We now need to create a base that we can nail the frames for the walls into.  We did this with four 2x8's and some bent i-bolts along with a lot of mortar.  The basic process was that we bent the bottoms of the i-bolts after heating them with a blow torch, and then anchored these in some of the holes in the cinderblocks with a lot of mortar.  Then we drilled holes in the 2x8's where the i-bolts were and put these on top and screwed them in.  The frames can now be solidly attached to the base with the framing hammer.
A garden shed can be strictly functional, but it can also be a decorative focal point around which you design your garden or yard. These plans will help you build a basic shed, but don’t stop there! To customize your shed, you could create a combination toolshed and greenhouse, put a martin house on top, or use part of the shed for a chicken coop or rabbit hutch. If you’re feeling even more adventurous, you could create a living roof of moss or succulent plants.

It can be easy to get excited and overestimate your DIY abilities when you start a new project. The passion and excitement makes you want to dream big and get creative. But blindly following your imagination can be a step in the wrong direction. If you’re a newbie to DIY woodworking, then you’ll probably want to keep it simple. Otherwise you run the real risk of ending up with a sub par build or even having to rebuild it altogether.
@diy-plan: Thank-You for your best wishes on the Isacc, believe we always lose sleep when one is on the way. Your advice on not buying factory kit sheds I am 100% in agreement with, they are poor quality lumber, never pressured treated, steldom last more than ten years, here they are lucky to make it six years. I was asked to put one together by a friend after her son bought it for her as a gift, I almost had to rebuild it and when I was finished I thought what an ugly building. Five years later it had termites. When a shed is built on a wood base the base must be anchered into the earth, I have seen sheds flipped upside down after a storm when they are not anchored. I built a shed for a workshop a few years ago to build custom canoes in it, to make it storm ready I used OSB under the siding, then cross braced the studs, insulated it, then covered the studs on the inside with 5/8 inch plywood. The windows have storm shutters that I built for them, if this building fails in a storm I hope I am near the Canadian border.
• Stagnant waters — As much as the wood is coated to protect it from water, it would still be advisable to keep the wood away from stagnant waters. This is as the wood coating is not a permanent coat and so is the wood is exposed to water it will get damaged over time. The best way to avoid water paddles near the shed is building gutter systems on its roof which directs the water to a tank or a pool.
The walls of the foundation have been created and the electrical is all set, now all that needs to be done is to fill the gaping hole in between them with limestone agrigate.  We also threw in some concrete paving stones that we had lying around because we don't plan on using them and we had already tried to give them away.  After the limestone is in place tamp it down by jumping on it and keep filling up any places that are no longer level.  After the entire base is filled with as much limestone as you can fit put a sprinkler on to soak it and set it for the next hour or so.  You may need to add a bit more limestone after this is done as well.

Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.

It is worth mentioning that the files in this program can be easily downloaded into PDF format. This provides you with each access at your construction site. The best part is that you can easily browse through different shed plans on your server, and pick the ones that meet your specific project needs and requirements. You can even download everything on your server. The process is very easy to access and understand.
For $37, I’d say that My Shed Plans is worth giving a try. There’s nothing more rewarding than having the freedom to pick your own shed design and building it with your own two hands. Taking a different route to building a shed will probably yield less than desirable results, and where would you even start? You could easily rack up $37 in mistakes and wasted time and effort just trying to freestyle it.

You can cut steel roofing panels with a circular saw and a carbide blade, but it’ll save you a lot of work if you order the panels the right length to start with. Plus, you’ll have a greater color selection if you order the roofing rather than buy off-the-shelf panels. Remember to order in advance, though, since it usually takes several weeks for the roofing to arrive. And make sure the overhangs are the right size so the panels will overhang the fascia slightly.
All content on this blog is the property of Just the Woods, LLC. You are welcome to share my content (to include one photo only) as long as you provide a link back the original post. DO NOT copy entire posts, or crop, edit, or remove watermarks from photos without written permission from me first. Sharing a post from Just the Woods in a capacity where YOU will be compensated is not permitted. Thank you!
Shed are also great if you have a hobby. For example, if you’re passionate about pottery, gardening or even painting, you could use the garden shed as your private workspace. You can give it windows if you think you’ll need natural light inside. In fact, this can be an opportunity to upcycle some old windows and doors. Check out this project that we found on countryliving to see how this chic shed was built.
Ryan Henderson is a master woodworker with over 30 years experience and has developed Ryan’s Shed Plans.  This is a detailed digital book with 12,000 shed plans available for instant download with many different bonus offers.  The plans are detailed because they are written by a master woodworker.  He has taught many newbie woodworkers over the past 30 years how to build sheds and other woodworking projects.  He is skilled in the art of woodworking and put together a nice, large set of plans.  The plans are easy to read with step-by-step instructions.
3 The frame of the roof consists of four 2-by-4 rafters cut so that they rest on the front- and rear-wall top plates, as shown in the rafter detail at right. Install a gable stud directly over the center studs on both side walls to fit between the end rafter and the top plate. Install the sub-fascia and then the fascia to the front ends of the rafters.
Among our builder plans, we have developed a wide range of shed designs, which we offer in form of DIY plans. If you purchase them, you will receive a detailed shed blueprints and building instructions, from the foundations to the roof, with precise measurements in both metric and imperial systems and full list of materials required for the shed. Our garden sheds, storage sheds and gazebo plans are created in a way to make the construction process comprehensive and easy to build for anyone. Especially easy are the lean-to shed plans, narrow but spacious, very practical and possible to attach to any building or wall.
Run! Do not walk away from this product! Total scam! The Ryan Shed Plans product promises 12,000 different do it yourself shed building plans. Instead what you get is a whole bunch of disconnected sketches, drawings, And partial blueprints that he has photo copied from hundreds of unrelated sources. I personally have several years of carpentry, homebuilding, and woodworking experience So I assumed that even if these so-called “shed building plans” we’re light on specific details I’d still be able to use them. WRONG! You will find that 99% of the“Plans“ are completely useless for the purpose of building a backyard shed. After an hour of grinding through the files included in that on my download, I did happen upon a singly reasonably complete building plan for a modest shed which included detail dimensions, material list, and the sorts of things needed to actually build a shed. Doing a little more research, I later found where this particular we’ll Drawn to plan had been ripped off from another legitimate Shed building website. Shame on you RyanShedPlans for marketing such a terrible, useless product. Judging from your online sales pitch you are clearly a gifted marketer. If you spent as much time developing a database of legitimate, usable shed plans as you did putting together your totally fraudulent marketing material, you would have an incredible product worth much much more then you’re charging. But I guess you I already know that.
Nail plywood sheeting to the joists to form the floor. If necessary, use H-clips in addition to nailing the sheets into place; these fit between two pieces of plywood and lock them together for additional structural strength. In the example design, two standard sheets of 4- by 8-foot plywood are used whole and a third is sawn in half and used to fill in the 4-foot difference on either end. Because of the spacing of the piers, support beams, and joists, no additional cuts or adjustments are necessary. Note that the pieces of plywood are intentionally misaligned so that the floor doesn’t have a single seam running across the whole thing, which would be a significant structural weakness.
You can build the walls on any flat surface, but the shed platform is ideal. Snap chalk lines on the plywood deck, 3-1/2 in. from the edges of the platform, to indicate the inside edge of the walls. Measure to make sure the lines are parallel and 89 in. apart. Then chalk a line down the center (Photo 1). You’ll use this line to make sure the angled top plates meet in the center.
Start by setting deck blocks on the ground, positioned as shown in the plans. While the area doesn’t have to be perfectly level, you should make the ground roughly level where each block will rest. Temporarily place some straight 2-by-6 lumber on edge in the top grooves of the blocks to orient the blocks in a straight line. Arrange two rows of four blocks parallel to each other to form both long walls, then measure diagonally across the outside corners to determine how square the arrangement is. If the two long walls are parallel, and diagonal measurements taken across corners are equal, then each corner is guaranteed to be 90 degrees. Finish up by placing one deck block in the middle of each 6-foot wall after you have aligned and squared the 8-foot walls.
×