The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.


Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.
A garden shed can be strictly functional, but it can also be a decorative focal point around which you design your garden or yard. These plans will help you build a basic shed, but don’t stop there! To customize your shed, you could create a combination toolshed and greenhouse, put a martin house on top, or use part of the shed for a chicken coop or rabbit hutch. If you’re feeling even more adventurous, you could create a living roof of moss or succulent plants.
Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.

The construction of a wood foundation is usually built using pressure-treated 2x6 lumbers. These parts are called the band on the ends and the joist in the middle of the band, spaced out 16-24 inches apart. The foundation frame will sit on top of pressure-treated 4x4 posts called skids. The skids will set on the cinder blocks or on top of gravel to prevent rot.


A shed could double as a greenhouse, in which case you can use the shed plans provided on instructables. In this particular case, the shed was built out of old windows. An old window isn’t exactly something you can repurpose easily but here it’s a perfect fit. The first step is to gather enough windows. After that, it’s time to build the frame and you’ll need some wood for this part. Make sure the foundation is secure before you screw in the windows.
My advice... Don't do-it-all-yourself. Novice and pro alike can benefit from each other in DIY. You might have the shed location leveled by a landscaper; get a referral to outsource the shed's foundation to a building subcontractor; you can even have the roof's trusses made by a local truss company and the shingles installed by a handyman or roofer.
It is worth mentioning that the files in this program can be easily downloaded into PDF format. This provides you with each access at your construction site. The best part is that you can easily browse through different shed plans on your server, and pick the ones that meet your specific project needs and requirements. You can even download everything on your server. The process is very easy to access and understand.
I think that we had to purchase some additional hangers that were built especially for bike tires. This system worked pretty well, one comment that I have is that they don't hold up to the weight of several combined bikes as well as I would like. You need to make sure that the track is anchored very often, as having hooks in between anchor points starts to flex the main rail and can result in the hooks popping off.
Edrington used recycled and repurposed materials to build the shed. Restored garage doors were used for the south wall to allow light to filter through, good for seedlings. The floors are made of recycled brick on sand. A pull-down ladder leads to the second floor, where the architect built beds and tables as a cozy sleeping nook for his grandchildren. In the afternoons, Edrington and his wife enjoy a cup of tea in the shed.

Would we do it again? I won’t sugar coat it, this is real life so probably not. Some things aren’t worth the aggravation or the stress. In the end, we didn’t save that much money by building the shed ourselves. I think the total cost was around $1200. But I can tell you one thing, if we are ever attacked by zombies or if there is an Armageddon I am hiding in the shed because the big bad wolf can huff and puff and nothing is taking this structure down. 

If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
×