When I tried my first woodworking project, all I wanted to is quit it even before I completed and most of my measurements went wrong, leaving me frustrated. Are you the same? Did you waste the materials, resources, money, time and energy doing it? Have you been to the DIY stores only to come back with hopeless things that turned out to be unfit taking around half a year or an entire year to complete the wooden shed? To change that, you should avoid the doubling over of materials, shorten the time and reduce the invested energy as well.​

This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.
• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.

DIY Storage Shed Kits are the same price as a regular shed. We simply partially assemble the shed kit and send it as a package for you to assemble. If you wish to have Sheds Unlimited assemble the shed kit for you there is an extra cost from 25% to 40% depending on the type of storage shed or prefab car garage you wish to purchase. The prefab cost is also added to any options on the building. In addition, there may be extra storage shed kit shipping charges depending on your location.


We built the Colonial-style garden shed shown here from a set of mail-order building plans. The 10 x 16-ft. outbuilding has easy-to-install plywood siding, three large windows and two pairs of doors. The entire building could be used for storage, but we decided to divide the interior space into two separate areas: a 4 x 10-ft. tool-storage area and a 10 x 12-ft. children's playroom.


How big should a garden shed be so it can be practical without occupying more space than it has to? Well…it depends. I think this cute little garden shed from acultivatednest has one of the smallest possible footprints. The fact that it’s small but tall allows it to be quite practical. It’s great for the storage of garden tools and there’s even some room for a shelf or two or for a few hooks on the walls.
The Dip treated sheds are made of components which are usually lowered into the tanks of preservatives even before the panels are assembled. This is a low-cost process that can be done simply, and also it encourages the manufacturers to use a wide variety of treatments making the shed types available for the DIYers. There are recognisable given that they usually come in golden brown due to the preservative dye that is added. Most of the manufacturers offer you around 10-year guarantee on dip treated sheds along with anti-rot treatment, but one has to recoat every year or the alternative year.​
For the masonry of the foundation we went out and bought 15 cinderblocks, and suplemented these with clay bricks that we got for free off of kijiji and some concrete pavestones from a neighbor's old patio.  Clay bricks can only be used above ground, other wise they will erode.  Looking back, it would have been easier to simply use cinderblocks and we strongly recommend it if you don't have other materials to get rid of.  Also, buy more mortar than you think you will need.  We ended up using a lot of mortar and if you have any extra you can always return it or pour it in the cinderblocks like we did to make the foundation even stronger.
The framing is the most important part of the above-ground structure because it stiffens up the plywood boards and supports the roof.  You will need a lot of 2x4's, and a way to attach them.  We used this as an excuse to buy some new air hammers from canadian tire.  We were able to get the lumber for the entire project delivered by a company called Tamrack Lumber.  They brought out a truck and dropped off all the supplies.  For the roofing you will need little plates with groups of nails sticking out of them which I believe are called joist plates.  These are used on the angles to keep them from shifting.  The last thing you will need is a way to cut all of the 2x4's.  To do this we borrowed a very nice miter saw from a friend for a few days.  It is much easier if the cutting tool can cut on angles, otherwise you will be left to improvise when cutting the peices for the roof.

Copyright © 2019. All Rights Reserved. 3DSHEDPLANS™ is officially registered and protected trademark in the United States. Owned & operated by Netholics Media, LLC. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission or any other requests, please get in touch with us using the contact form provided. Use of this website constitutes acceptance of the 3DSHEDPLANS.COM’s User Terms and Privacy policy.
You can even go online and look up prices!  For example, if you visit lowes.com, they have a search box where you can enter in the item and find out each price!  This will save you some time.  The only drawback I see to this is that I find it really beneficial to go to these big box lumber stores and see exactly what I want.  For example, the LP Smartside siding panels I recommend to use:  some stores carry a cheap variation of these that have a brown color to them on the inside of the panel, and this is not what you want!  The have the consistency of a 'fibre' panel that will crack easy.  The true LP siding panels are pre-primed on the outside surface and have a natural osb color on the inside surface.
The variety of different shed designs is huge so no wonder you might be feeling stuck with finding the best shed plans – especially if you’d like to find shed plans free and available for instant download. Well, don’t worry any longer since we’ve compiled together the absolute best small shed plans and garden shed plans. These premium-quality free plans are all you need for building the perfect shed for your home!
Siding panels made from oriented strand board cost far less than solid wood or plywood panels, and come preprimed, saving you money and labor. Since the panels are also structural, you don’t need an additional layer of sheathing under the siding. You’ll save about $500 over the cost of cedar plywood siding. It’s the perfect material for constructing inexpensive storage sheds.
A thing you might want to check is if regulations require a minimum setback from the property line. This is often overlooked and come back to bite you. A silly thing I found out when I built my shed, my jurisdiction in California treats buildings differently depending on what they are called on the permit. I called my shed a barn because I built a gambrel roof and it looked like a barn. My surprise....A barn must be 50 feet away from any structures occupied by humans. A shed can be almost against the house.....same size, same shape,,,just different names.
×