The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.
Complete the siding, then remove the toe-screws and move the wall aside to make room for constructing the opposite wall. Use the same chalk line template and process to build the opposite end wall. Figure C shows framing details for the front wall. Mark the curves on the 2×10 header pieces using the trammel setup shown in Photo 12 and Figure G. Cut them with a jigsaw. When you’re done building the front and back walls, set them aside so you can use the platform to build the roof sections.
You will, however, need to follow the approved plans and details without making changes. Also, a basic site plan that shows the outline of your property, house, and proposed shed location will need to be submitted, along with the plans. Be sure to indicate all existing structures (pool, fences, retaining walls, etc.) on the site plan. Forms are usually available for completing the site plans. Two sets of plans are typically required, for the approval process.
I just want to let you know that your Driver was a pleasure to deal with. He placed the shed perfectly into a tight spot and then took the time to make sure it was level and sitting properly. I feel any other company would of placed it as close as possible to where i wanted it and would of been on their way. He also noticed (I would of never noticed) that the door didn't line up perfectly when closed and made some adjustments.
You can even go online and look up prices!  For example, if you visit lowes.com, they have a search box where you can enter in the item and find out each price!  This will save you some time.  The only drawback I see to this is that I find it really beneficial to go to these big box lumber stores and see exactly what I want.  For example, the LP Smartside siding panels I recommend to use:  some stores carry a cheap variation of these that have a brown color to them on the inside of the panel, and this is not what you want!  The have the consistency of a 'fibre' panel that will crack easy.  The true LP siding panels are pre-primed on the outside surface and have a natural osb color on the inside surface.
Build rafters across the roof and separate them with blocking. These should overhang the walls of your shed for increased weather protection. Again, your measurements will be greatly simplified if you space the rafters the same way that you spaced your floor joists. When you’re done, attach pieces of blocking between each pair of rafters along the top plates.[10]

• Failure to account for climate — some people build sheds without considering the weather patterns experienced in the area. The shed ends up being exposed to harsh climatic conditions, continued exposure of the shed to such adverse climatic conditions lead to its destruction. This then leads to one spending much more money to repair the shed. The most common way in which people fail to protect their sheds from is rainwater and snow by failing to have the necessary protecting tools such as gutters and drainage trenches. Gutters are important as they direct rainwater away from the shed hence protecting the shed from getting destructed by rainwater and melting snow that is on the roof. Drainage trenches direct the water that falls directly to the ground away from the shed. These methods keep the wood used to build the sheds dry and hence they do not absorb moisture that may encourage the growth of fungi on the wood. As we have seen earlier, it is also important to coat the wood with protective coats as paint to prevent them from coming into any contact with moisture.
• Purchase of two small sheds — it is dangerous to underspend just as it is to overspend. This is because you may underspend and the shed purchased may end up being of little use below your expectations. This will prompt you to build another shed and that will lead you to overspend. A shed may look simple on the outside but it is how you customize your shed that will determine the volume of goods your shed can hold. When building your shed it is important you identify each and every section of your shed, allocate the tools to each section and then modify the shed to hold each and every tool at its place. In that manner, you end up maximizing each and every space in your shed and also utilizing your shed to its maximum capability. It is also recommendable to have adequately spaced sheds where one can perform outdoor activities like car repairing in the shed when the weather is not favorable. Before starting your shed building, think of all its purposes and all the outdoor and semi-outdoor activities one could perform during unfavorable weather condition or any other related circumstances.
Since outdoor space is limited in a big city, everyone knows you must make smart use of vertical real estate. For a greenhouse/shed in San Francisco's Bernal Heights, Step 3 Studio designed in an open-framework structure that provides shelter for a garden shed that stores potting materials and plants on the ground floor. A steel staircase was built on site, which leads to a second level surfaced in steel grid mesh. The higher elevation is the perfect spot for container plants that require more sun. It's also a nice place to hang out and enjoy views of the city, day or night.
For the shed's floor deck, use ¾-in. exterior-grade plywood; anything thinner will flex between joists. (Note that a double layer of ½-in. exterior ply is okay, too.) If you plan to store heavy items, such as a lawn tractor or woodworking machines, consider using ¾-in. tongue-and-groove plywood. This costs slightly more, and is a bit more troublesome to install, but its edges lock tightly together, creating a rock-solid, rigid floor. In areas with excessively high moisture and large numbers of wood-boring bugs--such as Florida, Alabama and the other Gulf Coast states--consider using pressure-treated plywood for the floor deck. It's particularly resistant to moisture and insects.
Don’t be tempted to get sloppy when you square up the floor and walls of your shed. An out-of-square start will haunt you through the rest of the project, from doors and windows to trim and roofing. For a concrete slab, measure diagonally across the opposite corners of the form boards. Then adjust the forms until the diagonal measurements are equal. Do the same for a wood platform floor. If you’re installing sheet siding on the walls, before you stand them up, measure diagonally and square up the wall before you nail on the siding.
This step by step diy woodworking project is about diy shed plans. If you want to learn more about how to build a shed in your backyard, we recommend you to pay attention to the instructions described in the article. Work with attention and invest in high quality materials, as to use the shed for many years in a row. Plan everything from the very beginning, including the building permit that is required in some cases.
It’s vital to build your shed on a stable, level location—and never in a wet, low-lying area or on a downward slope. And no matter how well a shed is constructed, it won’t hold up on a weak base. A proper foundation is key, one that sets the shed slightly off the ground to aid water drainage and reduce moisture transfer. There are different foundation options, depending on where you live and the size and intended use of the shed, so bone up on the fundamentals and assess your options with this advice from the LP Outdoor Building Solutions team.
At times, this information may seem overwhelming. You need to consider buying a program that provides you with all the information in a simple and concise manner. It is important to understand the value of your effort, money and time. One of the most common and biggest problems with online tutorials and guides is that they give just a glimpse of what you are buying. Thus, you don’t have a clear idea of what you are getting into.
As I mentioned above and it won’t hold you anything back, proving worthy of every penny that you have spent. In case if you are making the rightful purchase by spending $37.00, you will indeed receive incredible content for every penny you have spent. You can also have additional discounts given based on the season. After the purchase, you will also receive a Premium Bonus package if you pay an additional amount of $30. The Premium package as the name says contains stuff that is much beyond the regular package. But if you feel that the regular package is enough, you don’t have to purchase it.
The front wall has a 6-foot-long top plate and two 1-foot-long bottom plates, leaving space for a 4-foot-wide door. The four wall studs are 81 1/4 inches long; install them as shown in the front framing detail at left. Next, install the 73-inch-long jack studs, and then attach the 51-inch-long doubled header. Finally, attach the 6 1/4-inch-long cripple studs.

When you start to look at the plans, you realize some are absurdly out of date, or impossible to read because they are blurred - just like everyone else has reported on this site. What was even more appalling was it appeared most, if not all of what I had purchased, was easily available for free online. Some material looked as though it may have been pilfered - or "borrowed without permission or attribution from educational sites. And much of the "VIP-Premium" content was past its copyright - which is great if you want a children's woodworking book from the 1800's for historical purposes, which I'm sure is a fascinating read, but all that was ultimately meaningless since the sum total of what I downloaded offered nothing of any immediate benefit toward building a shed from a quality, step-by-step plan, with 3-D renderings, Material lists, and best practices, etc to help you build quickly, efficiently, and have something you can use and be proud of. I think the only proprietary plans must the the freebie they give away to entice you to pony up.

Before we can finish the base we need to get the electrical ready.  Put a peice of conduit over your electrical wire to protect it from any damage it could receive while you are finishing the base and to give the shed a more finished look.  Make sure the pipe and wire inside are pointing up perpendicular to the ground and are preferably going straight to the location where your first outlet will be.
Also square the frame by making sure diagonal measurements from opposite corners are equal. Then tack one corner to hold it square. Finally, nail the soffit to the roof frame with 6d galvanized box nails. We used 12-in.-wide fiber cement siding for soffit material. Mount an inexpensive carbide blade on your circular saw to cut the fiber cement. Set the roof panel aside and build the other half of the roof using the same techniques.
• Purchase of two small sheds — it is dangerous to underspend just as it is to overspend. This is because you may underspend and the shed purchased may end up being of little use below your expectations. This will prompt you to build another shed and that will lead you to overspend. A shed may look simple on the outside but it is how you customize your shed that will determine the volume of goods your shed can hold. When building your shed it is important you identify each and every section of your shed, allocate the tools to each section and then modify the shed to hold each and every tool at its place. In that manner, you end up maximizing each and every space in your shed and also utilizing your shed to its maximum capability. It is also recommendable to have adequately spaced sheds where one can perform outdoor activities like car repairing in the shed when the weather is not favorable. Before starting your shed building, think of all its purposes and all the outdoor and semi-outdoor activities one could perform during unfavorable weather condition or any other related circumstances.

Are you one of those people who love woodworking and seek joy out of it? If yes, well you might already know that every woodworking project requires a certain amount of time and effort to be invested in it. In some cases, it’s almost the same as the construction projects, and many people say that building a wooden shed is synonymous to building a brick wall. Even when it’s easy and simple, you should have adequate knowledge to successfully implement the design plan.
A backyard shed frees up your home and garage by storing cumbersome essentials like your riding mower, hedge trimmers, and other lawn care equipment. But these sturdy little buildings can serve a host of other practical functions—and hobbies too. Think chicken coop, greenhouse, screening room—the list is limitless! For a shed to live up to its potential, however, it’s crucial to avoid common building mistakes. The dos and don’ts listed here, courtesy of the LP® Outdoor Building Solutions® pros, will help ensure that your shed meets your needs for years to come, whether you’re simply using it for storage or tricking it out as your outdoor fun zone.
At times, this information may seem overwhelming. You need to consider buying a program that provides you with all the information in a simple and concise manner. It is important to understand the value of your effort, money and time. One of the most common and biggest problems with online tutorials and guides is that they give just a glimpse of what you are buying. Thus, you don’t have a clear idea of what you are getting into.

Our 14 by 24 one car garage was delivered and set up early November. The truck pulled up shortly before 7 am and left by 5 pm after the garage was completed and cleaned inside and out. Two carpenters worked tiredlessly without even a lunchbreak to make sure that everything was complete by the evening. Despite the workpressure the always had a kind word and did not mind to answer our stupid questions. We haven't seen such a work ethics for quite some time. On top of it, the garage looks terrific and matches the style of the house. When asked I will recommend Sheds Unlimited without any reservation - a job very well done!
This is another shed building tip about the location of your shed. While it would be great to let your shed blend into the shrubbery on your property, but it isn’t really realistic. You want to allow your shed to breathe which means giving it space from trees, fences and shrubs. A few feet all around will let the materials breathe effectively and direct sunlight will ensure mold and mildew stay far away.

To be honest, I almost named this project “How to Build a Shed from Scratch with your Spouse and Not Bury them Under the Concrete.” Working together as a team in life is one thing, but working together on a home DIY project is another. It’s like being on a drunken see-saw with “stay out here and work with me, but don’t get in my way.” Or, “keep me company, but don’t talk to me” How about, “just play with the kids while I work but keep them away from what I’m working on” Or even “Get me this tool, get me that tool, where are my tools? Don’t touch the tools” As it turns out that title is just a bit too wordy anyway, so I had to shorten it up a bit.

By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.
Make a template on the shed floor for assembling the trusses. Begin by laying out the parts for one truss. Align the bottom chord with the edge of the plywood floor. Then cut four 24-in.-long 2 x 4s. Lay two alongside each rafter and screw them to the plywood floor. Now use these short boards as stopblocks for laying out and assembling each truss. Fasten plywood gussets to each side of every truss with carpenter's glue and 1-in. roofing nails and set the trusses aside.

You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
· Personal belongings storage shed — as you are growing older each and every day, you may tend to accumulate so many items that congest your house. You may not want to throw or give away any of the items accumulated as they probably hold a sentimental value to you. The best way in which you can solve a headache is by building yourself a shed which you can be storing your personal items as you continue accumulating them.
In a perfect world, all of the studs would be straight, but since they aren’t, make sure to pick the best ones to use at corners and at door and window openings. Sight down the length of the studs and set aside the ones that are perfectly straight. While you’re at it, also set aside studs that are really crooked. You can cut these up to use as cripples or blocking. You may find other uses for short pieces later on.

All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!


Made from durable blow molded resin, this Alpine shed from Suncast comes complete with 14 windows with delightful contrast trim. The double doors are built with articulating metal hardware so they’re robust and durable. The floor is reinforced for the ultimate sturdy foundation. Extra roof support is provided by the metal trusses and ridge beaming. This shed is perfect when you’re looking for something that is built tough, and stands out beyond the more flimsy and cheap designs that you find on the market. It is large enough to stow everything that you need and keep all items clean, safe, and secure. The outer appearance of this shed makes it perfect for those who want an attractive external design that doesn’t stick out like a sore thumb in your yard. All in all, customer reviews across the board are quite positive for this shed, and it makes a great addition to anyone’s home.
I'm looking about spanning 15' for a gazebo. trying to figure out what dimension beams I need. The Gazebo will be 15'x10'. How big will the beams have to be. at 1/2 the distance on 15' I will have a perpendicular beam running to carry 2x4's running parallel to 15' beam edge. I live in California in there with be no roofing material.. I will be using redwood for lumber Thanks
There are over 12,000 different shed plans and woodworking endeavours for you to choose from, so the projects are pretty much endless. You are given everything you could possibly need to build your own beautiful outdoor shed. For those who already have years of woodwork and carpentry experience, My Shed Plans may not offer you enough information that you don’t already know. The only benefits you’ll get from the package are the innovative shed blueprints and designs, which can be help enough.
×