I have spent a truckload of time on the same for five years by purchasing and reading Woodworking books, going through woodworking plan blueprints and understanding woodworking designs. While some of them are very detailed most of them left with questions more than answers because of the incompetency and inadequacy in the design details. I haven’t come across a single plan that had everything I needed, forget the step by step instructions.
Remember that anything you build will either add or detract from your property's appearance and may impact your property value. Metal and vinyl materials may be easier to maintain, but are the least expensive options and tend to look cheap. Natural wood and prefinished wood products will add character and value, but are typically more expensive to buy and maintain.
The design of the shed you choose will depend on what you will be using it for and were it will be located. If you just need a small shed to place garden equipment, a lean to shed can be ideal. This design of shed will not take much room and it can be placed next to a fence or wall. The lean to shed has a single sloped roof design. It is one of the most common for garden tools as well as pool equipment and chemicals.
Galvanized steel stanchions, stainless steel wire, and a hardwood cap were used for the railing of this modern shed built by J. C. Stoneman Construction. Located in Port Townsend, Washington, the modern shed features a sliding glass door, clerestory windows, and a pitched roof that overhangs the porch and provides shade. The siding is made of Western red cedar.
· Wood sheds — these types of sheds are made of wood. They are the most common type of shed compared to metal and plastics. They are the most conducive as they can be used as children playhouses, outdoor office and still storage of garden tools. They are also easy to modify and renovate as increasing their size. They are preferred to other types as they blend well with the environment and give the environment a good natural look. However, they must be maintained regularly from insects as termites which feed on wood.
Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.