elevation, perspective), and a description. Sometimes you’ll get a materials list. And while there are admittedly a few that give full instructions, most of them are just shed designs and plans. But because they’re from different sources, some of them are the wrong way round.
Our Free shed plans are aimed more at giving you an idea of what to expect with from the premium plan. For the advanced DIYer, the basic free plans may even be enough to build the full shed. But if you’re a beginner the basic free plan will only act as a guide. In order to get the full step-by-step instructions you would need to invest in one of our premium plans.
Our backyard storage shed plans are defined by their cost effective quality construction and simple to build designs. Their construction includes 2x4 framed walls, T1-11 grooved plywood siding, asphalt roofing and a strong sandwich construction door. You can buy shed plans with different pitches of roof slopes The lower pitched roof and simple trim make them easy and inexpensive to build. If you are looking for storage shed plans that are designed to be easy to build from and as cost effective as possible, the backyard shed plan line is your best choice.
The roof panels are heavy and a bit awkward, so round up three strong helpers for this part of the job. Move the panels into position and lean them against the front and back walls. Then set up ladders inside the building for two helpers and push one of the panels up to them. Slide the panel up the roof until the bird’s-mouths drop over the top plate of the wall.
Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.
Ø Large sheds — they are larger in size compared to the other type of sheds we have mentioned above. They have enough space that one can accommodate outdoor tools and still carry out activities. They can be used as offices. However, if used as an office, one will have to be careful while carrying out their activities to avoid substances that may hurt or prick them as they are moving around.
Don Vandervort has developed his expertise for more than 30 years, as Building Editor for Sunset Books, Senior Editor at Home Magazine, author of more than 30 home improvement books, and writer of countless magazine articles. He appeared for 3 seasons on HGTV’s “The Fix,” and served as MSN’s home expert for several years. Don founded HomeTips in 1996. 

Most of the Amish Built Sheds Unlimited storage sheds can be custom ordered as a DIY STORAGE SHED KIT PACKAGE for assembly on-site. If for any reason installing a completed storage building into the backyard is not an option or if you are simply a handyman at heart and would like to try your own skills, then a Economy Shed Kit, Vinyl Sided Storage Shed Kit, Classic Amish Sheds Kit or a Premier Garden Storage Shed Kit might work perfectly for you.
When elaborating the shed plans, take into consideration the purpose that the shed will serve. This will help you determine the suitable dimensions as well as the structure of the interior. Keep in mind that you’ll most likely want to have some shelves and a table inside the shed so you need to add these to the list of materials. You also need to take into account the tools you’ll need for the project so you can plan accordingly. You’ll probably need a saw, a drill, a shovel and a few other basic things. As far as the materials go, it all depends on the type of shed you want to build. On instructables you can find detailed instructions and lists which teach you how to built a cute shed just like this one.
I tell most of my subscribers to use his program as a resource just like you would a book.   His plans are not all you would ever need in regards to shed plans, but it is a nice start.   For the cost of the program, it is on par with any book you would buy at the store to find shed ideas or plans.  However, you get thousands of plans and 4 bonus offers instead of a few good plans.
Because most DIY manuals and plans are written by ghostwriters who don’t know anything about carpentry, it is common to find incomplete guides. This package is different. Ryan has spent time and effort ensuring that his expertise is laid out in a way that anyone can follow. After all, he is an educator. You also save because the plans make sure you don’t waste material.
Now, if the only need for the present is a shed that’s large, consider purchasing garden shed plans blueprints for small sheds at the same time. You might need small storage spaces in the future or there are items that need to be stored separately. For example, for storing dangerous things like pesticides, gasoline and herbicides, the most appropriate sheds are small plastic sheds.
@diy-plan: Thank-You for your best wishes on the Isacc, believe we always lose sleep when one is on the way. Your advice on not buying factory kit sheds I am 100% in agreement with, they are poor quality lumber, never pressured treated, steldom last more than ten years, here they are lucky to make it six years. I was asked to put one together by a friend after her son bought it for her as a gift, I almost had to rebuild it and when I was finished I thought what an ugly building. Five years later it had termites. When a shed is built on a wood base the base must be anchered into the earth, I have seen sheds flipped upside down after a storm when they are not anchored. I built a shed for a workshop a few years ago to build custom canoes in it, to make it storm ready I used OSB under the siding, then cross braced the studs, insulated it, then covered the studs on the inside with 5/8 inch plywood. The windows have storm shutters that I built for them, if this building fails in a storm I hope I am near the Canadian border.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
Build the framework for the back wall. Make the top and bottom beams (a.k.a. the plates) the same length as the length of the floor which they sit. To keep your measurements simple, make the spacing between the vertical studs identical to the spacing between your floor joists. Note that the back wall should be lower than the front wall so that the roof slopes and directs rain away from the door.[6]

There are a lot of plans and designs to choose from when building the shed, so make sure you take a look over several alternatives before starting the actual construction. Invest in weather-resistant lumber (pressure-treated lumber), making sure all the components are in a good condition and perfectly straight. Drill pilot holes before inserting the screws, to prevent the wood from splitting.


If you plan to paint your shed, natural wood siding isn’t necessary. You can buy sheets of OSB (oriented strand board) siding at a fraction of the cost of real plywood, and it’ll probably last longer too. LP SmartSide panel is one brand. You can buy plain, grooved or stucco-like panels in several thicknesses and sizes. Ask at your local lumberyard to see what’s available.
They are the simplest and cheapest sheds one may find. They are easily assembled by regular people, they do not require initial construction knowledge. One may find the DIY kits and plans for these type of sheds. The most common type of sheds is plastic and wooden. They are mainly used to store garden tools, tractors and store items that are considered unsafe to be stored indoors such as gasoline and agricultural chemicals.
For $37, I’d say that My Shed Plans is worth giving a try. There’s nothing more rewarding than having the freedom to pick your own shed design and building it with your own two hands. Taking a different route to building a shed will probably yield less than desirable results, and where would you even start? You could easily rack up $37 in mistakes and wasted time and effort just trying to freestyle it.

I have recently purchased a house with an older roof that needs to be restored soon. So, I am trying to decide on I should go with a metal roof other than shingles. If I install metal roofing over solid decking such as OSB or plywood, integrate with a properly insulated garret, there is very little noise difference compared to standard asphalt shingles. I have briefly read benefits and drawbacks of Metal roofing but as I listed before I should go to metal roofing and hiring a roofing contractor no matter its expensive or noisy anyhow, Your article has cleared a lot of misinterpretation I’ve had before.


Once redirected to the webpage, I found a bewildering list of links, and downloads. Some were redundant, some didn't work. And I kept trying to figure out where the 12k plans were. I thought for what I paid I should be able to plug in my parameters into a query and get something that remotely looked like an organized list of plans that matched my query. But nada. Nothing. Zilch. Just piles of pdf's tucked seemingly haphazardly into folders here and there, listed in not too logical order in links on a webpage.
It is worth mentioning that the files in this program can be easily downloaded into PDF format. This provides you with each access at your construction site. The best part is that you can easily browse through different shed plans on your server, and pick the ones that meet your specific project needs and requirements. You can even download everything on your server. The process is very easy to access and understand.
If you decide that you don’t want the second package after purchasing the first package, you will be offered a third package which is even more explicit that contains tonnes and tonnes of woodworking plans that are laid over thousands of pages. All these eBooks are neatly organized, very much real and indeed the amount of plans that they contain might even come out as nauseating, if you’re someone who doesn’t have so much of patience to go through all of them.
You can even go online and look up prices!  For example, if you visit lowes.com, they have a search box where you can enter in the item and find out each price!  This will save you some time.  The only drawback I see to this is that I find it really beneficial to go to these big box lumber stores and see exactly what I want.  For example, the LP Smartside siding panels I recommend to use:  some stores carry a cheap variation of these that have a brown color to them on the inside of the panel, and this is not what you want!  The have the consistency of a 'fibre' panel that will crack easy.  The true LP siding panels are pre-primed on the outside surface and have a natural osb color on the inside surface.
I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!

Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.
Once you’ve received the package and all it entails, you can begin creating your own outdoor shed whenever you feel ready. The only time you need to exert the effort is when you’ve begun construction. When you do decide to start, make sure that you have a decent amount of time as well as motivation to carry through the whole project. You don’t want to be left with an unfinished shed out in the yard, a constant reminder that you tried and failed.
Interesting lens. When I was growing up on a farm, I had to help when my father built a double-car garage, pighouse, machine shed, doubled the size of the barn etc. They all required foundations and he had us kids place rocks between the shovesl of concrete to save on the cost of cement. Please check out my "Flower Power" lens 'cause I need more Squid likes.

Can I tell you a secret? I don’t think I would ever do this again because I have another secret. Shhh, don’t tell, but DIY projects that are a joint effort between my hubby and myself really aren’t fun. They are stressful, and hard and take a toll on us. Which may seem strange in a way because we are both handy and we both enjoy these type of projects and we even have a pretty good idea as to what we are doing. Actually, I think we really have it together – separately! Once you throw the two of us together is gets a little intense. Enough about that, let’s get on to the project.


I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).
A shed isn’t something you see people build…at least not very often. It’s rather the type of structure you discover in the backyard when you purchase an old house. So how do these things appear? They’re obviously built so let’s see what it takes so put a shed together. We looked around and we found a bunch of shed plans that we’d like to share with you. They’re pretty simple and you don’t need much experience with this sort of projects to be able to pull it off. They’re all customizable so you can enjoy them whether you want a pretty she shed or a manly workshop.
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.

I got suckered into the 12k shed plans, only to find myself falling for one of the oldest scammer sales pitches in the book by being up-sold into the add-ons. Before I clicked I did a quick review and the first few sites that popped up had said that it was worth the money to buy the add-on because that is where the real value was (perhaps a review page planted by the good folks of MyShedPlans).

The last project we want to share with you today is a greenhouse/ garden shed which we found on lizmarieblog. It’s really cute and inside you can find shelves, storage compartments and a bunch of other practical things. In addition to all that, this lovely shed even has a chandelier. It’s a decorative element and it really elevates the decor to a whole new level.

Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
The plans are pirated copies, some from "mycabinandsheds.com" as well as scanned 100 year old books . They are basic plans of very limited value. I clicked on a link from a "Kim Komando" email and saw the add for 12000 plans and I figured it was a trusted advertiser. Come to find out after contacting Komando that there are 3rd party advertisers she would take no credit for endorsing. I should have done more research before I paid for anything but after finding out it is a scam I called the 1-800-390-6035 click bank number and they gave me a refund with no arguing at all.
This is nothing but a pyramid scheme in disguise. Don't spend the first $37.00, they lead you to believe that you are getting discs and actual plans until you pay $37.00, then they tell you that you have to download everything but at an additional price. I'm calling the Fraud Department at the Texas State Attorney Generals office and reporting them.
Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.
Run! Do not walk away from this product! Total scam! The Ryan Shed Plans product promises 12,000 different do it yourself shed building plans. Instead what you get is a whole bunch of disconnected sketches, drawings, And partial blueprints that he has photo copied from hundreds of unrelated sources. I personally have several years of carpentry, homebuilding, and woodworking experience So I assumed that even if these so-called “shed building plans” we’re light on specific details I’d still be able to use them. WRONG! You will find that 99% of the“Plans“ are completely useless for the purpose of building a backyard shed. After an hour of grinding through the files included in that on my download, I did happen upon a singly reasonably complete building plan for a modest shed which included detail dimensions, material list, and the sorts of things needed to actually build a shed. Doing a little more research, I later found where this particular we’ll Drawn to plan had been ripped off from another legitimate Shed building website. Shame on you RyanShedPlans for marketing such a terrible, useless product. Judging from your online sales pitch you are clearly a gifted marketer. If you spent as much time developing a database of legitimate, usable shed plans as you did putting together your totally fraudulent marketing material, you would have an incredible product worth much much more then you’re charging. But I guess you I already know that.
• Improper geographical placement — this is one of the huge mistakes one may make while shed building. It may be too close to your house hence obstructing your beautiful view from your living room or your kitchen as you are cooking. The last thing one would want is not like your house because of a simple thing as a view, so be careful with where you place your shed. One may also build the shed too far away from their house which again is an inconvenience. Who would want to walk from your house to your shed to get some tool you need and you have to trek some long distance? You may also need your shed someplace you can see due to the security reasons. You would want some stupid thief taking your stuff without you see them, would you? Or walking down a snowy lane during a chilly night just so you could get something from your shed. Before building your shed consider all the factors whether positive or negative and then come up with the place in your compound with the most advantages compared to disadvantages.

When you’ve decided on a shed location, dig two trenches 16 in. wide, 12 in. deep and 13 ft. long. Center the trenches 66 in. apart. Fill the trenches with a 3-in. layer of gravel and compact it with a hand tamper. Repeat this process until the trench is full. Use a level and long board to level the top layer of gravel. If the ground is flat, also make sure the gravel beds in the two trenches are level with each other.


I don't waste my time on free plans, store-bought sheds, or ready-made, mail order kit solutions... been there, done that. Free means lack of user feedback and you get absolutely no customer support. With store-bought and ready-made mail order sheds: they're flimsy, profit-driven solutions that I've always had to tear apart and modify too much to get the storage space to work or to match the character and style of the home.
×