Now you have finished your shed!  Once your doors are on, you can add latches and locks.  The windows on our shed are made of 1/4 inch thick plexiglass held in with white silicone to match the trim.  The floor was finished with concrete tiles. You can now choose to leave the inside of your shed barren, to say, store a few larger items, or you can add shelves like we did.  We added the shelves because we had a lot of small boxes and things that we wanted to move out of the garage.  They are made from 7/16 inch thick oriented strand board and 2x2s.  The shelves in the middle have some spare 6x6 chunks keeping them up, which is suitable because they are the deepest and are designed to hold the heaviest items.  They are so strong that you can climb on them, even jump on them!  We also added a bike rack on the right hand side that can hold our five bikes.  The finishing touch on the shed was to add an electrical outlet and a flourescent lighting fixture with a switch.  There is a vent in the back wall for warm summer days but it is probably unneccesary.  Hopefully you can build your own storage shed and de-cluterize your life as well.  Thanks!

Ditto. It's a scam because, like many other Internet scams of this nature, they have used bogus "review" sites they created themselves (I checked with ICANN) to falsely pump up their value. They charge your credit card immediately, without allowing you to review your purchase, and most importantly, they have ripped off a lot of the "product" from either free sites, such as universities, or even commercial sites that surely don't realize that their product is being used this way. They also have false promises, such as that all the plans will have instructions,etc. Not so, It's just a crazy compliation of junk they scoured off the Internet, repackaged in what seems like about a half hour. Totally bogus.

But I've never drilled a pilot hole in my life, so what do I know. No seriously, unless it's super delicate or thin, I just use the impact driver and make it work. Sure, sometimes the wood splits a bit, but I don't care about looks and most of my projects are built with pallets and discarded stuff anyway. But the thought of predrilling every hole?? And messing a corded driver?? Come on dude, that's laughable!
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center. 

I'm looking about spanning 15' for a gazebo. trying to figure out what dimension beams I need. The Gazebo will be 15'x10'. How big will the beams have to be. at 1/2 the distance on 15' I will have a perpendicular beam running to carry 2x4's running parallel to 15' beam edge. I live in California in there with be no roofing material.. I will be using redwood for lumber Thanks
From start to finish, it may seem a little intimidating, but just take it one step at a time. The nice thing about building a shed is that it starts off easy (layout the foundation, building the floor, etc.), and by the time you get to some of the more daunting tasks (like the roof), you would have gained a lot of confidence/experience working your way to that point.
If you plan to paint your shed, natural wood siding isn’t necessary. You can buy sheets of OSB (oriented strand board) siding at a fraction of the cost of real plywood, and it’ll probably last longer too. LP SmartSide panel is one brand. You can buy plain, grooved or stucco-like panels in several thicknesses and sizes. Ask at your local lumberyard to see what’s available.
Build the framework for the side walls. The bottom plate of each side wall should be the same length as the distance between the bottom plates of the front and back wall (so that the side walls will fit between them). The standard spacing between vertical wall studs in the US is 16 inches (from center to center, not from edge to edge); since this stud spacing doesn’t perfectly divide into the total length of the side walls in the example design, the two outermost studs make up for this discrepancy by being slightly closer to their neighbors. Most importantly, the top plate is angled so that the roof will be sloped, which makes the height of each vertical stud slightly different. If you’re not sure how to calculate the necessary height of each vertical stud in advance, make the two outermost vertical studs first, lay them the correct distance apart, cut a top plate that spans this distance, and then cut each remaining vertical stud individually based on the distance between the top and bottom plates at that exact location.[8]
Remember that anything you build will either add or detract from your property's appearance and may impact your property value. Metal and vinyl materials may be easier to maintain, but are the least expensive options and tend to look cheap. Natural wood and prefinished wood products will add character and value, but are typically more expensive to buy and maintain.
· Saltbox sheds — they are a very attractive type of sheds which one would not mind having it anywhere in the compound. Due to its shape, it can be used to store larger amounts of items and can be used in different ways depending on their size as they come in different sizes. They are also used as children playhouses. As in the gable shed, this type of shed has two faces of roofs which meet at the center to form a peak. The only difference between the two sheds is that the saltbox sheds one of the roof sides is significantly shorter than the other.
You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
Search the hashtag #vintagetrailers on Instagram and you'll discover some 80,000 images of big, small, and mid-sized aluminum travel trailers from roughly the 1950s to 1970s. You might find gleaming silver Airstreams at a lodging rental in Joshua Tree or parked temporarily at a campground near Yellowstone. One trend that hasn't lost steam is the backyard she-shed trailer escape, a dolled-up adult playhouse where women--or men--can escape for alone time or hang out with friends and a bottle or two of wine.  There's even a Vintage Trailer Magazine for enthusiasts. This vintage Aljo trailer rests in the backyard of a house in Pasadena, California.
If you're always in a hurry and terrible with commitments, I might suggest you rent a storage space or continue parking your forty thousand dollar cars in the driveway and save your garage space for unused furniture, bicycles, unpacked boxes, garden rakes, and lawn mowers. Because, the biggest enemy in do-it-yourself is not the lack of carpentry skills or ability to follow directions, but lack of planning and failure to schedule the time it takes to get the job done.
Victoria, Australia-based Archiblox designs and makes sustainable, prefabricated modular residential and commercial projects. This simple, straightforward, and modern structure can be used as a studio, office, guest house, or pretty much whatever you desire. Modules can be grouped together for larger spaces and are designed to subtly echo the geometrical arrangement seen in nature.
If you decide that you don’t want the second package after purchasing the first package, you will be offered a third package which is even more explicit that contains tonnes and tonnes of woodworking plans that are laid over thousands of pages. All these eBooks are neatly organized, very much real and indeed the amount of plans that they contain might even come out as nauseating, if you’re someone who doesn’t have so much of patience to go through all of them.

• Wastage of space — this is one of the greatest mistakes one can make. It is mostly caused by poor construction planning. You may such a mistake also by taking measurements poorly. You should consider all the activities and purposes that you will use your shed for before starting the construction. In that manner, you will be able to come up with a shed design that will suit its purpose and your wishes. One may also consider building a double floor shed to save on your compound space. You wouldn’t want to deny your kids their playing ground! You may also want to construct a different structure in the future then you get hindered due to the little space left or unless you would have to dig deeper into your pockets to modify your shed.
×