If you have the do-it-yourself skills and an open timeframe, check out the various plans available online or for purchase. Make sure you thoroughly understand the instructions and actually have the ability and tools to do the job. Other sources for sheds include prefabricated buildings that you would order from a reputable company and kits. Some include pre-cut lumber that is shipped to your house. Before ordering, find out if additional milling, drilling, or cutting will be needed, along with necessary tools.
I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.
I'm always surprised at how little forethought most backyard builders give to the shed's doors. After all, there's no sense in building a shed to store a particular item, such as a lawn tractor or wheelbarrow, if you can't fit it through the door. I saw a shed recently that had its doors removed. When I asked why, the homeowner explained that he framed the doorway wide enough for his riding lawnmower, but didn't take into account the amount of space taken up by the hinged inset doors. So, he had to remove the doors to fit the mower inside. (He's in the market for a skinnier mower.)
Now that the floor is completed you can assemble the wall frame on the leveled floor. You can build the wall frames using 2x4 lumbers. The top and bottom 2x4’s are called plates. Place the 2x4 wall studs 16-24 inches apart and nail through the plates and into the wall studs. While the wall frame is still on the ground you can install the siding to make it easier. When the wall is completed rise up and nail it into the floor.
Any person interested in the field of woodworking will tell you how much time and effort it goes into building a wood project. And even after putting in so much effort, the chances of mistakes and failures are pretty high. So much so, that after a time you will feel like giving up altogether. Most people spend a lot of time and money on their first shed project and often end up frustrated because what they finally create is nothing like they wanted to. Why? The measurements were all screwed up! If that sounds like your story, it is finally going to change.  With Ryan’s collection of shed plans in your arsenal, you will never ever have to look for shed plans anywhere else.
· Gambrel styled shed — it is a very common type of shed. Its roof is highly steep and is four sided. This type of shed at some point resembles a hexagon. This type of shed is preferred as the shape of its roof makes the interior of the shed to be spacious hence creating more space where a lot of garden and outdoor tools can be stored. In this type of shed, one may have a workshop in the shed. They can even accommodate a car due to their large spaces.
Don’t assume that you’re missing something if you have a question that cannot be answered within the guidelines of the shed plans. Builders at all levels will always have questions and it is better to ask the question than miss something important in the process. Go online and find a forum or a video if you have a question. Better yet, read all the little print that you skipped over in your shed plan and see if the answer is there, it might be.
The last thing you want is to build a shed only to discover that it’s too small to hold your stuff, handle your hobby, or otherwise meet your needs. By the same token, you don’t want a shed that’s so large it overwhelms your property and looks ungainly behind your house. Choosing the wrong size shed is a common homeowner error, but LP Outdoor Building Solutions’ handy tool helps you get it just right. Check it out, and you’ll see that size does matter!
We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
The female version of man caves is she sheds: havens to escape that can be designed and decorated in whatever style the owner desires. Inspired by a tiny hummingbird viewed nearby, this shed is aptly named Hummingbird Cottage. Lovely photos on Instagram reveal that the shed is used for art projects, as a retreat, displaying vintage pottery, and for entertaining friends. Extras like a hanging faux-crystal chandelier, potted flowering plants, wreaths, and stained glass give it a personal touch.
You will, however, need to follow the approved plans and details without making changes. Also, a basic site plan that shows the outline of your property, house, and proposed shed location will need to be submitted, along with the plans. Be sure to indicate all existing structures (pool, fences, retaining walls, etc.) on the site plan. Forms are usually available for completing the site plans. Two sets of plans are typically required, for the approval process.

I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.


Because most DIY manuals and plans are written by ghostwriters who don’t know anything about carpentry, it is common to find incomplete guides. This package is different. Ryan has spent time and effort ensuring that his expertise is laid out in a way that anyone can follow. After all, he is an educator. You also save because the plans make sure you don’t waste material.
Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.
There are many types of roof design that you can use to add to your shed. But since you are a beginner, I would advise you to build a simple roof structure so as to avoid the frustrations that can come with building complex roof structures. Complex roof structures also require additional tools and greats skills hence, it is time consuming and a bit expensive compared to the simple roof structure.
My Shed Plans by Ryan Henderson is not just your run-of-the-mill collection of a few hundred shed plans, but it is a collection of whopping 12,000 shed plans. Yes! You heard it right. And each one of them is accompanied with detailed, step by step instructions and diagrams, tool and material list ensuring that nothing goes wrong when you start with one.
I would advise you to aim for the type of wood that is resistant to deforming, fading, pets and dampness. Once at a local lumberyard, request for the heartwood, which is the innermost part of the wood in a tree. Unlike sapwood which is the outer most wood found in a tree, it is resistant to harsh conditions. The following species of wood are suitable for shed building: Cedar, Cyprus, and Redwood. Before buying the wood, check thoroughly that it has been well processed. Be cautious of wet wood to avoid shrinkage after you have already bought it and also Greenwood which may cause you inconveniences. The most common type of outdoor wood is pressure treated and consists of pine and fir.
Step 5 – We bought the shed plans online for a mere $14.99. You can find the plans to build a shed yourself online HERE.  and due to the fact that the back wall of the shed will be up against the fence, we decided to build that first. Of course, we took another trip, yep, you guessed it. Layla was quite excited to get the wood because she has convinced herself that this is a playhouse for herself and her dolls. She expects it to be fully equipped with bunk beds and a place for her dresses. She also doesn’t want daddy to put his dirty tools in her playhouse. I think she and Brian need to work that out amongst themselves. 
Woodworking is an art, and like most art forms, it only require dedication, skill and time. Good thing you have our shed plans. You wouldn’t be spending months figuring out how to cut wood pieces, etc. You will get enough guidance to start right away and build a gorgeous shed for your garden. The benefit? You would learn how to build sheds within days. No experiments and no wasting time!
Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
Ditto. It's a scam because, like many other Internet scams of this nature, they have used bogus "review" sites they created themselves (I checked with ICANN) to falsely pump up their value. They charge your credit card immediately, without allowing you to review your purchase, and most importantly, they have ripped off a lot of the "product" from either free sites, such as universities, or even commercial sites that surely don't realize that their product is being used this way. They also have false promises, such as that all the plans will have instructions,etc. Not so, It's just a crazy compliation of junk they scoured off the Internet, repackaged in what seems like about a half hour. Totally bogus.
You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly. 

Please Note: Prices, promotions, styles and availability may vary by store and online. Inventory is sold and received continuously throughout the day; therefore, the quantity shown may not be available when you get to the store. This inventory may include a store display unit. Online orders and products purchased in-store qualify for rebate redemption. Mail-in Rebate is in the form of merchandise credit check, valid in-store only. Merchandise credit check is not valid towards purchases made on MENARDS.COM®. By submitting this rebate form, you agree to resolve any disputes related to rebate redemption by binding arbitration and you waive any right to file or participate in a class action. Terms and conditions available at www.rebateinternational.com®
There are many types of roof design that you can use to add to your shed. But since you are a beginner, I would advise you to build a simple roof structure so as to avoid the frustrations that can come with building complex roof structures. Complex roof structures also require additional tools and greats skills hence, it is time consuming and a bit expensive compared to the simple roof structure.
Ambitious recyclers build sheds from existing materials, like doors, reclaimed lumber, windows, and the ever-popular crates. If you are on a tight budget but really want a shed, research the DIY projects featured on social media, in books, and home and garden websites like The Spruce. Whatever you decide, try to follow through with the project. You don't need the added stress of a half-finished shed every time you walk out your back door.
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.
When building the floor frame, which includes the mudsill, floor joists and perimeter band joists, use 2 x 6 or 2 x 8 pressure-treated lumber. Many prefab sheds use untreated construction-grade lumber for the floor frame, which is fine--if you plan to keep your shed indoors. Even in ideal conditions on the perfect site, a shed floor will be exposed to some moisture, and in time, untreated lumber will rot.
It is worth mentioning that the files in this program can be easily downloaded into PDF format. This provides you with each access at your construction site. The best part is that you can easily browse through different shed plans on your server, and pick the ones that meet your specific project needs and requirements. You can even download everything on your server. The process is very easy to access and understand.
· Saltbox sheds — they are a very attractive type of sheds which one would not mind having it anywhere in the compound. Due to its shape, it can be used to store larger amounts of items and can be used in different ways depending on their size as they come in different sizes. They are also used as children playhouses. As in the gable shed, this type of shed has two faces of roofs which meet at the center to form a peak. The only difference between the two sheds is that the saltbox sheds one of the roof sides is significantly shorter than the other.
If you buy heavy galvanized hardware designed for farm buildings for your shed, it’s overkill. Buy heavy-duty closet door hardware instead. It’s not really meant for outdoor use, but when it’s protected by an overhang, it holds up well. And if the roller bearings get corroded, it’s simple to replace the entire hanger mechanism. Check out Johnson Hardware’s 111 track and 1025 ball-bearing hangers.
Build your own shed and you'll instantly have increased space for your tools, a place to work on DIY projects and a way to keep your garage free of clutter. There are many shed plans online that show you how to build your own shed from scratch using wood. It may be easier, however, to use a kit to create a resin, metal or plastic shed instead. A storage shed kit contains all the materials you need including trim. This Home Depot project uses the Keter Stronghold Resin Shed Kit to show you how to build a shed from a kit. We also offer a large variety of other types of shed designs to choose from. Like most, this DIY shed requires tools like a power drill and step ladder to put it together, but assembly instructions will vary by kit. Make sure to follow the manufacturer's instructions carefully.
I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.
Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.
×