I just want to let you know that your Driver was a pleasure to deal with. He placed the shed perfectly into a tight spot and then took the time to make sure it was level and sitting properly. I feel any other company would of placed it as close as possible to where i wanted it and would of been on their way. He also noticed (I would of never noticed) that the door didn't line up perfectly when closed and made some adjustments.

Because the shed is designed to abut to another structure, the foundation need only be pressure-treated skids, the roof pitched in only one direction to shed water, and the back wall sheathed with 1/2-inch CDX plywood, which withstands indirect exposure to moisture. See Anatomy of an Outdoor Shed or Playhouse for more about typical shed construction.


From start to finish, it may seem a little intimidating, but just take it one step at a time. The nice thing about building a shed is that it starts off easy (layout the foundation, building the floor, etc.), and by the time you get to some of the more daunting tasks (like the roof), you would have gained a lot of confidence/experience working your way to that point.
We provide outdoor shed plans that are affordable and easy to build from. Our storage shed plans are organized so that you can buy shed plans and build your own shed no matter what your skill level. There are helpful how to build instructions and tips that go along with each stage of the storage building process from the foundation, floor, walls to the roof. Building your own shed saves you money and is a very rewarding experience that adds value to your property. Click the shed images above to view our library of over 200 storage shed plans.
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.

• Spending too much money on unnecessarily expensive sheds — sheds the main purpose is to house outdoor and garden tools that cannot be stored in the house. Some people spend a lot of their money on large and stylish sheds which to my opinion in unnecessary. Spend your money wisely. You can save a lot of money on shed building by avoiding to hiring a huge manpower in the construction. You may even save some of your money by enquiring price rates of the items you need at various lumberyards, you will be able to know who have the best quality products at affordable prices.


We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
Figure A (above) and Figure E show how to build a shed and the exterior trim details. Start by mounting the brackets. Line up the outside edges of the lower brackets with the face of the siding, push them tight to the soffit and screw them to the wall. Center the top bracket on the peak and push it tight to the soffit. Starting with the pieces that go under the brackets, wrap the corners with the corner board. Overlap the front corner board onto the side corner board (Figure E).
We’ve simplified the door-hanging process by mounting the door to a 1-1/2-in.-thick trim piece and then screwing the trim to the wall. An easy way to mark and cut matching hinge recesses in both the door and the trim is to clamp the trim alongside the door, making sure it extends 1/8 in. beyond the top of the door. Then mark the hinge cutout on both the door and the trim at the same time.
Copyright © 2019 HubPages Inc. and respective owners. Other product and company names shown may be trademarks of their respective owners. HubPages® is a registered Service Mark of HubPages, Inc. HubPages and Hubbers (authors) may earn revenue on this page based on affiliate relationships and advertisements with partners including Amazon, Google, and others.

Working from ladders is more dangerous than working from scaffolding. Plus, having to constantly move ladders around is time consuming. When you get to the roof construction, consider renting a set of scaffolding with wheels. You’ll be amazed at how much easier it is to have a stable platform to work from and to set your tools and materials on. You can rent a 5-ft.-tall section of scaffold with three planks and wheels for about $110 per week.

DIY Shed Plans

×