Hello Instructables!  This is my entry into the Shopbot Contest.  This Instructable will show you the steps to building your own shed.   We decided that our shed would be for storage because we wanted to get some stuff out of the garage so we can use it as a shop.  One of the challenges of building a shed in our backyard was that the ground was sloped in the area that we wanted to put it, so we had to find a way to get around that.  Another was that we are building beside some well established trees, and we didn't want to harm their root structure.  This is why we went with cinderblock and mortar rather than poured concrete.
I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!
I don't waste my time on free plans, store-bought sheds, or ready-made, mail order kit solutions... been there, done that. Free means lack of user feedback and you get absolutely no customer support. With store-bought and ready-made mail order sheds: they're flimsy, profit-driven solutions that I've always had to tear apart and modify too much to get the storage space to work or to match the character and style of the home.

I tell most of my subscribers to use his program as a resource just like you would a book.   His plans are not all you would ever need in regards to shed plans, but it is a nice start.   For the cost of the program, it is on par with any book you would buy at the store to find shed ideas or plans.  However, you get thousands of plans and 4 bonus offers instead of a few good plans.


In a perfect world, all of the studs would be straight, but since they aren’t, make sure to pick the best ones to use at corners and at door and window openings. Sight down the length of the studs and set aside the ones that are perfectly straight. While you’re at it, also set aside studs that are really crooked. You can cut these up to use as cripples or blocking. You may find other uses for short pieces later on.
There are plenty of jobs to do out in the yard, and most of these tasks require tools and machines like weedwhackers, lawn mowers, edgers, and everything else. The garage can only hold so much, because it’s meant to store your car or cars. Heaven knows you aren’t going to be storing that equipment inside the house once you’re through with it, so an outdoor shed is necessary in every home’s backyard. It can cost a fortune to hire a woodworker or carpenter to customize an outdoor storage space for you. And if you take it upon yourself to build a shed, you’ll probably be left with nothing but frustration and problems.
· Wood sheds — these types of sheds are made of wood. They are the most common type of shed compared to metal and plastics. They are the most conducive as they can be used as children playhouses, outdoor office and still storage of garden tools. They are also easy to modify and renovate as increasing their size. They are preferred to other types as they blend well with the environment and give the environment a good natural look. However, they must be maintained regularly from insects as termites which feed on wood.
I have recently purchased a house with an older roof that needs to be restored soon. So, I am trying to decide on I should go with a metal roof other than shingles. If I install metal roofing over solid decking such as OSB or plywood, integrate with a properly insulated garret, there is very little noise difference compared to standard asphalt shingles. I have briefly read benefits and drawbacks of Metal roofing but as I listed before I should go to metal roofing and hiring a roofing contractor no matter its expensive or noisy anyhow, Your article has cleared a lot of misinterpretation I’ve had before.
Often referred to as the ebook expert, Bob Burnham's reviews are easily reachable everywhere – blogs, online publications and magazines. He was featured in prestigious publications and he even gained a few rewards for his own ebooks. While constantly releasing new work, his main focus is on unbiased reviews of modern ebooks while pursuing his career as a literature professor. Over the past years, his name was linked with a plethora of bestsellers that were successfully reviewed over the Internet. more
Proceeding with your shed requires smart planning. For starters, you may need a permit from your local zoning authority and/or homeowners’ association to build a new structure on your property; check with the proper authorities before you even invest in the materials. Plus, there may be rules that dictate how you may use your shed, or whether you’re allowed to wire it for electricity. Once you get the go-ahead to build, you’ll want reliable guidelines. For anyone inclined to DIY rather than buy a prebuilt shed, look over a selection of free LP Outdoor Building Solutions plans based on your choice of size and roof style. Each set of plans comes with extensive material and hardware lists, detailed construction information, and tried-and-true building tips.
The men showed up early Tuesday and went right to work.They were polite, friendly and answered any questions I asked. Although my building was on the larger side, 28' by 44' ft. they worked well together and finished in two days! Myself and two contractor friends inspected the building and were all quite pleased with the quality of the building. The men cleaned up the perimeter before leaving and other than a new building you would never know they were there. I am very pleased and would definatly recommend Sheds Unlimited.. 
Build the framework for all four walls. To account for the fact that the front and back walls are different from each other (due to the doorframe in the front) and the side walls must both be sloped (to prevent rain from collecting on the roof), each of these will have to be tackled somewhat differently. It’s easiest to construct the back first, the front second, and the two sides last, as shown in the numbered image below. See How to Frame a Wall for more information before you read the instructions below.[5]

how to build a shed

×