It can be easy to get excited and overestimate your DIY abilities when you start a new project. The passion and excitement makes you want to dream big and get creative. But blindly following your imagination can be a step in the wrong direction. If you’re a newbie to DIY woodworking, then you’ll probably want to keep it simple. Otherwise you run the real risk of ending up with a sub par build or even having to rebuild it altogether.
I have 3D shed models for all most all of these shed plans. Use these models to walk inside or around your shed while you are building to see all the details in virtual reality to make your shed building project easier. You can even use your smartphone, laptop, virtual reality goggles with the augmented reality feature to see what your shed will look like in your back yard.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
Once you’ve received the package and all it entails, you can begin creating your own outdoor shed whenever you feel ready. The only time you need to exert the effort is when you’ve begun construction. When you do decide to start, make sure that you have a decent amount of time as well as motivation to carry through the whole project. You don’t want to be left with an unfinished shed out in the yard, a constant reminder that you tried and failed.
When you start to look at the plans, you realize some are absurdly out of date, or impossible to read because they are blurred - just like everyone else has reported on this site. What was even more appalling was it appeared most, if not all of what I had purchased, was easily available for free online. Some material looked as though it may have been pilfered - or "borrowed without permission or attribution from educational sites. And much of the "VIP-Premium" content was past its copyright - which is great if you want a children's woodworking book from the 1800's for historical purposes, which I'm sure is a fascinating read, but all that was ultimately meaningless since the sum total of what I downloaded offered nothing of any immediate benefit toward building a shed from a quality, step-by-step plan, with 3-D renderings, Material lists, and best practices, etc to help you build quickly, efficiently, and have something you can use and be proud of. I think the only proprietary plans must the the freebie they give away to entice you to pony up.
I like to use the hip roof design, it is pleasing to the eye, it is the best roof for high winds, certainlly a good idea with the hurricanes and tropical storms found in South Florida. I always build my sheds on a raised concrete slab for stability, I also use double hurricane ties. All studs and rafters are pressure treated because of the area's termite problems. I always anchor the shed to the concrete slab with expoy bolts. I never use T11 siding it does not hold up well in a subtropical climate. I use OSB under the siding and I often cross brace. I prefer a metal roof screwed down not nailed using water gasket screws. I generally use ridge vents or a wind turbine to help cool the shed and I also use Bahama shutters for the same reason. I build with rafters not trusses so I can keep the celling open to also cool the shed. This makes the shed expensive but after twenty years of use one of my oldest sheds which received proper up keep is still perfect. So which is cheaper one shed for life or one after every major windstorm? I know the answer because I had one shed stand up to a huricane!
So it's not surprising that people often ask me for advice about putting together a backyard storage building. Sometimes I get asked questions that I couldn't possibly answer: "Do you think my husband and brother-in-law can build me a garden shed?" Or, "Would an 8 x 10-ft. shed be big enough to store all my stuff?" Gee, ma'am, I couldn't say. But often, the questions have something to do with shed design, framing or siding options. There, I can help. And so with these inquisitive souls in mind I present my favorite tricks of the shed trade.
To be sure, the whole permitting process can be a bit intimidating. And, if I'm being honest here, I've never been comfortable dealing with the city and all their codes - seems they're always moving the line on me. But, I always make it a point to be friendly with the Building Inspector. He's there to help and can be a fountain of information, when building your wood shed.
Thanks for sharing such detailed plans Seamster. I'm hoping to build a very small lean-to tool shed (2.5X4.5' base) for my very small yard and this has given me a lot of insight. Currently, theor the table and mitre saws I inherited are stored in our spare bedroom... eventual nursery room. I want to get them into their own space outdoors sooner than later. Here in North Carolina with the humid summers I think it would be best to add some housewrap to the walls to help protect the tools. I also have a situation where the back wall will only be 4-6" off the house so need to construct/panel my walls before erecting them. Do you know if it's reasonable to panel then wrap each wall frame, side it and then finally erect and fasten? Would be very grateful for your thoughts!
One last thing about shed sizes, it’s a good idea to always measure out the dimensions in your own garden before you invest any money. You can do this easily by using a couple of stakes and a string to measure out the space. That’s how the pros do it. Make sure that you leave enough room on all sides of the shed to help with rain drainage and prevent water damage.
Can you believe that building this cedar shed costs less than $300?! Yes, you read that right – a retail price for something similar can be around $1600, so this is one heck of a good deal. Not only is it incredibly good looking and budget friendly, it’s big enough to store all your outdoor items yet it won’t get in your way thanks to the compact design.
Build the framework for the back wall. Make the top and bottom beams (a.k.a. the plates) the same length as the length of the floor which they sit. To keep your measurements simple, make the spacing between the vertical studs identical to the spacing between your floor joists. Note that the back wall should be lower than the front wall so that the roof slopes and directs rain away from the door.
The Glidetop Slide Lid shed from Suncast features an ultra tough resin construction that makes it one of the most long lasting and easy to maintain sheds on the market. The gliding lid makes walk-in access quite easy, and the reinforced floor makes the shed perfect for tractor support. Perfect for storing all kinds of things, like patio furniture, mowers, bikes, and wheelbarrows. It’s easy to lock the shed and protect everything inside, year-round. The extra secure roof on the Suncast is what makes it really stand apart from its competition. It doesn’t stand too tall, so if you need to keep your shed below fence level then this is the ideal model for you. Suncast is one of the leaders in durable, affordable sheds, and this model is a great choice if you’re looking to save a little money and still have a storage unit that is going to last you for years to come. The assembly of the Suncast is incredibly easy and requires minimal tools to set-up.
I have spent a truckload of time on the same for five years by purchasing and reading Woodworking books, going through woodworking plan blueprints and understanding woodworking designs. While some of them are very detailed most of them left with questions more than answers because of the incompetency and inadequacy in the design details. I haven’t come across a single plan that had everything I needed, forget the step by step instructions.
If you need lots of space for storage, garden room, or office space, the most common design will be the gable shed. The gable roof design has two sloped roof that resembles a little house. This design is the most popular because it blends will with your home. The gambrel shed resembles a barn. It is great for storage as no space will go to waste. A larger size gambrel shed will have enough room to build a loft. Having a loft will keep everything organized and allow you to store more stuff. By installing a ramp to the shed you can also store ATV, snowmobiles, jet skis, trailers, and such things.
We’re not going to tell you that all pre-made sheds are bad. On the contrary, if you spend enough money, you can buy a pre-made or so-called ‘flat-pack’ shed and it’ll last you a very long time. However, buying a pre-built shed will cost you double, triple or even quadruple what it would cost you to build your own. DIY sheds are cheaper to build than pre-made sheds, and because you are building them yourself from scratch, you can be sure of the quality. This is a key point, because with a pre-made or flat-pack shed, you can never be sure that the lumber being used is of good quality, or even if it came from sustainable sources (if that’s important to you).You can also put your mark on a shed you build yourself. Feel free to mark the lumbar you use to show off your workmanship, and feel free to modify the design of the shed however you like. You won’t be constrained by building your own shed either, meaning you can add shelves and intricate design features as you go along. Until now, the only option you had was to hire a professional to build your shed since you never had the knowledge to do so. But, today is your lucky day! Welcome to 3DSHEDPLANS™, where we offer gable, lean-to and hip shed plans that come with a complete list of tools, accessories, hardware and material you would require to do the job yourself. And, it’s not that difficult at all! Our plans come with detail instructions, 3D dimensions, list of materials and even highlighted points where you need to nail to attach the lumber. What else would you require to start working on your shed right away?
For $37, I’d say that My Shed Plans is worth giving a try. There’s nothing more rewarding than having the freedom to pick your own shed design and building it with your own two hands. Taking a different route to building a shed will probably yield less than desirable results, and where would you even start? You could easily rack up $37 in mistakes and wasted time and effort just trying to freestyle it.
The sheds available can be distinguished easily as they come in pale green that eventually fades into silvery grey. The Pressure treated sheds are relatively a bit costlier than the DIP treated sheds and the advantage of using them is that they don’t need further preservative treatment and can serve the whole during the entire ten years saving a lot of time and money.
These days, it is not very easy to translate your wooden shed plans into a standard written format without losing any valuable information. In order to learn how to build high quality wooden sheds, it is important to consult an expert. However, consulting an expert may not be viable for every individual. In addition to this, the internet provides you with extensive information about a wide range of subjects.