In reality, the Ryan Shed Plans also known as MyShedPlans Elite; is a huge collection of different wood construction plans, craft designs, shed blueprints, storage shed designs, birdhouse designs, garage designs, rocking horse sheds and even the end table designs. All the plans that are contained in Ryan Shed Plans contain step by step instructions like you have expected, and therefore, these are more than just mere designs. They naturally include a variety of blueprints of the same shed design the plan, the elevations, the sections, perspective of the shed, a description, legend containing the materials, tips and tricks but a few of them admittedly are not as designed as the rest.​
Firewood sheds are simple sheds designed to help your firewood dry out and also keep it from getting a lot of water on the wood when it rains or snows. The simple open front design allows the wood to be easily accessible and increases air flow around the stacked wood. The floors are designed using 2x4 boards spaced 1" apart to provide plenty of strength and allow allow air to circulate up through the floor and around the wood to season it properly. The roofs are corrugated metal but they can also be roofed with asphalt shingles.
• The ceiling is too low — these may tend to be one of the least concentrated on problems as they happen least when one expects. It is important to be aware of the low ceiling so as to save on your funds in putting a higher one. Ensure that each and every measurement is taken carefully and is also executed. The best way to determine the height of your shed is by scanning through the items you are planning to store there and use the tallest. As mentioned earlier, the installation of steep roofs might be risky but in the long run become an added advantage as they create more space inside the shed.

Omit the bird’s-mouth from four rafters and use these on the ends. Cut the 2x4s for the ridge and subfascia to length and mark the rafter positions on them. Line up the rafters with the marks and nail through the ridge and subfascia with 16d nails to secure them. When the roof frame is complete, line up the subfascia with the chalk line on the platform and tack it in three or four places with toe screws to hold the frame straight while you install the soffit.
A few decorative touches can help your shed fit in with the architecture of your home and even convey how you use it. Some folks like to dress things up with a front porch, dormer, or gable, but simply adding barn-style doors, shuttered windows, and a bit of gingerbread trim can make all the difference. Color, of course, goes a long way too. Check out all the options at the LP Shed Gallery, where you’ll also see details on the materials used. Inspired by the seemingly endless possibilities, you’ll emerge motivated to create a shed you’ll be proud to show off!
Once you’ve received the package and all it entails, you can begin creating your own outdoor shed whenever you feel ready. The only time you need to exert the effort is when you’ve begun construction. When you do decide to start, make sure that you have a decent amount of time as well as motivation to carry through the whole project. You don’t want to be left with an unfinished shed out in the yard, a constant reminder that you tried and failed.

Included with your instant download will be email support from me about any questions you might have on how to build a shed or about the plans or construction methods covered. I am very pleased to offer this service for the low price I charge, but believe it or not, I don't get that many support inquiries and I feel this is because of the comprehensive nature of the plans for all the information needed to successfully build your own shed.

These days, it is not very easy to translate your wooden shed plans into a standard written format without losing any valuable information. In order to learn how to build high quality wooden sheds, it is important to consult an expert. However, consulting an expert may not be viable for every individual. In addition to this, the internet provides you with extensive information about a wide range of subjects.


A backyard shed frees up your home and garage by storing cumbersome essentials like your riding mower, hedge trimmers, and other lawn care equipment. But these sturdy little buildings can serve a host of other practical functions—and hobbies too. Think chicken coop, greenhouse, screening room—the list is limitless! For a shed to live up to its potential, however, it’s crucial to avoid common building mistakes. The dos and don’ts listed here, courtesy of the LP® Outdoor Building Solutions® pros, will help ensure that your shed meets your needs for years to come, whether you’re simply using it for storage or tricking it out as your outdoor fun zone.
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
Nothing dresses up a shed like brackets. They’re the ultimate low-effort, high-impact feature. In some cases they also provide extra support for your gable-end overhang. Depending on the design, you can build brackets from 4x4s or by laminating 2-by boards. Make a full-scale drawing to work out the details. Then build the brackets and attach them to the shed. Install the brackets tight to the underside of the overhang, and then notch the fascia board to fit over them.

If you have a router, use a hinge-mortising bit (or straight bit) to cut the hinge recesses (Photo 10). Otherwise, use a sharp chisel. Screw the hinges to the door and trim. To hang the door, line up a temporary 2×4 with the bottom of the siding and screw it to the wall. Then rest the door on the 2×4 and drive 3-in. screws through the trim into the framing to hold the door in place (Photo 11). Finish the door installation by adding the top and side trim pieces.
Now, imagine a price you think you might have to pay for such a comprehensive package – sure you will think not less than a few hundred at least. The good news is that Ryan is offering all of it at an unbelievable price of just $37. I am sure you were quite blown away when you heard about the quantity and quality of the shed plans and the bonuses you would be getting with them. So, doesn’t $37 for so many useful resources on woodworking sounds like a great idea. In my opinion, surely it is. Once, you have this collection in your arsenal, you are never going to run out of ideas. That is assured.
Ryan’s Shed Plans is going to turn you into the ultimate builder – a builder of sheds, a builder of greenhouses, a builder of tiny homes, and a builder of many things. And nope, no previous experience is needed. This unique online program breaks down the steps to building over 12,000 different types of sheds in such a way that anyone can build the shed of their dreams, sans all the frustration and confusion that often comes with most woodworking projects. It’s like a “Building For Dummies” guide that teaches you the accurate steps needed to build everything from a garden shed to a storage shed, greenhouse, and more. So, if you’re tired of finding building plans that are missing steps, that don’t make sense or worse, that don’t accurately list the measurements or tools needed, you need to give Ryan’s Shed Plans a look.
• Violations of building codes — before the beginning of construction of your shed, it is important to check for the building conducts set by the authorities in your town. You are not supposed to begin any construction works before applying for a permit from the local authorities. This helps you avoid a lot of time being wasted in lawsuits, paying fines and such inconveniences. If you had already begun building your shed before your permit is authorized by the authorities, they will demand you to start all over again. That leads you spending more money on the construction of the shed. During fitting of electric lighting, you are supposed to involve a legally certified electrician to avoid the long arm of the law and to avoid accidents as electrocution and even fire. The same laws apply to gas and water pipes installation.

Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?


We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
The program consists of a wide range of downloadable files, which contain many different step by step instructions and plans related to woodworking. These tutorials are focused on a wide range of projects, such as potting shed plans, wood shed plans, storage shed plans, garage storage plans, house plans and more. All the shed plans discussed in this program are divided on the basis of each project type.
Assemble the four wall structures. Wall structures are usually nailed to the underlying support from the bottom up. However, if this is not possible with the design you’ve chosen, simply nail them downwards through the plywood and joists or toenail them into place by driving the nails downwards and at an angle. Note that you will probably need other people to help you hold the wall structures up until they can be attached to one another.[9]
No shed, regardless of how well it's built, will last long if it's set on a weak base. Most sheds can be supported by an on-grade foundation, which consists of solid concrete blocks or pressure-treated wood timbers set directly on the ground. The concrete blocks or timbers (aka skids) must be leveled and spaced closely enough to properly support the shed's floor frame. Note that it's important to use solid concrete blocks, not hollow wall blocks, which can easily crack.
Don’t assume that you’re missing something if you have a question that cannot be answered within the guidelines of the shed plans. Builders at all levels will always have questions and it is better to ask the question than miss something important in the process. Go online and find a forum or a video if you have a question. Better yet, read all the little print that you skipped over in your shed plan and see if the answer is there, it might be.
When you nail on the siding, make sure it overhangs the framing on each side by 3-1/2 in. and that you’ve trimmed off the top corner to follow the slope of the angled top plate (Photo 2). Attach the siding with 2-in. galvanized or stainless steel ring-shank siding nails placed 8 in. apart along studs and 6 in. apart along the edges of the sheets. You’ll have to nail blocking between the studs to support the top edge of the siding and the Z-flashing.
We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
Ryan had a difficult time building his own first shed. Wrong material, wrong measures, wrong techniques, all of them didn’t help in making the shed any quicker. It took him 6 months to complete his first shed project, and at the end of it he was worn out and exhausted. Even after spending a lot of time reading and purchasing woodworking books, blueprints, nothing seemed to work. Most of the shed plans he bought lacked vital information which left him with more questions than answers. That is when he decided to leave it all aside and build his own shed plans. That was the beginning of his work towards building his master collection of shed plans.
For example, the last three sheds I built were trimmed with white PVC trim boards instead of painted cedar 1 x 4s. This new plastic lumber, which I used for the rake, fascia, frieze and corner boards, is impervious to bugs, warping, splitting or decay, and it never needs painting. Other low-maintenance options include: vinyl or aluminum windows, faux-slate roof shingles, fiberglass or steel doors, composite decking for steps, and fiber-cement siding. (I don't usually recommend aluminum or vinyl siding for sheds; neither material is rugged enough to survive the inevitable beating outbuildings take.)

I just want to let you know that your Driver was a pleasure to deal with. He placed the shed perfectly into a tight spot and then took the time to make sure it was level and sitting properly. I feel any other company would of placed it as close as possible to where i wanted it and would of been on their way. He also noticed (I would of never noticed) that the door didn't line up perfectly when closed and made some adjustments.
Please note that fully assembled buildings and storage shed kits are the same price. This is due to the fact that storage shed kits from Sheds Unlimited are typically assembled in the manufacturing facility. The walls are temporarily put together as though the building was to be delivered as a unit. This allows us to be sure that the parts are properly assembled and also allows us to paint the garden shed kit. Since the DIY shed kit is painted in our facility, it should only need some touch up paint after it is assembled on your property.
5 Popular and Best Paving Materials for Your Driveway Based on your goals and needs, you can take your pick from some of the commonly used driveway landscaping materials listed here: Asphalt Concrete Gravel Pavers Shell A driveway can be a really attractive feature of your home that people encounter first, so be wise to opt for the best paving material for your driveway!
Building something yourself, especially something as big as a shed, is always rewarding, but not only will it feel good to have a self-made beauty in your backyard, it’s times lower in cost than buying a shed. In fact, building a small shed can cost as little as $100! That’s a pennysaver! And well, all proper DIY wood projects should be, ain’t that right?
You can even go online and look up prices!  For example, if you visit lowes.com, they have a search box where you can enter in the item and find out each price!  This will save you some time.  The only drawback I see to this is that I find it really beneficial to go to these big box lumber stores and see exactly what I want.  For example, the LP Smartside siding panels I recommend to use:  some stores carry a cheap variation of these that have a brown color to them on the inside of the panel, and this is not what you want!  The have the consistency of a 'fibre' panel that will crack easy.  The true LP siding panels are pre-primed on the outside surface and have a natural osb color on the inside surface.
· Firewood storage sheds — mainly used to store firewood from elements of weather such as rainfall that may destroy them. The most common type of firewood shed is the lean on shed. It is also the most suitable as it allows free circulation of air, therefore, preventing dampness of the firewood. It is also near the house so the firewood is stored near your house and may access anytime you need them.
As you can see, I have no pictures of the doors being created.  This is because they took way too much trouble to make, and I didn't really have the patience to take pictures of them being built because they were tested and redone about 3 times.  Lesson to be learned:  leave the tolerances bigger than you think they will need to be, you can always use weather strips to help close them up later.  After 3 attempts, we finnally got the doors to work properly.  The one door is held in place with sliding dead-bolts to the floor and ceiling frames and the second door is attached to it with another dead-bolt.
There are many types of roof design that you can use to add to your shed. But since you are a beginner, I would advise you to build a simple roof structure so as to avoid the frustrations that can come with building complex roof structures. Complex roof structures also require additional tools and greats skills hence, it is time consuming and a bit expensive compared to the simple roof structure.
We decided to construct the foundation of our shed out of cinderblocks.  This will help keep out any rodents, and doesn't risk harming the trees beside the shed.  In order to lay a good foundation, we first had to level out the ground. We didn't need to level out the middle of the structure's base because that was later filled with limestone screening.  We made channels for the cinderblocks with spades and a pickaxe, and made sure to create a channel for the electrical as well.  The electricity comes from our house, which is about 10 feet away from where the shed stands.
This 8×15 shed from Lifetime is entirely constructed in the USA, and comes equipped with two shatter proof windows, shutters, and side entry with 6 skylights for stunning illumination within. The powder coated steal A frame roof trusses and reinforced steel internal wall structure are made of durable polyethylene. The high grade metal screws make it incredibly easy to assemble this shed. Additional airflow is provided by the peak screen vent cap. You also get the added benefit of UV-protection that helps to prevent fading and cracking over time. This storage unit can be used year-round and comes with a fantastic 10 year limited warranty from the manufacturer. The floor of this unit is built so tough that it will never crack, peel, or chip. It’s also slip-resistant and resistant against stains, oils, and solvents. All in all, this is a fantastic shed for those looking for something that is built tough and built to last.

One look at everything you receive with this program and there’s no way you’ll ever opt to pay someone tons of money to do the exact steps that you have right in front of you. Ryan’s Shed Plans is the smart, affordable and easy way to build whatever it is that you want in your backyard. Whether it’s a rustic yard shed, a cottage shed, a garden shed, a gambrel barn or something else, you finally have all the (actual) steps needed to easily build it on your own. The program comes with way more than just a couple of project plans. Instead, it provides with you 12,000 different shed plans to choose from. So, if you want a shed with glass walls or a shed that’s perched on a porch, there’s a plan for it.


If you plan to paint your shed, natural wood siding isn’t necessary. You can buy sheets of OSB (oriented strand board) siding at a fraction of the cost of real plywood, and it’ll probably last longer too. LP SmartSide panel is one brand. You can buy plain, grooved or stucco-like panels in several thicknesses and sizes. Ask at your local lumberyard to see what’s available.

Finding MyShedPlans seemed too good to be true; 12k shed plans, 3-D renderings, detailed material lists, but wait, there's more! Hundreds of useful guides, woodworking books, and project ideas ranging from birdhouses to bridges. And what was more, was the promise of an easy download and immediate access to boundless amounts of material so I could be right on my way to a sharp new shed.
Because most DIY manuals and plans are written by ghostwriters who don’t know anything about carpentry, it is common to find incomplete guides. This package is different. Ryan has spent time and effort ensuring that his expertise is laid out in a way that anyone can follow. After all, he is an educator. You also save because the plans make sure you don’t waste material.
A few decorative touches can help your shed fit in with the architecture of your home and even convey how you use it. Some folks like to dress things up with a front porch, dormer, or gable, but simply adding barn-style doors, shuttered windows, and a bit of gingerbread trim can make all the difference. Color, of course, goes a long way too. Check out all the options at the LP Shed Gallery, where you’ll also see details on the materials used. Inspired by the seemingly endless possibilities, you’ll emerge motivated to create a shed you’ll be proud to show off!
When choosing where to build your shed, choose a flat dry spot on your property. This will make it easier to excavate and level it out, and ensure that you build on a dry surface. Avoid building your shed in a low lying area that is prone to water collection or you’ll find your shed flooded after a big rain. Too much water means rotting wood, blistering paint and rusty hinges and none of that will highlight how hard you worked to build this shed.

By searching online you can find some free shed plans that are decent. Most often though these plans will be geared towards more experienced builders and they will not be very detailed. If you are a first time builder look for plans you can understand, even if it means paying a little. Use plans that contain a material list and plenty of details if this is your first time. Most free plans available are not as detailed with the building steps, so free is not always a good idea. If you go to the top of this page I have provided a list of some of the best plans from reputable websites.


After laying out the 12 blocks, use a straight 2 x 4 and a 4-ft. level to ensure that all the blocks are level. Shim up any low blocks with strips of asphalt roofing, cedar shingles or 2-in.-thick concrete patio block. Next, form each front and rear band joist by nailing a 2 x 6 to a 2 x 8 mudsill. Set the mudsills on top of the blocks running across the front and rear of the shed. Cut a third 2 x 8 mudsill to fit along the tops of the center row of foundation blocks.
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.
We have a large selection of small horse barn plans, tack rooms and run in shed plans. Each of our designs comes with a materials list and construction plans to help you save time and money when you build. We have many different sizes of horse barns including one, two, three and four stalls. Most of the barns and run in sheds are designed to be built with pine board and batten siding on the outside and a 4' tall Oak kick board on the interior.
My Shed Plans provides you with numerous benefits, such as easy to understand language, ease of access, properly organized plans and more. Besides these benefits, the program also contains a wide range of features to make everything easier for you. These features and benefits make this program stand apart from the competition. This is a unique program easily available in the market. The program offers a lot to people who want a shed in their backyard or garden. Here are some key features of the program that make it an exceptional choice :

High-quality materials may cost a bit more, but they’ll save you time, trouble, and money in the long run. The chart here shows how LP® SmartSide® Panels compare with untreated plywood, vinyl, and galvanized metal. No wonder so many pros recommend sheds made with beautiful, durable LP products! If you want your shed to resist splitting, cracking, decay, and termite damage while duplicating the good looks of rich, real cedar, choose LP SmartSide® products.
Please Note: Prices, promotions, styles and availability may vary by store and online. Inventory is sold and received continuously throughout the day; therefore, the quantity shown may not be available when you get to the store. This inventory may include a store display unit. Online orders and products purchased in-store qualify for rebate redemption. Mail-in Rebate is in the form of merchandise credit check, valid in-store only. Merchandise credit check is not valid towards purchases made on MENARDS.COM®. By submitting this rebate form, you agree to resolve any disputes related to rebate redemption by binding arbitration and you waive any right to file or participate in a class action. Terms and conditions available at www.rebateinternational.com®
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.

Because My Shed Plans does not promise anything beyond belief, the product’s foundation is pretty strong. People have enjoyed choosing between the collections of shed layouts and building it themselves. It’s a great activity for the whole family, since it’s all well planned out. It can be a bonding experience, the way a team building exercise at work is.
×