It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
If you have the do-it-yourself skills and an open timeframe, check out the various plans available online or for purchase. Make sure you thoroughly understand the instructions and actually have the ability and tools to do the job. Other sources for sheds include prefabricated buildings that you would order from a reputable company and kits. Some include pre-cut lumber that is shipped to your house. Before ordering, find out if additional milling, drilling, or cutting will be needed, along with necessary tools.

I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!
Building a shed has lots of advantages which can vary for each person. For example, you could use the shed as a storage space for bicycles in winter. Another option is to use the shed as a storage space for large equipment like the lawnmower or the garden tools. You could also use the shed as a workspace whenever you’re doing DIY projects which is quite funny because the shed itself can be one such project. If you’re the recycling type, you can put a hatch on the side specifically for this purpose and place the bins inside. In any case, a sturdy shed can serve you for many years to come and the shed plans offered on todaysplans show you how to ensure that.
Don’t assume that you’re missing something if you have a question that cannot be answered within the guidelines of the shed plans. Builders at all levels will always have questions and it is better to ask the question than miss something important in the process. Go online and find a forum or a video if you have a question. Better yet, read all the little print that you skipped over in your shed plan and see if the answer is there, it might be.
The plans I purchased were not as described in the web advertising. In additon, I also purchased some addons/upgrades and was supposed to receive a link in a separate email to download these 'extras'. I never received the email with the link. I have contacted them twice thru their customer service support from and the following popup appears after you submit your request: YOUR TICKET HAS BEEN SENT Do allow up to 2 days for a reply from our support team. Do note that our helpdesk is closed on weekends. Tickets submitted during this time will be answered on Monday. I have not received any response from them nor has my purchase price been refunded as was promised in their ad - see below: P.S - Remember...you have my 100% Risk Free 60 Days Money-Back Guarantee - you can still keep any bonuses as my gift - if the product is not exactly as it is stated here and you are unsatisfied - I'll refund your money.. Apparently Mr. ********* has made a practice of not responding to...
In reality, the Ryan Shed Plans also known as MyShedPlans Elite; is a huge collection of different wood construction plans, craft designs, shed blueprints, storage shed designs, birdhouse designs, garage designs, rocking horse sheds and even the end table designs. All the plans that are contained in Ryan Shed Plans contain step by step instructions like you have expected, and therefore, these are more than just mere designs. They naturally include a variety of blueprints of the same shed design the plan, the elevations, the sections, perspective of the shed, a description, legend containing the materials, tips and tricks but a few of them admittedly are not as designed as the rest.​
· Personal belongings storage shed — as you are growing older each and every day, you may tend to accumulate so many items that congest your house. You may not want to throw or give away any of the items accumulated as they probably hold a sentimental value to you. The best way in which you can solve a headache is by building yourself a shed which you can be storing your personal items as you continue accumulating them.
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.
I can’t believe the amount of plans your able to offer for the price. I’m planning on building a summerhouse at the bottom of the garden next month, and I have a rough idea of how I’d like it to look. What I do need is some help with plans and an idea of how much it’s going to cost. Looks like that’s all covered now! With 12000 projects included, I’d put money on it that there’ll be at least one design close to the one in my head. In fact I’m going to. Seams like a sure bet to me. Cheers Jack!
I did my wall studs and roof rafters at 24″ on center, so I used 2 x 6’s for the roof. Also, I made loft storage in the rafters of the front and back 5′ or so and left the middle 6′ or so open for access to the lofts and better lighting. I left the lower cords out in the middle trusses and reinforced them with hurricane ties and extra blocking. To better support the front and back loft floors I doubled up the lower cords on the front and back truss and on the two on either side of the opening and then floored the lofts with 2/4″ plywood. I also put four 14″ x 14″ plastic skylights in tht roof over the center open area to let additional light in.
Compromises are a part of life when you don’t have enough to support your dreams. Ever wanted that Lamborghini but settled for another sedan instead? Luckily, you won’t have to do this with your shed. While a professional woodworker would cost you thousands of dollars to build your dream shed, with us it’s only a few bucks or even free. That’s right! Our free and premium plans are all that you need. We have a wide variety of more than 40 free and premium plans of almost every dimension possible. We guide you on how to build and design the sheds. Whether you are looking for an exquisite addition to your garden or a sturdy shed to keep your tools in, we have them all for you right here!
It isn’t a requirement that this shed be built against a wall—but the structure is designed to take advantage of the wall for strength. So if you modify it to be a freestanding shed, you’ll need to build a conventional stud wall across the back and face it with the same type of plywood siding used on the rest of the shed. For information on how to mark, cut, and fasten wall studs, see How to Frame an Interior Wall (ignore the part about working with drywall because you’ll be using exterior-rated T1-11 siding instead).
My Shed Plans by Ryan Henderson is a comprehensive collection of over 12,000 easy to follow, step-by-step Shed and Woodworking Plans. Plus, you are getting an additional 400 Woodworking Plans. What I don’t like about My Shed Plans is I will never ever build a fraction of these Amazing Shed Plans. There is just too many Shed Plans for a weekend warrior like myself.

Build the framework for the side walls. The bottom plate of each side wall should be the same length as the distance between the bottom plates of the front and back wall (so that the side walls will fit between them). The standard spacing between vertical wall studs in the US is 16 inches (from center to center, not from edge to edge); since this stud spacing doesn’t perfectly divide into the total length of the side walls in the example design, the two outermost studs make up for this discrepancy by being slightly closer to their neighbors. Most importantly, the top plate is angled so that the roof will be sloped, which makes the height of each vertical stud slightly different. If you’re not sure how to calculate the necessary height of each vertical stud in advance, make the two outermost vertical studs first, lay them the correct distance apart, cut a top plate that spans this distance, and then cut each remaining vertical stud individually based on the distance between the top and bottom plates at that exact location.[8]
Well, not these plans. You have the option of building a very functional and spacious lean-to shed on different foundations. Your foundation choices are a concrete slab, a wooden floor supported by concrete piers, or a wooden floor supported by skids. That lost option also means that your lean-to could be mobile as well so you won’t have to decide where you want to permanently put it.
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.

I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.

The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.


Staining: There are two types of staining. These can either be natural where the stains are purposed to enhance the beauty of the wood or unnatural means which involve activities like painting the wood. In natural means, one has to keep maintaining it frequently as they last for approximately two years while unnatural means last as long as up to eight years without needing any maintenance.
Now, imagine a price you think you might have to pay for such a comprehensive package – sure you will think not less than a few hundred at least. The good news is that Ryan is offering all of it at an unbelievable price of just $37. I am sure you were quite blown away when you heard about the quantity and quality of the shed plans and the bonuses you would be getting with them. So, doesn’t $37 for so many useful resources on woodworking sounds like a great idea. In my opinion, surely it is. Once, you have this collection in your arsenal, you are never going to run out of ideas. That is assured.

@diy-plan: Thank-You for your best wishes on the Isacc, believe we always lose sleep when one is on the way. Your advice on not buying factory kit sheds I am 100% in agreement with, they are poor quality lumber, never pressured treated, steldom last more than ten years, here they are lucky to make it six years. I was asked to put one together by a friend after her son bought it for her as a gift, I almost had to rebuild it and when I was finished I thought what an ugly building. Five years later it had termites. When a shed is built on a wood base the base must be anchered into the earth, I have seen sheds flipped upside down after a storm when they are not anchored. I built a shed for a workshop a few years ago to build custom canoes in it, to make it storm ready I used OSB under the siding, then cross braced the studs, insulated it, then covered the studs on the inside with 5/8 inch plywood. The windows have storm shutters that I built for them, if this building fails in a storm I hope I am near the Canadian border.
Our backyard storage shed plans are defined by their cost effective quality construction and simple to build designs. Their construction includes 2x4 framed walls, T1-11 grooved plywood siding, asphalt roofing and a strong sandwich construction door. You can buy shed plans with different pitches of roof slopes The lower pitched roof and simple trim make them easy and inexpensive to build. If you are looking for storage shed plans that are designed to be easy to build from and as cost effective as possible, the backyard shed plan line is your best choice.

These plans are for saltbox roof style sheds.  They are built with trusses that you build.  These sheds are perfect for general storage, garden sheds, tool sheds, potting sheds, playhouses and more.  This shed in my opinion, if you are wanting to build a shed for gardening, this is the one.  It has lots of charm and character with it's desirable design.


I'm looking about spanning 15' for a gazebo. trying to figure out what dimension beams I need. The Gazebo will be 15'x10'. How big will the beams have to be. at 1/2 the distance on 15' I will have a perpendicular beam running to carry 2x4's running parallel to 15' beam edge. I live in California in there with be no roofing material.. I will be using redwood for lumber Thanks
For $37, I’d say that My Shed Plans is worth giving a try. There’s nothing more rewarding than having the freedom to pick your own shed design and building it with your own two hands. Taking a different route to building a shed will probably yield less than desirable results, and where would you even start? You could easily rack up $37 in mistakes and wasted time and effort just trying to freestyle it.
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
Would we do it again? I won’t sugar coat it, this is real life so probably not. Some things aren’t worth the aggravation or the stress. In the end, we didn’t save that much money by building the shed ourselves. I think the total cost was around $1200. But I can tell you one thing, if we are ever attacked by zombies or if there is an Armageddon I am hiding in the shed because the big bad wolf can huff and puff and nothing is taking this structure down. 
My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer.
So I recommend paying for the basic package, browsing the terrible selection of blueprints, saving the URL, then demanding a full refund. You'll get all your money back, plus you can keep all the crummy blueprints you purchased. Just make sure you contact ClkBait (or whoever they are) directly, Ryan's shed goons will try to stall your refund if you go through them.
My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer.
Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.

So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
Ryan had a difficult time building his own first shed. Wrong material, wrong measures, wrong techniques, all of them didn’t help in making the shed any quicker. It took him 6 months to complete his first shed project, and at the end of it he was worn out and exhausted. Even after spending a lot of time reading and purchasing woodworking books, blueprints, nothing seemed to work. Most of the shed plans he bought lacked vital information which left him with more questions than answers. That is when he decided to leave it all aside and build his own shed plans. That was the beginning of his work towards building his master collection of shed plans.
There are over 12,000 different shed plans and woodworking endeavours for you to choose from, so the projects are pretty much endless. You are given everything you could possibly need to build your own beautiful outdoor shed. For those who already have years of woodwork and carpentry experience, My Shed Plans may not offer you enough information that you don’t already know. The only benefits you’ll get from the package are the innovative shed blueprints and designs, which can be help enough.
A lean to shed is the perfect way to build up against a fence or wall and still have plenty of room in your yard. It also keeps water away from the structure you are building up against. The lean to shed design is the simplest design of shed to build because of its single plane sloping roof which makes the roof easy to build. We have many different configurations and sizes either with double or single doors. The larger lean to designs include optional plans to build the doors on any side of the shed. Our smaller lean to style sheds have a 4 in 12 pitch roof and our larger designs have a 2 in 12 pitch roof to keep the overall shed height lower and help reduce shed construction costs.
This garden shed is the tiniest, but that’s the beauty of it – it’s exactly the right size to store your gardening tools. As there are more details (all in order to give you more storaging options), it might take a little longer to build this shed than the others, also the makers of the plan have said it cost around $400 to build this, but the shed is definitely one of a kind and worth the efforts.
I'm on my third Central vac over a period of 15 years. All have been Kenmore. I have a 2500 sq ft home, I vacuum every day. Aways burn out the power head, hence why I am shopping again. I have flooring & carpet throughout. I want lots of power& a hose that doesn't kink (what a pain that has become) I refuse to spend more than $700, as they just don't last. Any suggestions? I've been checking out Electrolux........
After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.
Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
This is nothing but a pyramid scheme in disguise. Don't spend the first $37.00, they lead you to believe that you are getting discs and actual plans until you pay $37.00, then they tell you that you have to download everything but at an additional price. I'm calling the Fraud Department at the Texas State Attorney Generals office and reporting them.
Sheds are once in a while additionally re-recolored or varnished now and again for stylish and wood assurance reasons. Fire and, in a few areas, termite assault, are likewise potential issues. The damage to wooden sheds can be prevented by applying preservatives when they are exposed to rain, UV light, harsh climate, fungal attacks, insects etc. If you add oil or stain, the wood shed can be made to stand out in the garden given the style it can even blend with the surroundings. Some prominent type of woods like Cedar is resistant to water damage, naturally.

Compromises are a part of life when you don’t have enough to support your dreams. Ever wanted that Lamborghini but settled for another sedan instead? Luckily, you won’t have to do this with your shed. While a professional woodworker would cost you thousands of dollars to build your dream shed, with us it’s only a few bucks or even free. That’s right! Our free and premium plans are all that you need. We have a wide variety of more than 40 free and premium plans of almost every dimension possible. We guide you on how to build and design the sheds. Whether you are looking for an exquisite addition to your garden or a sturdy shed to keep your tools in, we have them all for you right here!
After the concrete is all ready, the sole plates are then joined together with the anchor plates which protrude out of the foundation. Use the carpenter’s pencil and measuring tape to mark about one and a half inches from the board end continually every sixteen inches till the further end. These marks guide where the studs will be placed. Mark where the anchor and the mudsill meet up with a different marker from the one used initially. The studs are then taken and galvanized nails are driven through the marked areas into the center of the board until they reach the stud bottom. The studs should be secured to the baseboard.
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well. 
×